• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.37-42
• /
• 1989

Management of Swimming pool is focused on Swimming pool samitation in relation with chlorination of swimming water and potable water, disposal of waste and excrement within the boundry of swimming pool that may be summerised as follows: 1. Chlorination of Swimming Water Residual chlorine must be kept within the range of $0.4\~0.6 mg/l$ and in case of chloramine should be $0.7\~1.0mg/l$ while swimming pool is in operation 2. Chlorination of potable Water Residual chlorine must be kept within the rangs of $0.2\~04 mg/l$ at all time 3. Disposal of litters must be kept in the water tight waste bin with fitted lid, and waste should not be overflow -out of the bin. When waste in landfilled, the sufficient amount of cover material should be used daily. 4. Disposal of excrement Toilet must be water-flush type. However, The establishment of pit latrine is unavoidable the excrement must be covered with lime or dirt so that excrement should not be exposed to air.

• International Commerce and Information Review
• /
• v.3 no.1
• /
• pp.177-196
• /
• 2001

The advancement of information technology provides a wide range of options for the corporate to cope with new business environments. As with most other businesses, the utilization of the logistics information technology can be an instrument to enhance the competitiveness of the company. Therefore it is essential to analyze how companies utilize and verify the relationship between company business performance and the level of information technology utilization, which is the objective of this paper. The questionnaire was sent to 300 companies listed on the stock market at random The author received 176 responses of which 142 were complete and valid. According to the analysis of questionnaires, the adoption level of information technologies was dependent on the perception of top managers on the importance of information technology in business competitiveness. Furthermore the level of relation between the information technology adoption and business performance was significant. Therefore businesses need to increase the utilization of information technologies, such as establishment of logistics information system, network with other business partners in order to business logistics performance.

• Journal of Agricultural Extension & Community Development
• /
• v.16 no.1
• /
• pp.21-49
• /
• 2009

There is a wide range of agreement for reorganization of administrative units. It is expected that regionalization of city governments and city-county consolidation would contribute to enhance efficiency of extension services and weaken citizen accessibility, responsiveness, and participation. Therefore, it is suggested that branch office of extension center should be provided to the isolated rural areas in order to maintain the appropriate level of services. Also, the relationship and linkage between the national/regional government and local extension centers should be reshaped by making current linkage system such as monthly Provincial Meeting and central-local association more effective. Establishment of agricultural database of each local region is needed to strengthen local extension center's role. Finally, extension service agency needs to consider to expand its function from the traditional extension services to a variety of 'rural issues.'

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.68.6-68
• /
• 2001

There is a looper for the safety threading between stands in finishing mill. In this looper system, it is 2 inputs 2 outputs MIMO )Multi Input Multi Output) system, which has two inputs that are the angle of looper and the tension of Strip and has two outputs that are the torque of looper motor and the speed of Mill Motor. In tension controller of looper, it calculates the range of tension variation into the compensation value of speed and outputs to the speed controller of Mill Motor, so that it controls the tension of strip between stands. In this study, using this tension controller of looper, we adjust the establishment value of ...

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.150-155
• /
• 2011

It is a wide range of types of building materials. Depending on the flow of time for the increased interest in building appearance of quality new and different materials are being developed. In particular, the case of granite widely used as cladding, recently, China's low-cost stone disguised as a large number of local granite stone as the domestic industry has been a big hit. Therefore, the purpose of study is establishment of the database for granite building exterior materials. For that, the domestic granite and chinese granite are selected. The spectrums of these material are investigated and analyzed.

• Journal of Surface Science and Engineering
• /
• v.32 no.3
• /
• pp.456-460
• /
• 1999

Transparent conducting tin (IV) oxide thin films have been studies and developed for the electrode materials of solar cell substrate. Fabrication of tin oxide thin films by sol-gel method is process development of lower cost photovoltaic solar cell system. The research is focused on the establishment of process condition and development of precursor. The precursor solution was made of tin isopropoxide dissolved in isopropyl alcohol. The hydrolysis rate was controlled by addition of triethanolamine. Dip and spin coating technique were applied to coat tin oxide on borosilicate glass. The resistivity of the thin film was lower than 0.1Ω-cm and the transmittance is higher than 90% in a visible range.

• Korean Journal of Hydrosciences
• /
• v.6
• /
• pp.1-11
• /
• 1995

A plunge pool is often employed as an energy-dissipating device at the end of a spillway or a pipe culvert. A jet from spillways or pipes frequently generates a scour hole which threaten the stability of the hydraulic structure. Existing scour prediction formulas of plunge pool of spillways or pipe culverts give a wide range of scour depths, and it is, therefore, difficult to accurately predict those scour depths. In this study, a new experimental method and new sour prediction formulas under submerged circular jet for large bed materials with shallow tailwater depths were developed. A major variable, which was not used in previous scour prediction equations, was the ratio of jet size to bed material size. In this study, jet momentum acting on a bed particle and jet diffustion theory were employed to derive scour prediction formulas. Four theoretical formulas were suggested for the two regions of jet diffusion, i.e., the region of flow establishment and the region of established flow. The semi-theoretically developed scour prediction formulas showed close agreement with laboratory experiments performed on movable bed made of large spherical particles.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1661-1677
• /
• 2006

Rhizobium and related genera are soil bacteria with great metabolic plasticity. These microorganisms survive in many different environments and are capable of eliciting the formation of nitrogen-fixing nodules on legumes. The successful establishment of symbiosis is precisely regulated and requires a series of signal exchanges between the two partners. Quorum sensing (QS) is a prevalent form of population density-dependent gene regulation. Recently, increasing evidence indicates that rhizobial quorum sensing provides a pervasive regulatory network, which plays a more generalized role in the physiological activity of free-living rhizobia, as well as during symbiosis. Several rhizobia utilize multiple, overlapping quorum sensing systems to regulate diverse properties, including conjugal transfer and copy number control of plasmids, exopolysaccharide biosynthesis, rhizosphere-related functions, and cell growth. Genomic and proteomic analyses have begun to reveal the wide range of functions under quorum-sensing control.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.141-154
• /
• 2001

This paper presents a fundamental study to establish a standardization system of the Construction Continuous Acquisition and Life-cycle Support(CALS). States of standardization in the Construction CALS were reviewed to find some defects in developing CALS system in construction industry. It is analyzed that three of major parts were needed to put up a standardization system for the Construction CALS. Firstly, the range of Construction CALS standardization is set up by identifying of Construction CALS and defining the standard and standardization. Secondly, the strategy to enable more effective implementation of Construction CALS standardization and the relationship of the concerned system presented can be used for establishing the Construction CALS standardization system. In addition, the spread and application device is proposed for using Construction CALS standards at public institutions and construction related companies. Conclusively, a classification system of the Construction CALS standards was proposed and some objects to be standardized were presented in the classification system. What were studied in this paper will provide the primary information and guidance to develop a guideline for standardization of the Construction CALS.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2018

It is very important to classify explosion hazardous area in order to prevent an accident explosion. In order to prevent such a explosion, the Industrial Safety and Health Standards Rules stipulates the establishment and management of explosion hazards in accordance with the criteria set by the Korean Industrial Standards. This study has investigated the range of the explosion hazardous area according to various hole sizes, pressures, vapor densities, and wind velocities in the outdoor flammable liquid tank using KS C IEC-60079-10-1 $2^{nd}$ Ed.(=IEC CODE) and PHAST. The results show that the explosion hazardous areas by IEC CODE have circle shapes. However, the areas by PHAST show ellipse shapes. The different of the explosion hazardous areas increases with the increase of wind velocity.