• Journal of Nutrition and Health
• /
• 제43권6호
• /
• pp.588-596
• /
• 2010

모유 수유를 받는 영아는 생후 6개월까지 모유에 거의 모든 영양소 섭취를 의존하기 때문에 유즙의 콜린 농도가 영아의 콜린섭취에 영향을 미칠 수 있다. 식품에는 콜린과 베타인이 함께 들어 있고 체내에서 콜린은 베타인으로 산화되어 메칠기 운반에 관여하므로 식품속의 총 콜린 함량만이 아니라 베타인 함량도 함께 고려하여야 한다. 따라서 본 연구에서는 수유기간별 유즙의 총 콜린, 유리 콜린, 베 타인의 변화를 조사하고자 하였다. LC-MS방법을 사용하여 수유부 유즙의 콜린과 베타인 농도를 분석하여 영아의 콜린과 베타인의 섭취상태를 알아보고자 하였다. 1) 모유의 총 콜린 농도는 수유 첫 1개월째 145.03 mg/L (1.39 mmol/L), 2개월째 157.83 mg/L (1.52 mmol/L), 3개월째 165.99 mg/L (1.60 mmol/L), 4개월째 153.67 mg/L (1.48 mmol/L), 5개월째 145.05 mg/L (1.39 mmol/ L)이었다. 모유의 유리 콜린 농도는 수유 1개월 24.96 mg/L (0.239 mmol/L), 2개월 29.56 mg/L (0.284 mmol/L), 3개월 29.40 mg/L (0.283 mmol/L), 4개월 23.41 mg/L (0.225 mmol/L), 5개월 24.03 mg/L (0.231 mmol/L)로 수유월령에 따라 큰 차이는 없었다. 모유의 베타인 농도는 수유 1개월에 4.424 mg/L (0.038 mmol/L), 2개월 3.442 mg/L (0.033 mmol/L), 3개월 3.200 mg/L (0.031 mmol/L), 4개월 2.257 mg/L (0.022 mmol/L), 5개월 2.433 mg/L ($0.020\;{\mu}mol/L$)이었다. 2) 수유기간별 영아의 유즙 섭취량은 2개월에 771.1 mL/d, 3개월에 792.0 mL/d, 4개월에 796.5 mL/d, 5개월에 711.0 mL/d이었다. 3) 영아의 총 콜린 섭취량은 2개월 124.61 mg/d, 3개월 120.90 mg/d, 4개월 126.50 mg/d, 5개월 104.09 mg/d로 4개월까지는 큰 변화가 없었으나 생후 5개월에 크게 감소하는 경향이었다. 영아의 체중 kg당 총 콜린 섭취량은 2개월 19.76 mg/d, 3개월 16.67 mg/d, 4개월 16.14 mg/d, 5개월 12.80 mg/d이었다. 4) 영아의 유리콜린 섭취량은 2개월 24.15 mg/d, 3개월 21.57 mg/d, 4개월 19.35 mg/d, 5개월 17.10 mg/d이었고, 수유기간별로 유의적인 차이는 없었으나 점차 감소하는 경향이었다. 영아의 체중 kg당 유리콜린 섭취량은 2개월 3.85 mg/d, 3개월 2.97 mg/d, 4개월 2.47 mg/d, 5개월 2.08 mg/d이었다. 5) 영아의 베타인 섭취량은 2개월 3.12 mg/d, 3개월 2.82 mg/d, 4개월 2.10 mg/d, 5개월 1.83 mg/d로 유리콜린과 유사한 경향을 보였다. 영아의 체중 kg당 베타인 섭취량은 2개월 0.50 mg/ d, 3개월 0.39 mg/d, 4개월 0.27 mg/d, 5 개월 0.22 mg/d이었다. 6) 영아의 콜린 섭취량은 모유의 콜린농도와는 r = 0.982 (p = 0.000), 모유섭취량과는 r = 0.414 (p = 0.028)로 유의적인 양의 상관관계를 보였다. 이상의 연구결과로부터 한국인 수유부 유즙의 총 콜린농도와 유리콜린농도는 외국인 수유부의 유즙에 비해 결코 낮지 않은 수준이며, 이로 인해 영아의 콜린 섭취상태는 부족하지 않을 것으로 사료된다. 더욱이 영아의 총콜린 섭취량은 모유 섭취량보다 모유의 총콜린 농도와 더 강한 양의 상관관계를 나타냄으로써 모유의 콜린농도가 영아의 콜린 섭취량에 영향을 미칠 수 있을 가능성을 보였다.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.268-281
• /
• 2004

