• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.137-142
• /
• 2013

Direction of arrival is estimating for desire signal direction among received signal on antenna in spatial. In this paper, we were an estimation a receiving signal direction of arrival using multi beam forming in radar. We proposed, by signal direction of arrival estimation method, an algorithm which combine spatial correlation matrix weight value and beam steering algorithm in this paper. Through simulation, we were analysis a performance to compare general algorithm and proposal algorithm. In direction of arrival estimation, proposed algorithm is effectivity to decrease processing time because it is not doing an eigen decomposition. We showed that proposal algorithm improve more target estimation than general algorithm.

• Korean Journal of Clinical Pharmacy
• /
• v.3 no.1
• /
• pp.15-20
• /
• 1993

The ability to precisely predict serum digoxin concentration using 7 published methods in a group of 50 patients was undertaken. Two methods of estimating creatinine clearance and two estimates of lean body weight were employed as input variables using the 7 dosing methods. TDX was used to determine the nadir SDCs(serum digoxin concentrations) in 50 in patients meeting predetermined study criteria. All patients, whose ages ranged 19-71 years, had steady-state digoxin levels, were in oral digoxin, and were free from liver dysfunction, thyroid dysfunction and renal failure. The correlation coefficients(r) of predicted versus observed SDCs were determined,. and mean error(ME) was determined for each method to reflect bias, respectively. No substantial differance in predictive reliabliity was evident among the methods studied in total group. Poor correlations existed between predicted and observed SDCs(r<0.4) and these correlations were not significantly affected by age and gender. But relatively higher correlation and lower ME was founded for the CHF group in Jelliffe method(r=0.5, p<0.05).

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.63-69
• /
• 2012

This paper presents a method to derive the theoretical requirements for the development of a 400 mm optical window that transmits dual-band wavelengths and had a stable structure. We also present design and fabrication results. Among the required specifications, the surface figure error was defined by the transmitted wavefront deformation (TWD), ${\lambda}$/15 rms at 632.8 nm. This value was derived by estimating the predicted performances with respect to five independent items that could cause system performance degradation and then calculating the required wavefront error (WFE) to satisfy the performance goals. We measured the image resolution at each performance level to trace and verify the requirements. The article also describes a design optimization process that could minimize the weight and volume of the optical window attached to the payload securing the FOV of the camera. In addition, we accurately measured the deformation that occurred in the series of fabrication steps including processing, coating, assembly, bonding and bolting, and investigated the effects by comparing them to the results of a simulation performed in advance to derive the predicted performance.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.4
• /
• pp.103-113
• /
• 2004

The flat dilatometer test(DMT) is a useful geotechnical tool for estimating in-situ properties of various types of ground materials and the application of flat DMT is increasing. The existing relationships which are used to estimate the design parameters of soft deposit depend on the regional geotechnical characteristics and then it is necessary to investigate the applicability of the flat dilatometer in Korea. In this paper, the flat DMT has been conducted in soft marine deposits. The results estimated by existing relationships and those obtained from laboratory tests were compared. Based on the results, some factors influencing the relationships were examined and adjustment of empirical expression was performed.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.2 s.34
• /
• pp.1-10
• /
• 2005

In this Paper, we propose a new block matching a1gorithm that extracts motion vectors from consecutive range data. The proposed method defines a matching metric that integrates intensity, hue, and range. Our algorithm begins matching with a small matching template. If the matching degree is not good enough, we slightly expand the size of a matching template and then repeat the matching process until our matching criterion is satisfied or the predetermined maximum size has been reached. As the iteration proceeds, we adaptively adjust weights of the matching metric by considering the importance of each feature. In the experiments, we show that our block matching approach can work as a promising solution by comparing the proposed method with previously known method in terms of performance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.89-98
• /
• 1965

