• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.764-769
• /
• 1988

In this paper the failure possibility and the error possibility are used to represent reliability of a technical component and that of a human operator, respectively. The failure possibility and the error possibility are fuzzy sets on the interval [0,1]. In a man-machine system, reliability of the technical component and that of the human operator are usually affected by many factors, e.g., the environment in which a machine is operated, psychological stress of the human operator, etc. The possibility is derived from not only the failure or the error rate but also estimates of these factors. The fuzzy reasoning plays an important role in the derivation. The reliability analysis is performed by the use of the possibility obtained by the present method. Moreover this paper discusses the sensitivity analysis which evaluates what extent the change of the estimation of each factor has an influence on reliability of a man-machine system. The important factors to be ameliorated are shown through the sensitivity analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.1-14
• /
• 1997

In conventional probability-based human reliability analysis, the basic human error rates are modified by experts to consider the influences of many factors that affect human reliability. However, these influences are not easily represented quantitatively, because the relation between human reliability and each of these factors in not clear. In this paper, the relation is expressed quantitatively. Furthermore, human reliability is represented by error possibilities proposed by Onisawa, which is a fuzzy set on the interval [0,1]. Fuzzy reasoning is used in this method in order to obtain error possibilities. And, it is supposed that many basic events affected by the above factors are connected to the top event through Fault Tree structure, and an estimate of the top event expressed by a member- ship function is obtained by using the fuzzy measure and fuzzy integral. Finally, a numerical example of human reliability analysis obtained by this method is given.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.551-560
• /
• 2010

In this paper, we suggest a localization method of factors affecting the accuracy of Air-to-Ground weapon delivery. The proposed method, called FBEL(Factor-Based Error Localization), is based on the fault localization technique widely utilized in the realm of software engineering field. FBEL localizes the major factors affecting the performance of weapon delivery. To analyze the effectiveness and the applicability of FBEL, we applied FBEL to real firing data and got the major factors caused the errors. We expect that the method could contribute to improve the quality of weapon delivery system. We also expect that it may aid improvement of pilot capability greatly, if it is applied to pilot firing training.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.7
• /
• pp.345-349
• /
• 2000

This paper presents an extended integral control with the PI controller by introducing the delay and decaying factors. The extended integral control scheme is developed by substituting the proportional convolution integral control for the PI(Proportional Integral) control. So far, the integral part of PI controller produces a signal that is proportional to the time integral of the input signal to the controller. The steady-state operation points are affected forever by errors in the past due to the input signal containing the information of the error in the past. These phenomena may cause some disturbances for other control purposes related to the given PI control. Introduction of forgetting factors to the error in the past can resolve the disturbance problems. Various forgetting factors are developed using the delay elements, the decaying factors, and the combination of the delay and decaying factors. The proposed various extended integral control schemes can be applicable to the corresponding PI control designs in which the error in the past may badly affect the current steady-state operation points and may cause some disturbances for other control purposes.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.647-654
• /
• 2021

This study examines the non-performing loans of rural banks and macroeconomic factors in Indonesia, including inflation, exchange rates, and interest rates. Theoretically, the existence of erratic macroeconomic conditions can affect the level of non-performing credit risk in rural credit banks in Indonesia. The effect of macroeconomic conditions on non-performing loans has a different response for each economic sector. The main objective of this study is to determine the effect of macroeconomic factors (inflation, exchange rates, and interest rates) and bank-specific factors (credit) on the Non-Performing Loans (NPL) of Rural Banks in Indonesia for the period from January 2015 to December 2018. This study uses a Vector Error Correction Model (VECM) estimation to determine the effect of independent variables consisting of macroeconomic factors and bank-specific factors. Based on the estimation results of the Vector Error Correction Model, three variables that have a positive and significant effect on long-term non-performing loans are credit, inflation, and interest rates. Meanwhile, in the short term, there are only two variables that have a positive and significant effect on non-performing loans, namely, credit and interest rates. Inflation and exchange rate variables have a negative and insignificant effect on bad credit in the short term.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.159-166
• /
• 2005

This study deals with the correction of gear tooth profile error by finish roll forming. First, we experimentally confirmed that the tooth profile error is a synthesis of the concave error and the pressure angle error. Since various types of tooth profile errors appear in the experiments, we introduced evaluation parameters for rolling gears to objectively evaluate profile quality. Using these evaluation parameters, we clarified the relationship among the tooth profile error, the addendum modification factor (A. M. factor), and the tool loading force. We verified the character of concave error, pressure angle error, tool loading force and number of cycles of finish roll forming by using a forced displacement method. This study makes clear that tool loading force and number of cycles of finish roll forming are very important factors that affect involute tooth profile error. The results of the experiment and analysis show that the proposed method reduces concave and pressure angle errors.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.279-285
• /
• 1998

This study investigated human error characteristics of the 42 fatal industrial accidents reported by staff members of Korea Industrial Safety Corporation. Various types of human error were judged to be primary contributing factors in about 74 percent of the cases. Most of human error made by involved industrial operators resulted from two types of mistakes: (1) mistake in judgement of work situation, and (2) omission in daily check. It was concluded that preparation/observance for work procedure manuals, danger predication training and enforcement/Education of daily check routine would be effective preventive tools for these types of human error attributable to fatal industrial accidents.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.100-105
• /
• 2002

The comprehensive system analysis for contour milling operation and its error has performed in this study. The obtained experimental results were from the practical points of view. In down-milling operation the contour error curve illustrates bigger thean actual workpiece radius. The contour error increased when the cutter loads increased. Through the procedural evaluation, it could ascertain the characteristics of generation mechanics in circular contour machining error, and the weight of each factors.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.2
• /
• pp.99-111
• /
• 2001

Human factors is a key issue in the maritime industry including ship design and navigation safety. Human factors for ship design is to optimize safety and convenience of crews and passengers. And human factors for navigation safety is to minimize marine accident occurrence by human and organizational error. There are several technical requirements to incorporate human factors and marine system Risk analysis. human behaviour analysis and human M&S(modeling and simulation) are examples of technical requirements. This paper provides the key issues and technologies of human factors for ship design and navigation safety.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.263-271
• /
• 1990

In this paper, we shall construct a ridge estimator in a multiple linear model with the correlated error structure. The existence of the biasing parameter satisfying the Mean Squared Error Criterion is also proved. Furthermore, we shall determine the value of shrinkage factors by the iteration method.