본 연구는 실제 정치망 어장에서의 조류에 따른 어구 형상 변형을 추정하고, 그 변형을 최소화시키며 어구의 기본 기능을 유지시키는데 필요한 수중 현상과 어구 내부용적을 적절하게 유지할 수 있는 설계의 기본 자료를 얻기 위한 목적으로 회류 수조에서 모형실험을 실시하였으며, 흐름에 따른 대뜸의 멍줄에 작용하는 장력, 정치망 내의 유속변화와 그물형상의 변화를 측정하였다. 1. 유속이 0.0m/s에서 0.6m/s로 증가 할 때에 유속 (v)에 따른 장력(R)의 실험식은 운동장 조상의 경우 R=$19.58v^{1.98}$($r^2$=0.98) 원통 조상인 경우, R=$26.90v^{1.72}$($r^2$=0.95)이었다. 2. 유속변화는 흐름이 망내부를 통과함에 따라 감소하여 운동장이 조상인 경우, 제1원통내부에서 0.1m/s일 때 약 70%, 0.2m/s일 때 60%, 0.3m/s일 때 약 50%, 0.4~0.6m/s에서는 약 40%정도로 초기유속에 비해 감소하였다. 원통이 조상측일 경우, 제2원통을 통과한 흐름은 초기 유속의 약 30~60%로 급격히 감소하였고, 제1원통에서는 약 20~30% 비탈그물에서는 약 10~20%정도 감소하였고, 운동장내에서 다시 유속이 증가하였다. 3. 운동장이 흐름의 조상측인 경우, 운동장그물의 기울기 변화량은 0~70$^{\circ}$까지, 비탈그물은 0~63$^{\circ}$까지 변화하였고, 조하측인 제2원통은 0~47$^{\circ}$까지 변화하였다. 유속이 증가함에 따른 까래그물의 깊이 변화는 초기 깊이에 보다 제1원통과 제2원통이 약 0~45%정도, 비탈그물이 약 0~37% 정도로 감소하였다. 4. 원통이 흐름의 조상측인 경우, 제2원통의 기울기 변화량은 약 0~70$^{\circ}$까지, 비탈그물은 약 0~55$^{\circ}$까지, 조하측인 운동장은 0~50$^{\circ}$까지 였다. 까래그물의 깊이 변화는 초기 깊이와 비교해서 제1원통은 약 0~35%, 제2원통은 약 0~20%, 비탈그물은 약 0~35%까지 감소하였으며, 유속이 0.5m/s이상에서 비탈그물이 원통 입구까지 부상하여, 원통 입구를 90%이상 막았다. 5. 어구의 변형을 최소화하고 전개용적을 증가시키기 위해서는 입구 및 운동장 부분에서는 힘출의 저조시 수심 위치에 중량추를 부착하고, 운동장 바깥쪽과 제1원통의 섶장과 까래그물 제2원통의 바깥쪽, 비탈그물의 까래에 부가 중량추를 부착하는 것이 필요할 것으로 판단된다.

• Tuberculosis and Respiratory Diseases
• /
• 제64권6호
• /
• pp.433-438
• /
• 2008

연구배경: COPD 환자에서 최대산소섭취량의 측정은 호흡재활치료에서 운동 강도의 결정과 치료 반응을 평가 하는데 사용된다. 하지만 운동부하 심폐기능 검사는 공간및 비용 등의 문제로 우리나라에서는 보편화되어 있지 않다. 한편 6분 보행검사는 간단하게 운동능력을 평가할 수 있는 방법으로 신뢰도가 높고 운동능력의 변화를 비교적잘 반영한다. 본 연구에서는 중등도 이상의 COPD 환자에서 $6M_{work}$을 이용해 최대산소섭취량을 예측하는 공식을 구하고자 하였다. 방 법: 중등도 이상의 COPD 남성 33명을 대상으로 전향적 다기관 연구를 진행하였다. 최초 방문시 폐기능검사, 운동부하 심폐기능 검사와 6분 보행검사를 실시하였고, 보행거리와 체중을 곱하여 $6M_{work}$을 구한 다음 최대산소섭취량과 상관관계가 높은 변수들을 찾아 다중회귀분석법을 이용하여 추정 예측식을 구하였다. 결 과: 환자의 평균 연령은 67.7세, 신체질량지수는 $22.5kg/m^2$였다. $FEV_1$의 평균값은 1.33 L (정상 예측치의 51.1%)이었고, 최대산소섭취량도 1,015.9 ml/min (정상 예측치의 50.8%)로 낮게 측정되었다. 평균 6분 보행거리는 516 m, $6M_{work}$는 32,811이었으며, $6M_{work}$가 6분 보행거리보다 최대산소섭취량과 더 높은 상관관계를 보였다. 또한 $FEV_1$, 폐확산능, FVC가 최대산소섭취량과 높은 상관관계를 보였다. 다중회귀분석으로 얻어진 예측식은 [최대산소섭취량(ml/min)=($274.306{\times}FEV_1$)+($36.242{\times}DLco$)+($0.007{\times}6M_{work}$)-84.867]이었다. 결 론: 최대산소섭취량 검사가 불가능한 상황에서의 대안으로 시행이 간편한 6분 보행검사를 보조적으로 이용할 수 있을 것으로 사료되며, 본 연구에서 얻어진 추정공식의 타당성에 대한 대규모 연구가 필요하다.

