• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1528-1535
• /
• 1994

In this paper, a filtered-X LMS algorithm by new error path identification method is proposed for active noise control system. The proposed algorithm identifies accurately the error path transfer function using three microphones and the control of error signal through double loop scheme with on-line. In the computer simulation using the sinusoidal and the practical duct noise, the proposed algorithm reduces noise level about 29.1dB and 10.4dB, respectively. We can observe the improvement of about 0.5dB and 2.5dB in noise level compared with that obtained using the filtered-X LMS algorithm of Eriksson model.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.1-8
• /
• 2015

Wear leveling techniques have been studied to prolong the lifetime of NAND flash memory. Most of studies have used Program/Erase(P/E) cycles as wear index for wear leveling. Unfortunately, P/E cycles could not predict the real lifetime of NAND flash blocks. Therefore, these algorithms have the limited performance from prolonging the lifetime when applied to the SSD. In order to apply the real lifetime, wear leveling algorithms, which use raw Bit Error Rate(rBER) as wear index, have been studied in recent years. In this paper, we propose CrEWL(Cold data identification using raw Bit error rate in Wear Leveling), which uses rBER as wear index to apply to the real lifetime. The proposed wear leveling reduces an overhead of garbage collections by using HBSQ(Hot Block Sequence Queue) which identifies hot data. In order to reduce overhead of wear leveling, CrEWL does not perform wear leveling until rBER of the some blocks reaches a threshold value. We evaluate CrEWL in comparison with the previous studies under the traces having the different Hot/Cold rate, and the experimental results show that our wear leveling technique can reduce the overhead up to 41% and prolong the lifetime up to 72% compared with previous wear leveling techniques.

• Phonetics and Speech Sciences
• /
• v.6 no.1
• /
• pp.11-19
• /
• 2014

The focus of this study was to investigate whether there is a position effect on identification accuracy of L2 consonants by Korean listeners and to examine how Korean listeners perceive the phonetic properties of initial and final consonants produced by a Korean learner of English and an English native speaker. Most studies examining L2 learners' perception of L2 sounds have focused on the segmental level but very few studies have examined the role of prosodic position in L2 learners' perception. In the present study, an identification test was conducted for English consonants /p, t, k, f, ɵ, s, ʃ/ in CVC prosodic structures. The results revealed that Korean listeners identified syllable-initial consonants more accurately than syllable-final consonants. The perceptual accuracy in syllable initial consonants may be attributable to the enhanced phonetic properties in the initial consonants. A significant correlation was found between error rates and F2 onset/offset for stops and fricatives, and between perceptual accuracy and RMS burst energy for stops. However, the identification error patterns were found to be different across consonant types and between the different language speakers. In the final position, Korean listeners had difficulty in identifying /p/, /f/, /ɵ/, and /s/ when they were produced by a Korean speaker and showed more errors in /p/, /t/, /f/, /ɵ/, and /s/ when they were spoken by an English native speaker. Comparing to the perception of English consonants spoken by a Korean speaker, greater error rates and diverse error patterns were found in the perception of consonants produced by an English native speaker. The present study provides the evidence that prosodic position plays a crucial role in the perception of L2 segments.

• Smart Structures and Systems
• /
• v.15 no.4
• /
• pp.1121-1137
• /
• 2015

This study presents probabilistic-based damage identification technique for highlighting damage in metallic structures. This technique utilizes distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. Diagnostic signals were used to define the scatter signals of different paths. The energy of scatter signals till different times were calculated by taking root mean square of the scatter signals. For each pair of parallel paths an error function based on the energy of scatter signals is introduced. The resultant error function then is used to estimate the probability of the presence of damage in the monitoring area. The presented method with an autofocusing feature is applied to aluminum plates for method verification. The results identified using both simulation and experimental Lamb wave signals at different central frequencies agreed well with the actual situations, demonstrating the potential of the presented algorithm for identification of damage in metallic structures. An obvious merit of the presented technique is that in addition to damages located inside the region between transducers; those who are outside this region can also be monitored without any interpretation of signals. This novelty qualifies this method for online structural health monitoring.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.139-145
• /
• 2004

