• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1262-1267
• /
• 2005

Elliptical basis function (EBF) neural network works stably under high-level background noise environment and makes the nonlinear processing possible. It can be adapted real time VAD with simple design. This paper introduces VAD implementation using EBF and the experimental results show that EBF VAD outperforms G729 Annex B and RBF neural networks. The best error rates achieved by the EBF networks were improved more than $70\%$ in speech and $50\%$ in silence while that achieved by G.729 Annex B and RBF networks respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2035-2042
• /
• 1997

We consider the design of soft decision functions for each stage of multistage detection for coherent demodulation in an asynchronous code-division multiple-access(CDMA) system. In particular, the sigmoid function, which is shown to be optimal under the mean square error(MSE) criterion, andmultilevel quantizers that best approximate the sigmoid function are derived. At each stage of multistage detection, the parameters of these decision functions are adjusted depending on estimated input statistics. Computer simulation results demonstrate that multistage detectors employing these soft decision functions perform considerably better than those with hard decision.

• Wind and Structures
• /
• v.24 no.3
• /
• pp.223-247
• /
• 2017

By using numerical simulation, vast and detailed information and observation of the physics of flow over a train model can be obtained. However, the accuracy of the numerical results is questionable as it is affected by grid convergence error. This paper describes a systematic method of computational grid refinement for the Unsteady Reynolds Navier-Stokes (URANS) of flow around a generic model of trains using the OpenFOAM software. The sensitivity of the computed flow field on different mesh resolutions is investigated in this paper. This involves solutions on three different grid refinements, namely fine, medium, and coarse grids to investigate the effect of grid dependency. The level of grid independence is evaluated using a form of Richardson extrapolation and Grid Convergence Index (GCI). This is done by comparing the GCI results of various parameters between different levels of mesh resolutions. In this study, monotonic convergence criteria were achieved, indicating that the grid convergence error was progressively reduced. The fine grid resolution's GCI value was less than 1%. The results from a simulation of the finest grid resolution, which includes pressure coefficient, drag coefficient and flow visualization, are presented and compared to previous available data.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.351-359
• /
• 2009

Nowadays, a precision multiple-beam epoch sounder is a depth-sounding apparatus, which is widely used especially for the mapping of bottom of the sea in the coastal area and the bed of river. However, there has been no attempt to verify the accuracy of the depth-sounding apparatus with the data obtained through the actual measurement. As a consequence, the efficient and systematic evaluation of the survey results cannot be performed. In this paper, the accuracy of the multiple beam echo sounder is analyzed by comparing the in-situ measurements and reference data. The test results show that the highest level of accuracy, indicated by IHO, can be achieved even though the magnitude of error increases with the depth of water.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.99-106
• /
• 2001

In this paper, an 1-Watt amplifier for IMT-2000 was designed and fabricated using feedfarward method which has the highest linearity and wide bandwidth. Since feedforward is sensitive to surroundings for example heat, input power level, time and so on, adaptive controller using micro controller is adopted. We fabricated a HPA with 35 dB gain, 40 dBm of 1-dB compression point, and utilized variable attenuator and variable phase shifter using reflection type to cancel loop signal. From the measured results, the fo11owing facts were obtained, in signal loop, main carrier over 35 dB was suppressed and error signal over 30 dB is cancelled in error loop, IMD characteristics above 60 dBc were obtained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2064-2075
• /
• 2011

In this paper, robust multi-level perturbation and observation (MLPO) maximum power point tracking (MPPT) control are presented of the environmental change including the solar radiation and temperature. Because the maximum power point of the Photovoltaic (PV) is changing according to the solar radiation and temperature, the technology which traces the maximum power point in order to increase the power efficiency is recognized as the very important part. The general requirement for the MPPT is that system is simple, the cost is inexpensive, the PV tracking function and output change are small. Conventional perturbation and observation (PO) method is a simple system but there is the disadvantage that an efficiency of system becomes low. In addation, the incremental conductance (IC) control is required expensive CPU because of a large of calculations. In order to solve this problem, in this paper, the MLPO MPPT control using the method diversifying the step size according to the environment condition is presented. The validity of the MLPO method presenting from this paper is proved through analyzing the solar power generation output error at the steady state.

• IE interfaces
• /
• v.18 no.2
• /
• pp.158-166
• /
• 2005

Human-error and mental stress caused by psychophysiological dissonance between people and artificial environments have become a social problem. And it is a common knowledge that comfort environment reduces human-error and mental stress. Comfort sensibility is related to complex interactions between fabric, climatic, physiological and psychological variables. Currently, comfort sensibility has been evaluated by many sensory tests. However, it is difficult to evaluate comfort sensibility because a concrete concept of comfort sensibility is hard to define. In this paper, we propose a model to evaluate the comfort sensibility using Fuzzy-weighted score on an individual's subjective state for the stimulus. To represent the degree of comfort sensibility level for the stimulus, we represent comfort sensibility using 2 dimensional sensibility vector model. And we use the fuzzy-weighted score that is a fuzzy version of the weighted checklist technique computerized for evaluating the subjects. As an example, this model is applied to 1/f fluctuation sound evaluation. The results show that this model can be effectively used to the quantitative evaluation of comfort sensibility for the stimulus.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.2 no.1
• /
• pp.17-32
• /
• 1992

The multi-layer neural network that has broadly been utilized in designing the controller of robot manipulator possesses the desirable characteristics of learning capacity, by which the uncertain variation of the dynamic parameters of robot can be handled adaptively, and parallel distributed processing that makes it possible to control on real-time. However the error back propagation algorithm that has been utilized popularly in the learning of the multi-layer neural network has the problem of its slow convergence speed. In this paper, an approach to improve the convergence speed is proposed using the fuzzy logic that can effectively handle the uncertain and fuzzy informations by linguistic level. The effectiveness of the proposed algorithm is demonstrated by computer simulation of PUMA 560 robot manupulator.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.478-488
• /
• 2014

Torque pulsation mechanism and highly nonlinear magnetic characterization of switched reluctance motors(SRM) lead to unfavorable torque ripple and limit the variety of applications in industry. In this paper, a modification method proposed for torque ripple minimization of SRM based on conventional torque sharing functions(TSF) to improve maximum speed of torque ripple-free operation considering converter limitations. Due to increasing phase inductance in outgoing phase during the commutation region, reference current tracking can be deteriorated especially when the speed increased. Moreover, phase torque production in incoming phase may not be reached to the reference value near the turn-on angle in which the incremental inductance would be dramatically decreased. Torque error for outgoing phase can cause increasing the resultant motor torque while it would be negative for incoming phase and yields reducing the motor torque. In this paper, a modification method is proposed in which phase torque tracking error for each phase under the commutation added to the other phase so that the resultant torque remained in constant level. This yields to extend constant torque region and reduce peak phase current when the speed increased. Simulation and experimental results for four phase 4 KW, 8/6 SRM validate the effectiveness of the proposed scheme.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.479-484
• /
• 2003

In the current Internet, it is difficult for an Internet Phone to guarantee the QoS due to variable network conditions such as packet loss rate, delay and bandwidth. In addition, the QoS of an Internet Video Phone is more hard to guarantee because of video data. In this paper, we investigate application-level QoS control schemes that can adapt to variable network conditions, and describe an error control scheme and a congestion control scheme. Based on these QoS control schemes, we have designed and implemented an Internet Video Phone System that supports adaptive audio and video delivery. Through experiments, we found that the Internet Video Phone can reduce the packet loss rate considerably as well as adjust the transmission rate considering other TCP flows.