• The Korean Journal of Physiology
• /
• 제5권1호
• /
• pp.23-42
• /
• 1971

1. 인삼주정추출물이 흰쥐의 부신, 간, 비장 및 췌장의 핵산 함유량에 어떤 영향을 미치며, 인삼 투여를 받고 있는 동물이 스트레스(ACTH의 투여로 대신)를 받을 경우에 이들 장기 핵산 함유량에 어떠한 변동이 오는지를 알기 위하여 90마리의 흰쥐($150{\sim}200gm$) 수컷을 인삼군과 식염수군 및 정상군으로 나누고 이것을 각각 다시 둘로 쪼개어 인삼군, 인삼-ACTH군, 식염수군, 식염수-ACTH군, 정상군 및 정상-ACTH군의 여섯 작은 무리로 나누어 다음과 같은 실험을 하였다. 인삼군과 인삼-ACTH군에서는 몸무게 100gm에 대하여 인삼주정추출액(생리적 식염수 1ml속에 4mg의 인삼주정추출물이 포함된 용액)을 0.5ml의 비율로 매일 등뒤 피하에 5일동안 주사하였으며, 식염수군과 식염수-ACTH군에는 생리적 식염수를 몸무게 100gm에 대하여 0.5ml의 비율로 인삼군과 동일한 방법으로 주사하였다. 실험시작 제 5일째에 정상군과 식염수군 및 인삼군은 각각 전처치 없이 또는 인삼 혹은 식염수 주사후 2시간 만에 도살하고, 정상-ACTH군, 인삼-ACTH군 및 식염수-ACTH군은 각각 직접 또는 인삼이나 식염수를 투여한 다음 1시간 만에 ACTH를 주사하고, 그 시각부터 1시간후에 도살하여 부신, 간, 비장 및 췌장 조직의 핵산 함유량을 측정하였다. 이들 측정치를 지표로하여 인삼이 장기 핵산에 미치는 영향을 관찰한바 다음과 같은 결과를 얻었다. 1) 부신조직 RNA, DNA 및 RNA/DNA는 인삼군의 값이 정상군 및 식염수군의 그것보다 현저하게 많다. 인삼군의 값에 대한 인삼-ACTH군 값의 감소율은 정상군 및 식염수군에 대한 정상-ACTH군 및 식염수-ACTH군의 그것보다 현저하게 크다. 2) 간 조직의 RNA, DNA 및 RNA/DNA는 인삼군의 값이 정상군 및 식염수군의 값보다 현저하게 감소되었다. 인삼군 값에 대한 인삼-ACTH군 값의 감소율은 정상군 및 식염수군에 대한 정상-ACTH군 및 식염수-ACTH군의 그것 보다 적다. 3) 비장 조직의 RNA와 RNA/DNA는 인삼군의 값이 정상군의 그것 보다 현저하게 증가되며, 식염수군 보다는 감소된다. 인삼군의 DNA는 정상군에서 보다 감소되며, 식염수군의 그것 보다 증가된다. 인삼군 값에 대한 인삼-ACTH군 값의 감소율은 정상군에 대한 정상-ACTH군의 그것 보다 크며, 식염수군에 대한 식염수-ACTH군의 그것 보다는 작다. 4) 췌장 조직의 RNA와 DNA는 인삼군의 값이 정상군 및 식염수군의 그것 보다 현저하게 감소된다. 인삼군의 RNA/DNA는 정상군 및 식염수군의 그것 보다 증가된다. 인삼군에 대한 인삼-ACTH군의 RNA와 RNA/DNA 감소율은 정상군에 대한 정상-ACTH군의 그것 보다 적으나 식염수군에 대한 실염수-ACTH군의 그것 보다는 현저하게 크다. 인삼-ACTH군의 DNA는 인삼군의 그것 보다 증가되었으나, 정상-ACTH군 및 식염수-ACTH군의 DNA는 정상군 및 식염수군의 그것보다 감소되었다. 이상의 실험성적만으로 명확한 해석을 내리기는 어려우나 인삼은 장기의 RNA, DNA 및 RNA/DNA 비율에 현저한 영향을 미치는 것으로 보인다. 대체로 인삼은 부신의 RNA와 DNA 함유량 및 RNA/DNA 비율을 모두 증가시키나 다른 장기에서는 이들 값을 감소시키는 경향이 있다. 한편 인삼의 투여를 받은 동물에서는 ACTH투여후 조기에 부신 조직의 RNA, DNA 및 RNA/DNA의 감소율이 커지며, 간, 비장 및 췌장 조직의 RNA, DNA 및 RNA/DNA의 감소율은 적어지는 경향이 있다. 2. 인삼 및 ACTH의 투여에 의하여 부신, 췌장, 간 및 비장의 DNA와 RNA 함유량이 변동하는 모습을 화학적 방법으로 추적하여 얻은 전편의 성적을 형태학적 및 조직화학적 방법으로 입증할 목적으로 몸 무게 18~20gm의 마우스 수컷 40마리와 몸 무게 150~200gm의 흰쥐 수컷 20마리를 사용하여 각각 식염수군, 인삼군, 식염수-ACTH군 및 인삼-ACTH군의 4무리로 나누고 그중 마우스에서는 $^{3}H$-thymidine을 이용한 자기방사법을 써서 부신, 췌장, 비장 및 간등 4조직의 DNA 합성능을 비교 관찰하고, 흰쥐에서는 methylgreen pyronine 염색을 이용한 조직화학적 방법을 써서 위의 4조직의 RNA 함유량을 측정한 바 다음과 같은 결과를 얻었다. 1. 인삼 투여는 마우스의 부신피질과 비장 및 간의 표지 세포수를 식염수의 투여만을 받은 대조동물의 그것에 비하여 유의하게 증가시키나, 췌장에서 만은 오히려 표지 세포 수효를 감소시킨다. 그리고 인삼을 투여받은 흰쥐의 부신을 비롯하여 췌장, 비장 및 간 조직은 모두 methylgreen pyronine에 의하여 식염수군에서 보다 짙게 염색된다. 2. 식염수-ACTH군 및 인삼-ACTH군의 표지 세포수는 부신피질, 췌장, 비장 및 간 조직에서 모두 식염수군 및 인삼군에 비하여 감소되고, methylgreen pyronine으로 염색 할 경우에도 이들 조직은 식염수군 및 인삼군에 비하여 모두 묽게 염색된다. 3. 그러나 인삼-ACTH군의 표지 세포수는 부신피질, 비장, 췌장 및 간 조직에서 모두 식염수-ACTH군의 그것에 비하여 덜 감소되며, pyronine 염색에서도 4조직은 모두 식염수-ACTH군에서 보다 짙게 염색된다. 그러므로 인삼은 핵산 함유량에 현저한 영향을 미쳐 대체로 핵산의 생성을 촉진시키며, ACTH투여로 인하여 야기되는 조직 핵산 함유량의 감소를 어느 정도 억제한다.