It is well known that human errors is involved in most of maritime accidents. For the purpose of reducing the influence of human elements on maritime activities, it is necessary to identify the human unsafe acts in those activities. The commonly used methods in identification of human unsafe acts are maritime accident statistics or case analysis. With the statistics data, people could roughly identify what kinds of unsafe acts or human errors have played active role in the accident, however, they often neglected some active unsafe acts while overestimated some mini-unsafe acts because of the inherent shortcoming of the methods. There should be some more accurate approaches for human error identification in maritime accidents. In this paper, the application of technique called grey relational analysis (GRA) into the identification of human unsafe acts is presented. GRA is used to examine the extent of connections between two digits by applying the, methodology of departing and scattering measurement to actual distance measurement. Based on the statistics data of maritime accidents occurred in Chinese waters in last 10years, the relationship between the happening times of maritime accidents and that of unsafe acts are established with GRA. In accordance with the value of grey relational grade, the identified main human unsafe acts involved in maritime accidents are ranked in following orders: improper lookout, improper use of radar and equivalent equipment, error of judgment, act not in time, improper communication, improper shiphandling, use of unsafe speed, violating the rule and ignorance of good seamanship. The result shows that GRA is an effective and practical technique in improving the accuracy of human unsafe acts identification.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.625-628
• /
• 1997

In this paper the new neural network and sliding mode suspension controller is proposed. That neural network is error self-recurrent neural network. For fast on-line learning, this paper use recursive least squares method. A new neural networks converges considerably faster than the backpropagation algorithm and has advantages of being less affected by the poor initial weights and learning rate. The controller for suspension systems is designed according to sliding mode technique based on new proposed neural network.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.649-653
• /
• 1988

The inertial measurement units in Strapdown System are characterized by the fact that sensors directly mounted to the vehicle frame. So the sensors are subjected to the translatory and rotation dynamics of the vehicle. The sensor outputs involve many error terms. We must compensate the error terms for accuracy improvement. The method which identify the error parameter is studied and suggested.

• MALSORI
• /
• no.57
• /
• pp.165-174
• /
• 2006

In this paper we use a training algorithm, MCE (Minimum Classification Error), to improve the performance of a text-independent speaker identification system. The MCE training scheme takes account of possible competing speaker hypotheses and tries to reduce the probability of incorrect hypotheses. Experiments performed on a small set speaker identification task show that the discriminant training method using MCE can reduce identification errors by up to 54% over a baseline system trained using Bayesian adaptation to derive GMM (Gaussian Mixture Models) speaker models from a UBM (Universal Background Model).

• Structural Engineering and Mechanics
• /
• v.44 no.5
• /
• pp.585-600
• /
• 2012

This paper presents a Modified Tikhonov Regularization (MTR) method in model updating for damage identification with model errors and measurement noise influences consideration. The identification equation based on sensitivity approach from the dynamic responses is ill-conditioned and is usually solved with regularization method. When the structural system contains model errors and measurement noise, the identified results from Tikhonov Regularization (TR) method often diverge after several iterations. In the MTR method, new side conditions with limits on the identification of physical parameters allow for the presence of model errors and ensure the physical meanings of the identified parameters. Chebyshev polynomial is applied to approximate the acceleration response for moderation of measurement noise. The identified physical parameter can converge to a relative correct direction. A three-dimensional unsymmetrical frame structure with different scenarios is studied to illustrate the proposed method. Results revealed show that the proposed method has superior performance than TR Method when there are both model errors and measurement noise in the structure system.

• Structural Monitoring and Maintenance
• /
• v.1 no.4
• /
• pp.427-449
• /
• 2014

A hybrid optimization method for the identification of state-space models is presented in this study. Hybridization is succeeded by combining the advantages of deterministic and stochastic algorithms in a superior scheme that promises faster convergence rate and reliability in the search for the global optimum. The proposed hybrid algorithm is developed by replacing the original stochastic mutation operator of Evolution Strategies (ES) by the Levenberg-Marquardt (LM) quasi-Newton algorithm. This substitution results in a scheme where the entire population cloud is involved in the search for the global optimum, while single individuals are involved in the local search, undertaken by the LM method. The novel hybrid identification framework is assessed through the Monte Carlo analysis of a simulated system and an experimental case study on a shear frame structure. Comparisons to subspace identification, as well as to conventional, self-adaptive ES provide significant indication of superior performance.