Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Circular Contour Machining Error

  • Namkoong, Chaikwan (Dept.of Mechanical Design Automatic Engineering, Seoul National University of Technology)
  • Published : 2002.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The comprehensive system analysis for contour milling operation and its error has performed in this study. The obtained experimental results were from the practical points of view. In down-milling operation the contour error curve illustrates bigger thean actual workpiece radius. The contour error increased when the cutter loads increased. Through the procedural evaluation, it could ascertain the characteristics of generation mechanics in circular contour machining error, and the weight of each factors.

Keywords

References

  1. ASME Trans. J. Engng Ind. v.113 Adaptive Matching and Preview Controllers for Feed Drive Systems H.A. Park
  2. ASME Trans. J. Dyn. Syst. Meas. Control v.109 Zero Phase Error Tracing Algorithm for Digital Control M. Tomizuka https://doi.org/10.1115/1.3143822
  3. ASME Trans. J. Dyn. Syst. Meas. Control v.113 Reference Input Generation for High Speed Coordinated Motion of a Two Axis System J. Buttler;B. Haack;M. Tomizuka https://doi.org/10.1115/1.2896361
  4. Ann. CIRP v.39 Sharp Corner Tracking Using the IKE Control Strategy M. Weck;G. Ye. https://doi.org/10.1016/S0007-8506(07)61091-9
  5. ASMETrans. J. Dyn. Syst. Meas. Control v.102 no.4 Cross-coupled biaxial Computer Control for Manufacturing Systems Y. Koren https://doi.org/10.1115/1.3149612
  6. Ann. CIRP v.104 Variable Gain Cross-coupling Controller for Contourin Y. Koren;C.C. Lo
  7. Int. J. Mach. Tools Manufact v.36 no.6 The Regulation of Position Error in Contouring Systems I. Yellowley;R.J. Seethaler https://doi.org/10.1016/0890-6955(95)00055-0
  8. Int. J. Mach. Tools Manufact v.34 no.2 The Integration of Process and Geometry within an Open Architecture Machine Tool Controller I. Yellowley;P.R. Pottier https://doi.org/10.1016/0890-6955(94)90106-6
  9. ASME Trans. J. Engng Ind. v.118 no.3 The Control of Multiple Constraints within an Open Architecture Machine Tool Controller R. Ardekani;I. Yellowley
  10. Int. J. Mach. Tools Manufact v.29 no.2 A Note on a Simple Method for the Improvement of Interpolation Accuracy in a General Purpose, Multiprocessor Based Motion Controller I. Yellowley;P. R. Pottier https://doi.org/10.1016/0890-6955(89)90040-0
  11. Ann. CIRP v.39 Determination of the Equivalent Diameter of Machinability Evaluation using a Workpiece Model L. Kops;D.T. Vo https://doi.org/10.1016/S0007-8506(07)61010-5
  12. Journal of the Korea Society of Machine Tool Engineers v.10 no.6 Contour Machining Error in NC Milling Process C.K.Namkoong;I. Yellowley
  13. Journal of the Korea Society of Machine Tool Engineers v.9 no.4 Study of Machined Surface Error Compensation for Autonomous Manufacturing System T.I. Seo;Y.W.Cho