• 한국작물학회지
• /
• 제3권
• /
• pp.1-40
• /
• 1965

본실험은 우리 나라 중부지방에 있어서의 수도의 재배 시기를 이동함에 따르는 실용제형질의 변화를 구명하기 위하여1958~'60년의 3개년에 걸쳐 농업시험장(현 작물시험장) 답작과(수원)에서 시행한 실험으로서 공시품종은 조만성, 초형 등 생태적특성을 달리하는 연산.수원 8002.오조.팔달 및 조광의 5품종을 공시하였으며, 파종기는 3월 2일 ~7월 10일까지를 10일 간격으로 14회에 걸쳐 파종하였고, 또 각 파종기마다 각각 못자리 일수를 30일, 40일, 50일, 60일, 70일 및 8일묘로 하여 이앙하여 실험하였다. 그 결과를 요약하면 다음과 같다. 1. 출수기 : 1) 파종기가 지연됨에 따라서 출수기도 거의 일직선으로 지연되나, 그 정도는 조생종에서 크고 만생종은 작으며, 또 못자리 일수가 길어짐에 따라서 커진다. 2) 출수까지의 일수는 각 품종 모두 파종기의 지연에 따라서 거의 일직선으로 단축하나, 품종에 따라 그 정도의 차이가 있어서 조생종은 단축일수가 작고 만생종이 크다. 그리고 동일품종 내에서도 못자리 일수가 길어짐에 따라 단축일수는 작아졌다. 또 최단축일수에 도달하는 시기도 조생종은 빠르나 만생종은 늦어진다. 또 못자리 일수가 긴 구에서 그 시기는 빨라진다. 품종 및 못자리 일수에 따라 차이가 있으나 어느 시기 이후의 파종기가 되면 단축을 나타내지 않게 되고, 다시 파종기가 늦어지면 한냉한 기후의 영향을 받아 출수일수는 오히려 연장된다. 3) 파종기(X)와 출수까지의 일수(Y)와의 회귀직선식 Y=a+bX의 계수 b(출수일수단축율)와 평균일수일수와는 고도의 상관이 인정되며, 평균출수일수가 클수록, 즉 만생종일수록 파종기의 지연에 의한 출수촉진일수가 컸었다. 4) 어느 품종의 파종기가 동일역일이면 못자리 일수가 극단으로 길지 않은 범위 내에서는(파종기의 지연에 따라서 출수까지의 일수가 직선적으로 단축되는 범위내에서의) 출수일수의 년차간의 변이는 크지 않으므로 목적하는 품종에 대한 수회의 파종기에 걸쳐 출수기의 변동을 조사하여 실험식(파종기와 출수까지의 일수와의 회귀직선식)을 구해 두면 임의의 재배시기에 있어서의 출수기를 추정할 수 있다. 5) 파종기가 3월하순~6월중순, 못자리 일수가 30~50일의 범위에서는 보통기재배에 있어서의 품종의 출수기의 조만을 가지고 그 전후에 해당하는 파종기에 있어서의 각각의 품종에 대한 출수기를 추정할 수 있다. 2. 성숙기 : 6) 출수기가 지연됨에 따라서 성숙한계 출수기의 범위 내에서는 성숙기도 거의 일직선으로 지연된다. 그 정도는 품종 및 못자리 일수의 장단에 의한 차이가 크다. 평균온도의 영향을 받는 범위 내에서는 출수기(X)가 지연됨에 따라서 성숙기간 중의 평균온도(Y)는 그것에 따라서 저하하며 품종간에 차이가 있으나, 전체적으로 보아 양자의 관계를 8월 1일부터 9월 13일까지의 범위에서는 Y=25.53-0.182X의 회귀직선식으로 나타낼 수 있다. 7) 품종의 조만생에 의한 성숙기간에 있어서의 평균온도의 차이가 심하며, 조생종은 최고 28$^{\circ}C$의 고온에서 경과하나 만생종은 22$^{\circ}C$에 불과하다. 8) 성숙기간중의 평균온도(X)와 성숙일수와의 관계는 극히 높은 상관이 인정되며, 양자의 관계를 Y=82.30-1.55X의 회귀직선식으로 표시할 수 있었다. 성숙기간중의 평균기온이 18~28$^{\circ}C$의 범위 내에서는 온도가 1$^{\circ}C$ 상승함에 따라서 성숙일수는 1.55일 단축되는 결과가 되며, 품종별로는 관산이 2.24일로서 단축정도가 컸고, 수원 8002가 0.78일로서 가장 적었다. 