• Journal of the Korean association of regional geographers
• /
• v.6 no.1
• /
• pp.1-28
• /
• 2000

The purpose of this study is to clarify the suburbanization of manufacturing, and location and linkages of decentralized manufacturing from Metropolitan Pusan by means of case study on manufacturing location and linkages in the suburb of Metropolitan Pusan. Kimhae city and Yangsan-Gun toward which heavy decentralization of manufacturing from the Metropolitan Pusan has been done. Both hard data and soft data were used as the basic data. Hard data are the statistical data in statistical yearbooks and firm list in directories. The former consists of the number of establishments and employees classified by product type, firm size and unit area. The latter consists of owner's names, addresses, employee number, products and headquarters of firms. Soft data are the results of the interviews with the 242 owners of firms in the four case study areas selected by Proportional Stratified Sampling Method. The major findings are as follows: 1. The spatial variations of manufacturing in the suburb was regularized in the latter half of 1970's. The primary processes to decentralize manufacturing from Metropolitan Pusan were the birth, relocation and establishment of branches of the firms. Among them the relocation of small outer-oriented single-location firms from Pusan was the most important. 2. The spatial variations undergoing spatial expansion of manufacturing distribution and increase of agglomeration degree of manufacturing, proceeded from the adjacents of Metropolitan Pusan to the outer areas along the main transportation route. 3. The main factors which caused manufacturing to decentralize from the Metropolitan Pusan were firm policy and land for this policy. The main locational factors which induced the decentralizing manufacturing into the suburb were land, market and transportation. 4. The strength of linkages with the outside of the study area is stronger than that of linkages with the inside. There is distance-decay-function in the strength of linkages with the outside, and linkages with short distant areas are stronger than those with long distant areas. 5. The ranges of spatial linkages in procurement of materials, in subcontraction and in marketing are wider than those in ordering. 6. The main factors which cause the formation of linkages are different by types of linkages: monopolistic and oligopolistic supply are important in procurement linkages; characteristics of products and the subsequent marketing difficulties, in subcontraction linkages; fluctuation, cost reduction, insufficient facility and characteristics of products, in ordering linkages; subcontract, characteristics of product and the subsequent marketing difficulties, in marketing linkages. 7. The changes of linkages owing to locational changes of firms were great, and were greater in long distant areas than in short distant areas. 8. The main factor influencing on the changes of linkages was the easiness in the transportation of goods, movement of labour and contacts with customers. In conclusion, some facts described above were proved to be consistent with the results of proceeding studies in the other areas: influence of relocation of decentralizing firms on the suburbanization; the factors of manufacturing decentralization; spatial characteristics of linkages; linkage changes owing to relocation of firms. Some were proved to be partly consistent: locational factors inducing decentralized manufacturing into the suburb were proved to be inconsistent. I think that the results of previous studies on the other areas can be applicable to the explanation on the decentralization of Metropolitan manufacturing from the viewpoint of the suburb. For the better explanation on the decentralization of Metropolitan manufacturing, more empirical case studies on the suburbanization of manufacturing are necessary.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.151-171
• /
• 2015

