• 응용통계연구
• /
• 제24권5호
• /
• pp.791-797
• /
• 2011

This paper considers the issue of seasonal cointegrating rank selection by information criteria as the extension of Cheng and Phillips (2009). The method does not require the specification of lag length in vector autoregression, is convenient in empirical work, and is in a semiparametric context because it allows for a general short memory error component in the model with only lags related to error correction terms. Some limit properties of usual information criteria are given for the rank selection and small Monte Carlo simulations are conducted to evaluate the performances of the criteria.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.437-447
• /
• 2006

Error Correcting Output Coding(ECOC) is used to solve multi-class problem. It is known that it improves the classification accuracy. In this paper, we compared various criteria to design code matrix while encoding. In addition. we prorpose an ensemble which uses the ability of each classifier while decoding. We investigate the justification of the proposed method through real data and synthetic data.

• 전자공학회논문지B
• /
• 제32B권1호
• /
• pp.85-95
• /
• 1995

The error intensity models for the ML estimation of a signal parameter have been developed in a companion paper [1]. While the methods described in [1] are applicable to any estimation problem with continuous parameters, our main application in this paper is the time delay estimation, and comparisons among the models derived in [1] (i.e. LC, LM, and ALM models)have been made. We first consider the case where only additive Gaussian noise is involved, and then the shot noise environment where coherent impulsive noise is also involved in addition to the Gaussian noise. We compare the models in terms of the probability of error, MSE(Mean Squared Error), and the computational complexity, which are the most important performance criteria in the analysis of parameter estimation. In conclusion, the ALM model turned out to be the most adequate model of all from the viewpoints of the criteria mentioned above.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.19-25
• /
• 2014

효과적인 블라인드 등화기 갱신을 위해, 등화 초기에 요구되는 빠른 수렴 속도와 정상상태에서 요구되는 낮은 오차 레벨을 만족하면서, 또한 등화 초기와 정상상태 간의 완만하면서도 가역적인 전환 특성을 가지는 적응 알고리즘을 제안한다. 제안 방법에서는 신호의 등화 상태를 구분하는 세 기준을 제시하고, 이 기준에 따라 세 오차 중 하나를 발생시키는 하이브리드 오차발생 알고리즘을 사용하여 등화기를 차등적으로 갱신한다. 이때 신호의 등화 상태를 판단하는 기준으로 신호 성상도 상의 신뢰구간을 이용하였으며, 등화기 출력이 놓이는 신뢰구간에 따라 오차를 다르게 발생시켜 등화기를 갱신함으로써 빠르게 그리고 낮은 오차 레벨에 수렴할 수 있음을 보였다. 제안 아이디어의 유용성을 검증하기 위해 모의실험을 통해 기존 방법의 성능과 비교하였다.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.149-155
• /
• 2017

Radiotherapy patients should maintain their treatment position as patient setup is very important for accurate treatment. In this study, we evaluated patient setup error quantitatively according to Cone-Beam Computed Tomography (CBCT) Gamma Density Analysis using Mobius CBCT. The adjusted setup error to the $QUASAR^{TM}$ phantom was moved artificially in the superior and lateral direction, and then we acquired the CBCT image according to the phantom setup error. To analyze the treatment setup error quantitatively, we compared values suggested in the CBCT system with the Mobius CBCT. This allowed us to evaluate the setup error using CBCT Gamma Density Analysis by comparing the planning CT with the CBCT. In addition, we acquired the 3D-gamma density passing rate according to the gamma density criteria and phantom setup error. When the movement was adjusted to only the phantom body or 3 cm diameter target inserted in the phantom, the CBCT system had a difference of approximately 1 mm, while Mobius CBCT had a difference of under 0.5 mm compared to the real setup error. When the phantom body and target moved 20 mm in the Mobius CBCT, there are 17.9 mm and 13.5 mm differences in the lateral and superior directions, respectively. The CBCT gamma density passing rate was reduced according to the increase in setup error, and the gamma density criteria of 0.1 g/cc/3 mm has 10% lower passing rate than the other density criteria. Mobius CBCT had a 2 mm setup error compared with the actual setup error. However, the difference was greater than 10 mm when the phantom body moved 20 mm with the target. Therefore, we should pay close attention when the patient's anatomy changes.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.78-87
• /
• 1996

In this paper, a remeshing criterion has been suggested in order to order to automate the remeshing decision during finite element analysis of metal forming. In order to use for the remeshing decision, two of remeshing criteria have been investigated. One is the use of error estimates based on errors in stresses and strain rate of the finite element solution and the other is the use of geometric characterisreics of distorted elements. As a result, the strain rate error estimate in power norm based on the former is found to give more valuable information about remeshing decision than the ones based on the latter. Examples are given to demon- strate the usefulness of the suggested eroor estimate as a remeshing criterion.

• 응용통계연구
• /
• 제28권3호
• /
• pp.561-571
• /
• 2015

실험영역을 벗어나는 점에 해당하는 반응값 예측을 위한 최적실험을 고려할 때 실험에 필요한 받힘점을 위한 실험기준을 선택하는 경우 매우 신중하여야 한다. 왜냐하면 가정한 모형과 오차구도가 실험영역을 벗어나도 타당하다는 가정을 하여야 되기 때문이다. 따라서 기존문헌의 외삽최적의 실험기준을 이러한 상황에 맞게 설계될 수 있도록 수정하였다. 본 연구에서는 maximin방법을 적용하여 새로운 실험기준의 특징 및 강건성을 단순회귀모형과 이차회귀모형을 기준으로 검정하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.477-482
• /
• 1989

In this paper, the effect of coefficient quantization error is analyzed for digital PID controllers. Stability margins are used as peformance criteria, and the statistical wordlength concept is adopted for coefficient wordlength selection. Finally, an illustrative example is given.

• Communications for Statistical Applications and Methods
• /
• 제2권2호
• /
• pp.376-386
• /
• 1995

Designs for polynomial approximation to the unknown response function are considered. Optimality criteria are monotone functions of the mean squared error matrix of the least squares estimator. They correspond to the classical A-, D-, G- and Q-optimalities. Optimal first order designs are chosen from the invariant designs and then compared with optimal second order designs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1632-1636
• /
• 2005

This paper presents synchronization of two identical Modified Chua's circuits using two strategies of error feedback coupling. In the first method the synchronization is achieved by linear unidirectional and in the second one by linear bidirectional error feedback coupling. Both proposed methods can make the states of the Modified Chua's circuits globally asymptotically synchronized. Numerical results are provided to show the effectiveness of the proposed approaches and to compare them together based on different criteria.