• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.15-18
• /
• 2000

Transparent conducting tin (IV) oxide thin films have been studied and developed for the electrode materials of solar cell substrate. Fabrication of tin oxide thin films by sol-gel method is process development of lower cost photovoltaic solar cell system. The research is focused on the establishment of process conditions and development of precursor. The precursor solution was made of tin isopropoxide dissolved in isopropyl alcohol. The hydrolysis rate was controlled by addition of triethanolamine. Dip and spin coating technique were applied to coat tin oxide on borosilicate glass. The resistivity of the thin film was lower than 0.01-cm and the transmittance is higher than $90\%$ in a visible range.

• Animal Bioscience
• /
• v.35 no.1
• /
• pp.147-152
• /
• 2022

Objective: This study was conducted to obtain an objective index that can be quantified and used for establishing an animal welfare certification standard in Korea. For this purpose rumen pH, ruminating time, milk yield, milk quality, and blood components of cows reared in farms feeding high forage level (90%) and farms feeding low forage level (40%) were compared. Methods: Data on rumen pH, rumination time, milk yield, milk fat ratio, milk protein ratio, and blood metabolism were collected from 12 heads from a welfare farm (forage rate 88.5%) and 13 heads from a conventional farm (forage rate 34.5%) for three days in October 2019. Results: The rumination time was longer in cattle on the welfare farm than on the conventional farm (p<0.01), but ruminal pH fluctuation was greater in the cattle on conventional farm than the welfare farm (p<0.01). Conventional farms with a high ratio of concentrated feed were higher in average daily milk yield than welfare farms, but milk fat and milk production efficiency (milk fat and milk protein corrected milk/total digestible nutrients) was higher in cattle on welfare farms. Blood test results showed a normal range for both farm types, but concentrations of total cholesterol and non-esterified fatty acid were significantly higher in cows from conventional farms with a high milk yield (p<0.01). Conclusion: The results of this study confirmed that cows on the animal welfare farm with a high percentage of grass feed had higher milk production efficiency with healthier rumen pH and blood metabolism parameters compared to those on the conventional farm.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.359-365
• /
• 2013

BACKGROUND: Methane ($CH_4$) emission is calculated using the default $CH_4$ emission factor as recommended by the International Panel on Climate Change(IPCC guidelines). However, the default emission factor has been derived using including the data from other countries having different soil and environmental conditions and may not reflect the real $CH_4$ emission rates in Korea. The objective of this study was to estimate the baseline emission factor of $CH_4$ in Korean paddy soils during rice cultivation. METHODS AND RESULTS: Methane emission patterns were characterized in four different paddy soils across country for a consecutive 3 years during the rice cultivation period. Rice plants were cultivated under continuous flooding and fertilized using the recommended chemical fertilization in Korea ($N-P_2O_5-K_2O$=90-45-57kg/ha). The mean $CH_4$ emission rate was 2.32 kg $CH_4$/ha/day and the uncertainty of the investigated data was 21.7%, with a valuable error range at 1.82-2.82 kg $CH_4$/ha/day with a 95% confidence interval. CONCLUSION(S): Conclusively, the Korean paddy soils' baseline emission factor of $CH_4$ is approximately 2.32 kg $CH_4$/ha/day and can be used to estimate the $CH_4$ emissions more exactly.

• Korean Journal of Veterinary Research
• /
• v.52 no.1
• /
• pp.19-24
• /
• 2012

This paper describes the epidemiological characteristics of bovine brucellosis in Korea during January 2000~September 2004, which encompasses the period when the incidence of bovine brucellosis increased abruptly. Data from the National Animal Infectious Disease Data Management System were used for this study. A range of epidemiological measures was calculated including annual herd and animal incidence. During the study period, there were 1,183 outbreaks on 638 farms. In beef cattle, annual herd incidence increased from 0.2 (2000) to 11.5 (2004, to September) outbreaks per 10,000 and annual animal incidence varied between 3.4 (2000) and 105.8 (2004, to September) per 100,000, respectively. On 401 (62.9%) infected farms during this period, infection was eradicated without recurrence. Recurrence of infection was significantly higher on farms where abortion was reported (53.3%), compared to farms where it was not (30.0%). On beef cattle farms, infection was introduced most frequently through purchased cattle (46.2%). Based on the results of this study, the establishment and spread of brucellosis in the Korean beef cattle population were mainly due to incomplete or inappropriate treatment of aborted materials and the movement of infected cattle.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.298-305
• /
• 2011

The purpose of this dissertation is finding the meaning and form of Euthanasia, Considering by Criminal law that the core of the debate over the 'pros and cons' of euthanasia, And seeking measures about needs of currently Euthanasia legislation and institutional establishment. Through the remarkable progress, today's medical science makes to cure the Incurable patients, and artificially prolong human life by life-support system. These changes of Healthcare Environments extending a permissible range of Euthanasia over the series of criminal discussions about Euthanasia. And medical treatment has been discussed from negative side to positive side. So, In the current legal system, seeking for realistic measure is demands of the times behind the penally and ethical problems. Therefore, I will study the needs of legal system and reestablish values about Respect for Human Life.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.4
• /
• pp.1-20
• /
• 2017

The most important identity of public library is local public goods that guarantee access and use of knowledge and information of local residents. To justify this, the library must create an optimal lighting environment. Particularly, since the perception rate of information through vision is over 80%, it is necessary to secure proper illuminance. This study measured the illuminance level of public libraries in Daegu. Based on the results, this study suggested a desirable illuminance level for each space and proposed plans to secure and maintain proper illuminance(prospective revision of the KS A 3011, setting the illuminance range for each space of the local government, replacing the existing lighting fixtures with LED, enhance supervision of lighting management, establishment of basic principles for proper lighting and detailed plans for each space of the library, investigation and reflection on users' complaints and satisfaction, etc.)