This study examined the concepts of the Internet of Things(IoT), the major issue and IoT trend in the domestic and international market. also reviewed the advent of IoT era which caused a 'Paradigm Shift'. This study proposed a solution for the appropriate corresponding strategy in terms of Enterprise. Global competition began in the IoT market. So, Businesses to be competitive and responsive, the government's efforts, as well as the efforts of companies themselves is needed. In particular, in order to cope with the dynamic environment appropriately, faster and more efficient strategy is required. In other words, proposed a management strategy that can respond the IoT competitive era on tipping point through the vision of paradigm shift. We forecasted and proposed the emergence of paradigm shift through a comparative analysis of past management paradigm and IoT management paradigm as follow; I) Knowledge & learning oriented management, II) Technology & innovation oriented management, III) Demand driven management, IV) Global collaboration management. The Knowledge & learning oriented management paradigm is expected to be a new management paradigm due to the development of IT technology development and information processing technology. In addition to the rapid development such as IT infrastructure and processing of data, storage, knowledge sharing and learning has become more important. Currently Hardware-oriented management paradigm will be changed to the software-oriented paradigm. In particular, the software and platform market is a key component of the IoT ecosystem, has been estimated to be led by Technology & innovation oriented management. In 2011, Gartner announced the concept of "Demand-Driven Value Networks(DDVN)", DDVN emphasizes value of the whole of the network. Therefore, Demand driven management paradigm is creating demand for advanced process, not the process corresponding to the demand simply. Global collaboration management paradigm create the value creation through the fusion between technology, between countries, between industries. In particular, cooperation between enterprises that has financial resources and brand power and venture companies with creative ideas and technical will generate positive synergies. Through this, The large enterprises and small companies that can be win-win environment would be built. Cope with the a paradigm shift and to establish a management strategy of Enterprise process, this study utilized the 'RTE cyclone model' which proposed by Gartner. RTE concept consists of three stages, Lead, Operate, Manage. The Lead stage is utilizing capital to strengthen the business competitiveness. This stages has the goal of linking to external stimuli strategy development, also Execute the business strategy of the company for capital and investment activities and environmental changes. Manege stage is to respond appropriately to threats and internalize the goals of the enterprise. Operate stage proceeds to action for increasing the efficiency of the services across the enterprise, also achieve the integration and simplification of the process, with real-time data capture. RTE(Real Time Enterprise) concept has the value for practical use with the management strategy. Appropriately applied in this study, we propose a 'IoT-RTE Cyclone model' which emphasizes the agility of the enterprise. In addition, based on the real-time monitoring, analysis, act through IT and IoT technology. 'IoT-RTE Cyclone model' that could integrate the business processes of the enterprise each sector and support the overall service. therefore the model be used as an effective response strategy for Enterprise. In particular, IoT-RTE Cyclone Model is to respond to external events, waste elements are removed according to the process is repeated. Therefore, it is possible to model the operation of the process more efficient and agile. This IoT-RTE Cyclone Model can be used as an effective response strategy of the enterprise in terms of IoT era of rapidly changing because it supports the overall service of the enterprise. When this model leverages a collaborative system among enterprises it expects breakthrough cost savings through competitiveness, global lead time, minimizing duplication.

• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.185-212
• /
• 2014

This study investigated the base of marine leisure facilities and studied the future vision for development of marine industry by conducting a systematic analysis on the category of marine leisure products for development of design and specialization of southeast area of Korea. If the age of $20,000 of per capita national income is called 'the age of my car', $20,000 of per capita national income is called 'the age of my boat'. According to the report of UK-based Marine South East, the scale of world's small boat and personal waterborne equipment reached 277 trillion won in 2010 and domestic market scale is expected to be 11 trillion won. Marine leisure facilities are the new growth engine industry that the government should promote as a nation's strategic and core industry, and the government is pushing ahead with promotion of marine industry actively by announcing Marine Leisure Equipment Industry Activation Plan(June 2009, Ministry of Knowledge Economy), Marine Leisure Activation Plan(July 2010, Ministry of Land, Infrastructure and Transport), The 1st General Plan for Marina Port(January 2010, Ministry of Land, Infrastructure and Transport) etc. The purpose of marine design lies in seeking the status of the country and qualitative value in human life through functional, artistic, industrial and cultural development of design elements for all marine activities made around the sea. Related to all activities made in the ocean and cost, marine design is a sphere of design that includes special conditions centering around water. Considering the condition that 3 sides of land are facing the sea, this study systematically analyzed present condition of equipment possessed by each area, type of facilities, operational status, current status of sectoral use of marine leisure facilities and future prospect of marine leisure products that become the basis of value to raise the statue as an advanced marine power in 2010s through development of the qualitative level of the people, establishment of the direction of national strategy, convergence of industry and culture and specialization of area focusing on the actual condition survey of marine leisure facilities. Especially, this study will be predicting the basis of strategy for strengthening marketability and competitiveness by suggesting role and process of design in developing a promising marine leisure product through an actual condition survey of marine leisure products of southeast area.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1069-1078
• /
• 2008