The experimental studies were intended to clarify the effects of selection, and also aimed at estimating the heritabilities, the genotypic correlations among some agronomic characters, and at calculating the selection index on some selective characters for the selection of desirable lines, under different climatic conditions. Finally practical implications of these studies, especially on the selection index, were discussed. Twenty-two varieties, determinate growing habit type, were selected at random from the 138 soybean varieties cultivated the year before, were grown in a randomized block design with three replicates at Chinju, Korea, under May and June sowing conditions. The method of estimating heritabilities for the eleven agronomic characters-flowering date, maturity date, stem length, branch numbers per plant, stem diameter, plant weight, pod numbers per plant, grain numbers per plant and 100 grain weight, shown in Table 3, was the variance components procedures in a replicated trial for the varieties. The analysis of covariance was used to obtain the genotypic correlations and phenotypic correlations among the eight characters, and the selection indexes for some agronomic characters were calculated by Robinson's method. The results are summarized as follows: Heritabilities : The experiment on the genotype-environment interaction revealed that in almost all of the characters investigated the interaction was too large to be neglected and materially affected the estimates of various genotypic parameters. The variation in heritability due to the change of environments was larger in the characters of low heritability than in those of high heritability. Heritability values of flowering date, fruiting period (days from flowering to maturity), stem length and 100 grain weight were the highest in both environments, those of yield(grain weight) and other characters were showed the lower values(Table 3). These heritability values showed a decreasing trend with the delayed sowing in the experiments. Further, all calculated heritability values were higher than anticipated. This was expected since these values, which were the broad sense heritability, contain the variance due to dominance and epistasisf in addition to the additive genetic variance. Genotypic correlations : Genotypic correlations were slightly higher than the corresponding phenotypic correlations in both environments, but the variation in values due to the change of environment appeared between grain weight and some other characters, especially an increase between grain weight and flowering date, and the total growing period(Table 6). Genotypic correlations between grain weight and other characters indicated that high seed yield was genetically correlated with late flowering, late maturity, and the other five characters namely branch numbers per plant, stem diameter, plant weight, pod numbers per plant and grain numbers per plant, but not with 100 grain weight of soybeans. Pod numbers and grain numbers per plant were more closely correlated with seed yields than with other characters. Selection index : For the comparison and the use of selection indexes in the selection, two kinds of selection indexes were calculated, the former was called selection index A and the later selection index B as shown in Table 7. Selection index A was calculated by the values of grain weight per plant as the character of yield(character Y), but the other, selection index B, was calculated by the values of pod numbers per plant, instead of grain weight per plant, as the character of yield'(character Y'). These results suggest that selection index technique is useful in soybean breeding. In reality, however, as the selection index varies with population and environment, it must be calculated in each population to which selection is applied and in each environment in which the population is located. In spite of the expected usefulness of selection index technique in soybean breeding, unsolved problems such as the expense, time and labor involved in calculating the selection index remain. For these reasons and from these experimental studies, it was recognized that in the breeding of self-fertilized soybean plants the selection for yield should be based on a more simple selection index such as selection index B of these experiments rather than on the complex selection index such as selection index A. Furthermore, it was realized that the selection index for the selection should be calculated on the basis of the data of some 3-4 agronomic characters-maturity date(X$_1$), branch numbers per plant(X$_2$), stem diameter(X$_3$) and pod numbers per plant etc. It must be noted that it should be successful in selection to select for maturity date(X$_1$) which has high heritability, and the selection index should be calculated easily on the basis of the data of branch numbers per plant(X$_2$), stem diameter(X$_3$) and pod numbers per plant, directly after the harvest before drying and threshing. These characters should be very useful agronomic characters in the selection of Korean soybeans, determinate growing habit type, as they could be measured or counted easily thus saving time and expense in the duration from harvest to drying and threshing, and are affected more in soybean yields than the other agronomic characters.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.6
• /
• pp.1034-1041
• /
• 2010

The oriental medicine Jangwonhwan, which is a boiled extract of 12 medicinal herbs/mushroom, has been prescribed for patients with cognitive dysfunction and it is originally from the Korean medical text, DonguiBogam(amnesia chapter). Recently, a modified recipe of Jangwonhwan (LMK02-Jangwonhwan) consisting of seven medicinal plants/mushroom, was shown to reduce ${\beta}$-amyloid deposition in the brain of Tg-APPswe/PS1dE9 mouse model of Alzheimer disease. The toxicity of LMK02 was investigated in SD rats by oral repeated adminstration for 4 weeks and we tried to determine test does for 13 weeks repeated study. Quality control of tablet form of LMK02 was established by estimating indicative components, Ginsenoside Rg3 of Red Ginseng and Decursin of Angelicagigas Nakai. The toxicity of LMK02 was investigated in 6 weeks old specific pathogen free (SPF) Sprageu-Dawley rats by oral administration. Each test group were consist of 5 male and 5 female and they received doses of 500, 1,000 and 2,000 mg/kg/day of test substance for 4 weeks. The clinical signs, death rate, body weight, food consumption, ophthalmic examination, urinalysis, hematological and serum biochemistry, organ weight and pathological changes were examined and compared with those of control group. Urinalysis : We observed increase of PRO(p<0.01), SG(p<0.01) in female rats of 1,000 mg/kg/day and 2,000 mg/kg/day(p<0.01). Also, we observed increase of pH and KET in female rats of 1,000 mg/kg/day(p<0.05) and of 2,000 mg/kg/day(p<0.01). WBC in female rats in 1,000 mg/kg/day and 2,000 mg/kg/day were on increase. Hematological test : We observed increase of MCV in male rats of 250 mg/kg/day. (p<0.05) Serum biochemistry test : We found increase of CHO in female rats of 2,000 mg/kg/day(p<0.05). During the experimental period, there were no animals dead or moribund. There were no treatment related changes of general symptom, food and water consumption, organ weight and autopsy According to the results of 4-week repeated dose range finding study, the highest dose was established as 1000 mg/kg for 13-week repeated dose toxicity study and we determined to put 2 more groups by common ratio two.