• Journal of architectural history
• /
• v.23 no.1
• /
• pp.7-19
• /
• 2014

This study considers the proper repair techniques by examining the most representative repair cases of the Korean arch bridges and proposes the constructional manual which can apply similar occasions. The cases are Seonamsa Seungseongyo and Songgwangsa Geukrockgyo where this researcher had taken part in the repair works. This Study proposes the maintenance construction manual about the performance degradation drew by performance degradation of the both Korean arch bridges in the maintenance process. First, arch bridge maintenance should be carried out in the dry season, when water is impermeable in the bottom surface of the bridge. Moreover, risk factors of the maintenance should be excluded to secure the water vally flow, the bypass and the temporary bridge. Second, prior to repair, it has to precede (1)3D shooting (2)formal examination (3)structure safety test (4)geological and lithic surveys (5)arch curvature establishment and makeshift frame settlement before transformation (6)relationship expert comments. Third, if the baduk and the foundation stones are inevitable to replace due to performance degradation on the foundation, it should use the high quality stones and secure greater stress by extending the standard range. The foundation on irregular rock needs to be flattened and underside on the replaced materials require Grengyijil to deliver the equal loads. Fourth, In the process of dismantling the stones of the arched bridge, it could make heavy weathering degree and not reuse the materials. Charge should converge the expert advices to choose the reuseable, the conservate and the alternative materials, and increase the reutilization of the raw materials by preservation and reinforcement treatments. Fifth, the side wall should be repaired by the rubble work technique which is not able to pile compost satiety, so it must use long depth of masonary stones for reinforcement. It is considered to reinforce the stone wall in shore as much as possible and protect the abutment and the side wall on the upstream for the arch bridge maintenance works.

• Fourth Industrial Review
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2021

Purpose - This case study analyzes the internationalization strategy and innovation strategy as key factors contributing to the business success of CAP, a small and medium-sized manufacturing company in Korea producing auto parts such as wipers. This study describes the diversification strategies conducted by CAP Corporation and highlights the company's core competencies that have largely contributed to their global competitive success. Research design, data, and methodology - This paper provides in-depth case study on how CAP was able to grow into a hidden champion company, focusing on their strategies since its establishment. In particular, by analyzing the success factors centering on CAP's aggressive innovation strategy and internationalization strategy, it presents guidelines for small and medium-sized enterprises in Asian countries to become a Hidden Champion company. Result - CAP's product technology has successfully established innovative system on their product called 'vertebra spring' to distribute uniform pressure to the rubber to ensure performance as well as durability of their products. In order to continue benefiting from utilizing core competence and to continue pursuing technological advancement in the wiper industry, CAP has launched a wide range of products (flat blade, conventional blade, hybrid blade) applicable to 95% of the vehicle in the market. Conclusion - Taken together, CAP has many aspects of a hidden champion company by investing in R&D up to 8% of its annual sales to R&D investment even during the crises situation. This number is about 3.36 times higher than the average ratio of listed companies in Korea. Furthermore, the leadership of the management team as well as their vision toward the global market and strong commitment to innovation enabled CAP to become the world's fifth-largest wiper and Asia's No. 1 wiper manufacturer.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.11-14
• /
• 2000

Transparent conducting ITO thin films have been studied and developed for the solar cell substrate or LCD substrate. ITO thin film has been mostly fabricated by high cost sputtering method. In this research, sol-gel method is applied to fabricate ITO thin film at lower cost. The research is focused on the establishment of process condition and development of precursor. Organic sol was made of indium tri-isopropoxide dissolved in ethylene glycol monoethyl ether. The hydrolysis was controled by addition of acetyl acetone. Tin(IV) chloride was added as dopant. Inorganic sol was made of indium acetate dissolve din normal propanol. Spin coating technique was applied to coat ITO on borosilicate glass. The resistivity of ITO thin film was approximately $0.01\Omega{\cdot}cm$ and the transmittance is higher than $90\%$ in a visible range.

• Water for future
• /
• v.27 no.1
• /
• pp.123-131
• /
• 1994

A plunge pool is often employed as an energy-dissipating device at the end of a spillway or a pipe culvert. A jet from spillways or pipes frequently generates a scour hole which threatens the stability of the hydraulic structure. Existing scour prediction formulas of plunge pool of spillways or pipe culverts give a wide range of scour depths, and it is, therefore, difficult to accurately predict those scour depths. In this study, a new experimental method and new scour prediction formulas under submerged circular jet for large bed materials with shallow tailwater depths were developed. A major variale, which was not used in previous scour prediction equations, was the ratio of jet size to bed material size. In this study, jet momentum acting on a bed particle and jet diffustion theory were employed to derive scour prediction formulas. Four theoretical formulas were suggested for the two regions of jet diffusion, i.e., the region of flow establishment and the region of established flow. The semi-theoretically developed scour prediction formulas showed close agreement with laboratory experiments performed on a movable bed made of large spherical particles.