The purposes of this study were to identify the consumer behavior using in campus specialty coffee shop and to establish the marketing strategies through Importance-Performance Analysis (IPA) of service quality. Questionnaires were distributed to 725 students at K University located in Masan, from April 23 to May 3, 2007. Finally, 621 questionnaires were included in the final analysis (response rate: 85.7%). For statistical analysis, SPSS (12.0) was used to conduct the descriptive analysis, t-test, factor analysis and reliability test. The results of this study were as follows. The average cost of using specialty coffee shop in campus was \ 2,096, the average staying time was 25.92 min and the average number of visits per month was 2.17 times. The importance level of 'employee's attitude', 'physical environment', 'sensory quality of coffee', 'beverage features', 'representativeness' were 3.88, 3.79, 3.73, 3.67, 3.28 points, respectively. Also, the performance level of 'sensory quality of coffee', 'beverage features', 'employee's attitude', 'physical environment', 'representativeness' were 3.13, 3.06, 3.05, 2.77, 2.61, respectively. The importance and performance levels of service quality of specialty coffee shop in campus were significantly different (p<.001). Establishment of marketing strategies for in campus speciality coffee shop was possible through the IPA of service quality. Strategies for improving customer satisfaction were to secure enough chairs/ tables, to procure comfortable chairs for customer and to ensure the quality of coffee bean and service of employee.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.139-148
• /
• 2020

Due to change in circumstances in the 2000s such as severe birthrate decline and shortened military service period, the armed forces of the Republic of Korea is currently turning to technologies and equipments from manpower, developing it to become high-tech, high-speed, and complex, resulting in an environment in which a single mistake could cause a mass mortality crisis.It is also evident that, considering aspects such as safety training curriculums and achievements of advanced countries and private education, hands-on training is a must in preventing suicides and accidents in the military, and establishing safety training centers is crucial for systematic and effective hands-on training.Soldiers who are joining the army as of now have experienced the Internet ever since they were born and easily use both virtual and augmented reality, and the current level of science and technology has developed to the point where most of the public safety experience centers are able to be replaced by virtual and augmented reality (VR/AR). Therefore, considering the aspects such as installation space, construction costs, maintenance costs, user characteristics, and education effects, other than for those trainings where real models and objects are more effective such as first aid training, it is with a strong recommendation that establishing military safety training facilities with VR/AR (Virtual and augmented reality) is a must in the coming future. We have derived the need for hands-on training by considering the development of virtual and augmented reality (VR/AR), analysis of operation status of the public safety experience centers, characteristics of military units, installation and maintenance costs, and proposed plan to establish safety training centers where effective training performance can be achieved at a lower cost than the public safety experience center. In addition, we suggested the scale of the required safety training center and the composition of the experience rooms considering the number of trainees and the environment of each military units. Given this analysis it will contribute to the prevention of military safety and suicide by building a safety training center in the future.

• Archives of design research
• /
• v.17 no.4
• /
• pp.177-190
• /
• 2004

The purpose of this study is to provide domestic small and medium manufacturing businesses with effective ways of introducing and promoting design management, earnestly, as a key strategy for raising corporate competitiveness. For the purpose, this researcher discussed the management property of small and medium businesses, the introducing process and method and the necessity of promoting design management in small and medium businesses. Then the researcher reviewed and analyzed existing empirical studies to know the current status of design introduction and design management promotion i domestic small and medium businesses. Results of the study can be described as below. Prerequisite to the successful introduction by domestic small and medium businesses of design management are three CEO determinations - the firm will to the necessity of design introduction, the firm conviction in design efficacy, and the clear recognition of the existential value of design - and the establishment of at least five infrastructures -design organization, CDO, designers, design policy, and design strategy. For the promoting and succeeding in the execution of design management, design management system should have established based on such determinations and infrastructures, and CEOs should have design management mind firmly established and driven and realized next activities in the process of product development. 1) Set the principle of design priority in a new product development and establish an appropriate production system and environment. 2) Decide a new design development as the top-priority task of management and then practice it in a strategic way. 3) Be positive in design investment while accepting design management as a concept related not to cost, but to investment. 4) Utilize design extensively under the understanding that design management has something to do with corporate design system as a whole. 5) Treat design as the most valuable resource of business under the recognition that design is the most important determinant of corporate competitiveness.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.398-412
• /
• 2001