따라서 수원지방에 있어서는 평균온도가 18~28$^{\circ}C$의 범위에서는 온도가 상승함에 따라 성숙속도가 빨라진다고 할 수 있다. 9) 각 파종기별로 본 출수까지의 일수(X)에 대한 성숙기간중의 적산온도(Y)와의 관계는 거의 완전한 정의 상관관계가 있고, 성숙기간중의 적산온도는 어느 범위 내에 있어서의 파종기의 이동에 의한 차이는 비교적 작다. 3. 간장 및 수장 : 10) 품종간의 차이는 있으나 비교적 조파가 된 구간에는 간장에 큰 변화는 없으나 계속 파종기가 지연되어 만파가 되면 공시품종 모두 간장의 감소가 뚜렷해졌다. 또 간장의 감소정도는 약묘에서 완만할 뿐만 아니라, 5월 21일~6월 10일 파종과 같이 비교적 만파를 하더라도 별로 감소되지는 않으나, 80일묘와 같은 노숙묘인 때는 보통기재배에서도 급격히 감소한다. 11) 수장의 변화도 간장과 동일한 경향을 보이나 파종기의 지연에 의한 수장의 변화는 30~40일묘에서는 거의 인정되지 않았고, 못자리 일수가 길어지면 수장의 감소가 뚜렷해진다. 4. 수수 : 12) 파종기가 지연됨에 따라서 일정한 시기까지 계속수수는 감소하다가 어느 시기 이후가 되면 새로이 고차분얼의 다량발생으로 수수가 증가한다. 그 시기는 못자리 일수에 따라 차이가 있으며, 30~40 일묘는 5월 31일~6월 10일 파종기인 만파에서 수수가 최대로 감소하며, 70~80일묘의 경우 4월 11일~4월 21일의 파종기에서 이미 수수가 최대로 감소한다. 5. 지경수 : 13) 지경수는 파종기가 지연됨에 따라서 어느 일정한 시기까지는 변화가 없으나, 그 시기가 지나면 수당지경수의 감소가 현저하다. 14) 지경수가 감소되기 시작하는 시기도 30~40 일묘에서는 5월 3일 이후의 파종기가 되나, 80일묘의 경우 5월 31일 파종에서 이미 감소될 뿐만아니라, 5월 31일 파종이 되면 지경수가 3~4개에 불과하였다. 6. 비중과 천입중 : 15) 파종기의 이동에 따라 비중은 서서히 증가하나 어느 시기를 넘으면 급격히 증가하며, 이를 2개의 상이한 회귀직선으로 표시할 수 있다. 16) 이 양직선이 교차되는 지점을 성숙가능한계기로 보면 이 시기는 못자리 일수와 밀접한 관계가 있어서 30~40일묘는 6월 10일 반중기에 해당하나, 70~80일묘에서는 5월 1일로서 못자리 일수가 길어짐에 따라 성숙한계기는 당겨진다. 17) 천입중은 보통기재배에서 가장 무겁고 극조기재배를 하거나 만기재배에서 천입중은 저하한다. 7. 고중 및 완전정조중 : 18) 품종의 조만에 큰 영향없이 III~IV 파종기까지의 조기재배 하에서는 못자리 일수의 장단에 의한 고중의 큰 변이는 없으나, 파종기가 계속 이동하여 보통기재배가 되면 못자리 일수가 길어짐에 따라 차차 고종이 감소되어 오다가 만파가 되자 그 감소정도가 급격해졌다. 19) 파종기(X)와 정조수량(Y)과의 관계는 품종ㆍ못자리 일수를 종합하여 직선에 가까운 포물선으로 나타낼 수 있었다(Y=77.28-7.44X$_1$-1.001X$_2$). 따라서 조파시에는 정조수량의 변이가 작으나 어느 시기보다 파종기가 늦어짐에 따라서 정조수량은 감소하며, 그 정도는 만파인 경우에 심하고, 또 못자리 일수가 길어짐에 따라 더욱 현저하다. 20) 출수일수(X)에 대한 정조수량(Y)의 관계는 품종ㆍ못자리 일수를 구별하지 않고 보아다 회귀직선식으로써 나타낼 수 있었으나, 출수일수가 60~110일 정도까지는 조생종이 수량이 많고 만생종은 만기재배에 해당하므로 정조중의 감소가 심하였고, 출수일수가 140일 정도 이상이 되면 정조중이 거의 증가하지 않은 경향이 뚜렷하였다.