• Journal of Animal Science and Technology
• /
• v.62 no.4
• /
• pp.521-532
• /
• 2020

The production performance of broiler breeder hens in response to different levels of total lysine during the early laying period was investigated. A total of 126 Ross 308 parent stock hens were offered one of seven dietary treatments formulating elevated contents of total lysine ranging from 0.55% to 0.79% (0.04 scale; 133 g of feed) from 23 to 29 weeks of age. Each treatment had six replicates with three birds per pen. Body weight was recorded triweekly and eggs were collected and weighted at 9:00 am daily. One hen from each pen was euthanized to collect blood samples and visceral organs were harvested and weighed. Egg production, egg weight and egg mass were lower (p < 0.05) in hens offered a diet containing 0.55% total lysine compared to those fed the diet containing higher total lysine. Hens offered a diet containing 0.71%, 0.75%, and 0.79% total lysine had greater (p = 0.008) egg production rate compared to those offered a diet containing lysine less than 0.71%. The number of total eggs produced tended to be greater (p = 0.083) in hens offered a diet containing 0.71 and 0.75% total lysine compared to the other treatments. The number of settable egg production was higher (p < 0.001) in hens offered a diet contacting 0.79% total lysine compared to those fed the diet containing lower levels of total lysine. The relative weights of oviduct and ovary were lower (p < 0.05) in hens offered a diet containing 0.59% total lysine compared to the other treatments. No difference found in body weight, the number of total eggs, double-yolk eggs and abnormal shell eggs among the treatments. The urea nitrogen, estradiol-17 beta and progesterone in plasma were not affected by treatments. Based on linear- and quadratic-plateau models, total lysine requirements for egg production, settable egg production and egg mass at the early laying period were to be 0.73%, 0.77%, and 0.71%, respectively. Modern broiler breeder hens likely require higher total lysine than NRC recommendation in a diet for enhancing productivity during the early-laying period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.158-163
• /
• 2018

Perilla (Perilla frutescens var.frutescens) is an annual plant of the Lamiaceae family, mainly grown for obtaining oil by press extraction after roasting the seeds. Oil yield is one of its important traits, but evaluating this yield is time-consuming, requires many seeds, and is hard to adjust to pedigrees in a breeding field. The objective of this study was to develop a method for selecting high-oil-yield lines in a breeding population without oil extraction. Twenty-three perilla cultivars were used for evaluating the oil yield and seed traits such as seed hardness, seed coat thickness, seed coat proportion and crude fat. After evaluation of the seed traits of 23 perilla cultivars, the ranges of oil yields, seed hardness, seed coat thickness, seed coat proportion, 100-seed weight, and crude fat were 24.68-38.75%, 157-1166 gf, $24-399{\mu}m$, 15.4-41.5%, 2.79-6.69 g, and 33.0-47.8%, respectively. In an analysis of correlation coefficients, the oil yield negatively correlated with seed length, seed width, the proportion of seed coat, seed hardness, and 1000-seed weight, but positively correlated with crude fat content. It was observed that as the seed coat proportion increased, the seed coat thickness, hardness, and 1000-seed weight also increased. Multiple linear regression (MLR) was employed to find major variables affecting the oil yield. Among the variables, traits crude fat content and seed coat proportion were assumed to be indirect parameters for estimating the potential oil yield, with respect to a significant positive correlation with the observed oil yield ($R^2=0.791$). Using these two parameters, an equation was derived to predict the oil yield. The results of this study show that various seed traits in 23 perilla cultivars positively or negatively correlated with the oil yield. In particular, crude fat and the seed coat proportion can be used for predicting the oil yield with the newly developed equation, and this approach will improve the efficiency of selecting prominent lines for the oil yield.

• Journal of Bio-Environment Control
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1994

Wind load or snow load, acting on agricultural structures is working more sensitive than any other load and therefore plays an important role in determination of design loads of agricultural structures. In this study, unit snow weight, greatest gust speed and depth of snow fall were analyzed and applied to determine the amount of frames. The unit snow weights were statistically classified and calculated in the basis of mean temperature and showed considerable differences between the unit snow weights at below and above -1$^{\circ}C$. Equations for estimating greatest gust speed with fastest wind speed were developed for inland and seaside districts. The calculated values from developed equations were little higher than those from the current equation in general. The difference between the depths of snow cover and snow fall, which shows the possibility of reduction of design loads under the adequate management. Design wind speed estimated by a modified equation suggested the amount of frames less than those by current one, and the depth of snow fall as a design snow depth suggested the amount of frames more than those of snow cover. Therefore, it is very important to select the adequate design values considering the characteristics of agricultural structures.