The purpose of this study is to examine the roles of the forest-land registry system in the Forest Law of 1908 and the effects this system had on the colonial forest-land policy used in Korea under the influence of Japanese Imperialism. This was started under the Profit-sharing Forest System which was one of the policies for disposing of the Korean national forests. The purpose of this system was to establish forest-land ownership, a fundamental human right. This system was enforced by the Japanese Colonial Government without regard to the customary and important right of Koreans to use the forests, and without considering the distinction between national and private forests. Koreans understood that this system was a warning sign of a tax being imposing on forest-land owners. Furthermore, Koreans thought the Japanese were using this system to deprive them of their forest-land. The strata of Koreans reporting ownership were very limited and included the intellectual(upper-middle) class, higher officials in counties and townships, relatives and relations of these officials, and survey agents. In particular the actual owners could not submit a report registering their land in this system because the required survey cost more than the value of the forest-land. Within the time period specified by the Japanese Colonial Government, about 520,000 registries were reported involving 2.2 million Jung-bo(.9917 hectare) with most of these coming during the last five months of reporting period. Koreans made a reasonable request to extend the deadline, but it was refused. After the reporting period expired there were no follow-up measures such as verification of the reported registrations nor establishment of boundaries between national and private forests. According to Article 19 in the Forest Law of 1908 about 14 million Jung-bo, which was not registered within the reporting period was nationalized. The colonial forest-land policy used in Korea by the Japanese Colonial Government was as follows : (1) to create a large number of national forests in the early period of their rule, (2) to divide these national forests into indispensible national forests and dispensible national forests, and (3) to transfer ownership of the dispensible national forests to colonial Japanese. To achieve the latter, the occupational government needed a method to insure ownership. They devised a tree-planting scheme in which the national forests classified as disposable were "loaned" and then transferred to these Japanese. The actual Korean owners claimed title to this forest-land and asked for the eviction of the new owners but the Japanese occupation government rejected these suits using the excuse that previous Korean owners did not submit the required registration report within the specified time period. In short the Principle of Forest-land Registry was used as a means to consolidate the forest-lands of Korea and distribute large portions of it to Japanese citizens after seizing it from the rightful Korean owners.

• Cartoon and Animation Studies
• /
• s.45
• /
• pp.147-175
• /
• 2016

This thesis aims to research ways for the regional balanced development of cartoon creation & production environment being centered in metropolitan area in Korean cartoon industry which has rapidly changed since 2013. As a cartoon can not only be produced with relative lower production cost comparing to those of other cultural contents industries, but also can be produced only if the minimal requirements for cartoon production is prepared, so the cartoon is a field that the decentralization can be accomplished very easily. Currently, most cartoon-relevant companies and cartoon promotion institutions are located in Seoul an Bucheon, etc. However, cartoon artists live nationwide, and even cartoon artists producing their works abroad are reached to a significant number. In some regions like Daejeon, Busan, Suncheon and Gyeongbuk (Gyeongsangbuk-do), there have been appeared full-scale movement to construct regional cartoon creation & production centers since 2015. This thesis aimed to investigate each region's movement to construct cartoon creation & production center with oversea cases, and to check how such movement could be balanced and harmonized with each region's unique features. First of all, this thesis analyzed the status quo of government's policy nurturing the cartoon industry. Korean government's cartoon-promotion policy around the axis of the Cartoon Industry's Mid.Long-Term Development Plan has been developed around the Korea Creative Content Agency and the Korea Manwha(cartoon) Contents Agency in Bucheon, but as the webtoon industry has rapidly grown up, the necessity for building a cartoon promotion institution in each region has been raised since 2015. With the establishment of 4th Cartoon Industry Mid.Long-Term Development Plan to be executed from 2019, it seems that full-scaled support framework for cartoon regional balanced development should be occupied. For the case of foreign countries, cartoon promotion institutions and relevant events have been developed around regions from early times like San-Diego, USA(Comicon), Angouleme, France(National Image Center), Kyoto (Cartoon Museum), Sakaiminato(Misuki Sigeru Road), Japan gave a lot of implications. In the section of conclusion, this study aimed to suggest the importance of and necessity for establishing a cartoon creation & production center in each region appropriately for the region's identity and characteristics with specific plans. Based on that, this thesis aimed to suggest a vision for cartoon & webtoon industry that regional creation & production system can be settled almost only in the cultural contents industry.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.49-62
• /
• 2006