• 한국토양비료학회지
• /
• 제21권4호
• /
• pp.386-408
• /
• 1988

본(本) 연구(硏究)는 배추를 대상(對象)으로 1986년(年)부터 1986년(年)까지 6년간 Lysimeter시험(試驗)과 포장시험(圃場試驗)을 통하여 기상자료(氣象資料)로 부터 생육시기별(生育時期別) 증발산량(蒸發散量)과 수량(收量)을 추정(推定)하는 모형(模型)을 개발(開發)할 목적(目的)으로 실시(實施)하였다. Lysimeter 시험(試驗)에서는 잠재증발산량(潛在蒸發散量)과 최대증발산량(最大蒸發散量)을 측정(測定)하였고, 관개포장시험(灌漑圃場試驗)에서는 시기별(時期別) 토양수분(土壤水分)을 측정(測定)하여 실증발산량(實蒸發散量)을 계산(計算)하고 수량(收量)을 조사(調査)하였다. 시험(試驗)을 통(通)하여 얻어진 성적(成績)과 기상자료(氣象資料)의 상호관계(相互關係)를 다각적(多角的)으로 비교(比較)하여 증발산량(蒸發散量)과 수량추정모형(收量推定模型)을 설정(設定)하고 검정(檢定)한 결과(結果)는 다음과 같다. 1. 잠재증발산(潛在蒸發散)의 5년간(年間) 측정치(測定値)의 평균치(平均値)는 4월초순(月初旬) 2.38mm/day 에서 시일(時日)이 경과(經過)함에 따라 점점(漸漸) 증가(增加)되어 6월중순(月中旬)에 3.98로 최고치(最高値)를 보이고 다시 감소(減少)되어 11월중순(月中旬)에는 1.06으로 떨어졌다. 기존(旣存) 공식(公式)에 의한 잠재증발산추정치(潛在蒸發散推定値)는 실측치(實測値)에 비(比)하여 Penman법(法), Radiation법(法), Blaney-Criddle법(法)은 과다(過多)하게 추정(推定)되고, Pan evaporation법(法)은 과소(過少)하게 추정(推定)되는 경향을 보였다. 추정치(推定値)와 실측치간(實測値間)에는 전체적(全體的)으로 보아 고도(高度)의 유의(有意)한 상관(相關)이 있었으나, Blaney-Criddle법(法)은 7, 8월(月)에 상관(相關)이 없다는 것이 특이(特異)하였다. 2. 기상요인중(氣象要因中) 잠재증발산량실측치(潛在蒸發散量實測値)와 유의(有意)한 상관(相關)이 있는 것은 기온(氣溫), 대기포차(大氣飽差), 일조시수(日照時數), 일사량(日射量), Pan증발량(蒸發量)이었으며, 이들 요인(要因)을 고려(考慮)한 다중회귀식(多重回歸式)은 PET산정식(算定式)으로 활용(活用)이 가능(可能)하였다. 잠재증발산량(潛在蒸發散量) 추정모형(推定模型)으로서는 Pan 증발량(蒸發量)(Eo)을 사용(使用)한 회귀식(回歸式)이 가장 간편(簡便)하고 정확(正確)하였다. PET= 0.712 + 0.705 Eo 3. 잠재증발산량(潛在蒸發散量)에 대한 최대증발량(最大蒸發量)(ETm)의 비(比)로 정의(定義)된 작물계수(作物係數)(Kc)는 배추생육초기(生育初期)에 0.5~0.7 범위(範圍)이었으며, 생육중기(生育中期)부터는 0.9~1.2범위(範圍)로 유지(維持)되었다. 작물계수(作物係數)는 생육진도(生育進度)(G ; 0~1.0)의 2차함수(次函數)로부터 추정(推定)할 수 있었다. 봄배추 : $$Kc=0.598+0.959G-0.501G^2$$ 가을배추 : $$Kc=0.402+1.887G-1.432G^2$$ 4. 최대증발산량(最大蒸發散量)에 대(對)한 실증발산량(實蒸發散量)의 비(比)로 정의(定義)된 토양수분계수(土壤水分係數)(Kf)는 근권(根圈)의 유효수분률(有效水分率)(f)이 임계치(臨界値)(fp)이상(以上)에서는 1.0 수준(水準)으로 유지(維持)되다가 그 이하(以下) 에서는 f에 따라 직선적(直線的)으로 감소(減少)되었다. Kc와 f와의 관계(關係)에 있어서 fp와 직선함수(直線函數)의 기울기는 재배시기(栽培時期)와 PET에 따라 각각 다르게 나타났다. Kf=1.0, if $$f{\geq}fp$$ $$Kf=a+b{\cdot}f$$, if f＜fp 5. 층위별(層位別) 토양수분함량(土壤水分含量)으로부더 근권(根圈)의 물보유량변화(保有量變化)(${\Delta}S$) 계산(計算)에 있어서 모관수(毛管水)의 상승(上昇)과 배수량(排水量)은 무시(無視)할 정도(程度)로 적었다. 침투량(浸透量)(I)이 있을때 표토(表土) 5cm에 보유(保有)되었다가 증발(蒸發)되어 버리는 물량(量)(Es)은 실증발산(實蒸發散) 추정한형(推定漢型)에서 별도로 고여(考濾)되어야 하며, Es는 근권(根圈)의 유효수분율(有效水分率)로부터 추정(推定)된 표사(表士) 5cm에서 증발가능(蒸發可能)한 최대(最大) 물량(Esm)과 I을 비교(比較)하여 결정(決定)할 수 있었다. Es = I if I < Esm Es = Esm if < Esm 380 6. 