The republic of korea has put a great emphasis on the role of the road as widening a social infra-structural facility. Thus, vast amount of money has been invested on the road establishment. As a result, there has been fruitful outcomes in establishing the road system of the nation especially for the flat road with ease. However, in order to have more systematic and sustainable road system, we should turn our attention to more painful and high-cost regions such as mountainous districts and those are to be developed effectively. The configuration of the road is an important factor to be considered in making a decision for the road planning. Nevertheless, current road planning criterion has no such clarified and objective judging standard for figuring the configuration of the road out and, as a result, speed planning can be decided incorrectly. our research has acknowledged the necessity of estimating the configuration of the road and aimed to make it organized and sorted according to the height, slope, and the vehicle's speed. The results are as follows. First, our research made use of GIS data and classified the road into 9 different areas according to the height and the slope. Also, road classification being matched to the data of vehicle's speed, it has been shown that those characteristics of different areas have made an influence on vehicle's speed. Secondly, based on the results of the similarity between geographical classification and, vehicle's speed of sorted groups according to the height and the slope, conclusively we have classified as flat, rolling region and mountain. Since our research has made use of vehicle's speed for National Highway, it is not applicable to different functional highways. However, for the highway to be established hereafter, it can be a standard for reflection geographical characteristics.

• Journal of Families and Better Life
• /
• v.2 no.1
• /
• pp.35-55
• /
• 1984

This study aims to present basic data for a reasonable home management through investigating the change of home economy conditions incidental to the family life cycle, also through analyzing the effect of socio-anthropological variables on the family-life cycle. The data investigation using the questionnaires method was conducted on housewives in Seoul as the central census tract. Housewives as the subject of investigation were chosen by the method of the purpose-sampling in consideration of the regional differences and the socio-economical strata. Nine hundred and forty questionnaires were distributed to housewives but seven hundred questionnaires were collected. Only five hundred and ten questionnaires of them were analyzed in this study. The frequency and the percentage of collected data, first of all, were founded in order to grasp the general characteristics of the subject of investigation. To classify the stage of family life cycle, the correlations of the classifying factors among each group were examined x2 Test and One-Way ANOVA were applied to explore the differences among each stage of the change of household-economy. And the effect of socio-anthropological variables on the change of household- economy was analyzed by Two-way ANOVA. the conclusions derived from the results of this study are as follows; 1) The marriage-period and the educational conditions of the first child were selected as the classifying factors through analyzing correlation among the age, the marriage-period and the educational conditions of their children. As a result of this analysis, the family life cycle were classified into seven stages: Stage 1; Establishment Stage 2; Preschool family Stage 3; Elementary school family stage 6; Adult period family Stage7; Marriage period family . 2) The change of household economy incidental to the progress of family life cycle has a significant differences in all of variables (except the other member of family's income) Stage 1; Though the husband's income and the income from property are on a low level, the total income is on a high level due to the housewife's income. Stage 2; The total income is on a low level owing to the decrease of house wife's income, though the husband's income keep growing. Stage 3; Owing to the increase of husband's income, the cost of living as well as the total income keeps growing but the savings are on the decrease. Stage 4; Compared with Stage 3, the total income tends to be on a low level but the living expenses are on the increase. Stage 5; The husband's income is on the highest level in the stages of family life cycle. The total income and the living expenses are on a high level. Stage 6; The income of husband and housewife are on the remarkable decrease but the children's income is on the increase. Stage 7; Owing to the increase of the children's income and the income from property, the total income is on the highest level in the stages of family life cycle. 3) Considering the effect of socio-anthropological variables on the conditions of household-economy, family system has an significant effect on children's income. the husband's occupation exerts a significant effect upon the housewife's and children's income. The husband's schooling exercises an effect upon the children's income. S.E.S has a important effect on the income of husband, housewife and children. From the above results, it is found that the change of household-economy conditions is incidental to the progress of family life cycle. Therefore, a suitable measure to cope with the desire of family and the conditions of household-economy should be prepared, in order to carry on a reasonable home management.