실증발산최(實蒸發散最)(ETa) 추정모형(推定模型)은 물수지식(收支式)에 근거(根據)하여, 모관수(毛管水)의 상하이동양(上下移動量)은 무시(無視)하고 잠재증발산양(潛在蒸發散量)(PET), Kc, Kf, Es를 고려(考慮)하여 아래식(式)으로 설정(設定)되었다. $$ETa=PET{\cdot}Kc{\cdot}Kf+Es$$ 7.배추의 상대수양(相對收量)(Y/Ym) 추정모형(推定模型)은 재배기간중(栽培期間中)의 ETa의 대수함수(對數函數)의 형태(形態)로 설정(設定)되었다. $$Y/Ym=a+b{\cdot}{\ell}n(ETa)$$ 봄배추 : a=0.07, b =0.73 가을배추 : a=0.37, b =0.66 8. 설정(設定)된 모형(模型)에 의해 추정(推定)된 실증발산양(實蒸發散量)과 상대수양(相對收量)을 실측치(實測値)와 비교(比較)하여 본 결과(結果), 실증발산추정치(實蒸發散推定値)의 평균편차(平均偏差)는 봄배추에서는 0.29mm/day, 가을배추에서는 0.19mm/day이었으며, 상대수양추정치(相對收量推定値)의 평균편차(平均偏差)는 봄배추에서는 0.14, 가을배추에서는 0.09이었다. 9. 모형설정(模型設定)이 완료(完了)된 이후(以後) 별도(別途)로 3작기(作期)에 대(對)한 실측치(實測値)와 추정치간(推定値間)의 편차(偏差)도 모형설정기간(模型設定期間)의 것보다 오히려 더 적게 나오는 경향(傾向)을 보였다. 따라서 본추정모형(本推定模型)은 실제(實際) 활용가치(活用價値)가 있다고 판단(判斷)된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Tuberculosis and Respiratory Diseases
• /
• 제42권3호
• /
• pp.277-294
• /
• 1995

연구 배경: 우리나라에서 과거 30년 동안 결핵 유병률은 현저히 감소되어 왔으나 비결핵항산균에 의한 질병의 발생빈도는 아직 정확하게 알려져 있지 않다. 대한결핵 및 호흡기학회는 전국 실태조사를 통하여 현재까지 확인된 전국의 비결핵항산균증 발생 현황을 파악하고 이를 분석하여 외국의 보고와 비교함으로써 일반 개업의 및 내과 전문의의 진료 활동에 도움이 되도록 하고자 본 사업을 시행하였다. 방법: 조사와 분석은 1981년 1월부터 1994년 10월까지 대한결핵협회 결핵연구원에 의뢰된 검체중 비결핵항산균의 종(species)이 확인된 158예를 대상으로 검사를 의뢰한 병원의 진료의에게 증례 기록지를 보내어 정확한 임상 및 검사 정보를 기록하여 회신 하도록하는 후향적 조사 방법으로 그 결과를 수집 분석하였다. 결과: 1) 연도별로 보면 1981년에 1예, 1982년 2예 등으로 1990년 이전에는 매년 10예 미만 이던 것이 1991년에 14예, 1992년 10예, 1993년 4예, 1994년에는 96예로 1990년 이후가 전체의 84.2%를 차지하였다. 2) 연령은 10대 1예, 20대 6예, 30대 15예, 40대 19예, 50대 27예, 60대 51예, 70세 이상 39예로 60세 이상이 전체의 57%를 차지하였다 성별 분포는 남자 114예(72.1%), 여자 44예(27.9%) 이었다. 3) 병원별 분포는 복십자의원 61예(38.6%), 보건소 42예(26.6%), 3차기관 21예(13.3%), 2차기관 15예(9.5%), 1차기관 10예(6.3%) 이었으며, 지역별 분포는 서울 98예(62%), 경상북도 17예(10.8%), 경기도 12예(7.6%), 충청남도 8예(5.1%), 경상남도와 충청북도 각각 5예(3.2%), 기타 지역이 6예(3.8%) 이었다. 4) 선행 폐 질환은 폐결핵 113예(71.5%), 기관지확장증 6예(3.8%), 만성 기관지염 10예(6.3%), 폐섬유증 6예(3.8%) 등이었다. 폐결핵의 발병 시기는 1년 이내가 7예(6.2%), 2~5년전 32 예(28.3%), 6~10년전 29예(25.7% ) 등으로 2~10년전이 전체의 54%를 차지하였다. 폐결핵의 치료 기간은 3개월 이내가 6예로 5.3%이었으며, 4~6개월이 17예(15%), 7~9개월 16예(14.2%), 10~12 개월 11예(9.7%), 1~2년 21예(18.6%), 2년 이상 8예로 7.1% 이었다. 폐결핵의 치료 결과는 완치가 44예(38.9%), 치료 설패가 25예(22.1%) 이었다. 5) 동반된 폐외질환은 만성 간질환과 만성 산부전이 함께 있었던 경우 각각 1예를 포함하여 당뇨병이 9예(5.7%)에서 있었으며, 심혈관계질환 2예(1.3%), 장기간 스테로이드를 투여 받은 경우 2예(1.3%) 그리고 만성 간질환, 만성 신부전, 대장염 및 진폐증이 각 1예(0.6%)씩 있었다. 6) 비결핵항산균증이 발현한 임상상은 만성 폐 감염증 86예(54.4%), 경부 및 기타 임파선염 1예(0.6%), 기관지 결핵 3예(1.9%), 장결핵 1예(0.6%) 이었다. 7) 임상 소견은 기침 62%, 객담 61.4%, 호흡곤란 30.4%, 객혈 및 혈담 20.9%, 체중 감소 l3.3%, 발열 6.3%, 기타 4.4% 등 이었다. 8) 흉부 X-선 소견은 정상 7예(4.4%), 경증 20예(12.7%), 중등증 67예(42.4%), 중증 47예(29.8%)이었으며, 공동은 43예(27.2%)에서 동반되었고, 흉막염은 18예(11.4%)에서 동반되었다. 9) 비결핵항산균이 확언된 검사물은 객담 143예(90.5%), 객담 및 기관지세척액 4예(2.5%), 기관지세척액 1예(0.6%) 이었다. 동정된 비결핵항산균의 종류는 M. avium-intracellulare가 104예로 전체의 65.2%를 차지하였고 M. fortuitum 20예(12.7%), M. chelonae 15예(9.5%), M. gordonae 7예(4.4%), M. terrae 5예(3.2%), M. scrofulaceum 3예(1.9%), M. kansasii와 M. szulgai가 각각 2예(1.3%), 그리고 M. avium-intracellulare와 M. terrae가 동시에 확인된 경우가 1예(0.6%) 이었다. 10) 도말 및 배양 검사 결과는 4번의 검사 중 도말 음성, 배양 양성인 경우는 첫번째 검사상 59예로 37.3%이었고, 두번째 검사에서는 22.8%, 세번째 검사에서는 15.2%, 네번째 검사에서는 14.6% 이었으며, 도말 양성, 배양 양성인 경우는 첫번째 검사상 48예로 30.4% 이었고, 두번째와 세번째 검사에서는 각각 34예(21.5%), 네번째 검사에서는 22예(13.9%)이었다. 이상의 배양 검사 결과를 종합하면 4번 검사한 것 중에서 4회 모두 배양 양성으로 확인된 경우가 21예(13.3%)이었고 3회 배양 양성은 37예(23.4%), 2회 배양 양성은 38예(24.1%)로 2번 이상 배양 양성으로 확인된 경우는 총 96예(60.8%) 이었다. 11) 모든 비결핵항산균에 대한 약제 내성률은 INH 62%, EMB 55.7%, RMP 52.5%, PZA 34.8%, OFX 29.1%, SM 36.7%, KM 27.2%, TUM 24.1%, CS 23.4%, TH 34.2%, PAS 44.9% 이었다. M. avium intracellulare에 대한 내성률은 INH 62.5%, EMB 59.6%, RMP 51.9%, PZA 29.8%, OFX 33.7%, SM 30.8%, KM 20.2%, TUM 17.3%, CS 14.4%, TH 31.7%, PAS 38.5%이었다. M. chelonae에 대한 내성률은 INH 66.7%, EMB 66.7%, RMP 66.7%, PZA 40%, OFX 26.7%, SM 66.7%, KM 53.3%, TUM 53.3%, CS 60%, TH 53.3%, PAS 66.7% 이었다. M. fortuitum 에 대한 내성률은 INH 65%, EMB 55%, RMP 65%, PZA 50%, OFX 25%, SM 55%, KM 45%, TUM 55%, CS 65%, TH 45%, PAS 60% 이었다. 12) 비결핵항산균증의 치료는 129예(81.7%)에서 시행하였으며, 1차 치료 처방 중 INH와 RMP을 포함하는 복합 처방은 86예(66.7%) 이었고, INH 혹은 RMP 중 한가지만을 포함하는 처방은 30예(23.3%), INH와 RMP이 포함되지 않은 처방은 9예(7%)에서 있었다. 2차 치료를 시행한 65예의 처방은 2제 이하 2예(3.1%), 3제 15예(23.1%), 4제 20예(30.8%), 5제 9예(13.8%), 6제이상 19예(29.2%) 이었다. 치료 후 경과는 36예(27.9%)에서 호전, 65예(50.4%)에서 변화 없었으며, 4예(3.1%)에서 악화 4예(3.1%)에서 사망하였다. 호전된 경우 34예(94.4%)에서 균 음전이 확인되었으며, 균 음전 시기는 1개월 이내 2예(5.9%), 3개월 이내 11예(32.4%), 6개월 이내 14예(41.2%), 1년 이내 2예(5.9%), 1년 이상 1예(2.9%) 등 이었다. 결론: 비결핵항산균증 전국실태조사 결과 아직 우리나라에서 확인된 비결핵항산균 감염 예가 많지 않으나 1990년 이후 비결핵항산균증이 현저히 증가하는 경향이었으므로 앞으로 이에 대한 임상의들의 관심이 더욱 필요하리라 생각된다.