• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.181-189
• /
• 2001

In this thesis, a policing algorithm is proposed, which is one of the traffic management function in ATM networks. The proposed algorithm minimizes CLR(Cell Loss patio) of high priority cells and solves burstiness problem of the traffic caused by multiplexing and demultiplexing process. The proposed algorithm has been implemented with VHDL and is divided into three parts, which are an input module, an UPC module, and an output module. In implementation of the UPC module\`s memory access, memory address is assigned according to VCI\`s LSB(Lowest Significant Byte) of ATM header for convenience. And the error of VSA operation from counter\`s wrap-around can be recovered by the proposed method. ANAM library 0.25 $\mu\textrm{m}$ and design compiler of Synopsys are used for synthesis of the algorithm and Synopsys VSS tool is used for VHDL simulation of it

• Bulletin of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.349-352
• /
• 1989

Two Crystal structures of fully dehydrated partially magnesium exchanged zeolite A, stoichiometries of $Mg_{2.5}Na_7-A$ (a = 12.251 (1) ${\AA}$) and $Mg_{1.5}Na_9-A\; (a\;=\;12.214(1)\;{\AA})$ per unit cell, have been determined from the 3-dimensional X-ray diffraction data gathered by counter methods. All structures were solved and refined in the cubic space group Pm3m at 21(1)$^{\circ}C$. The structures of the dehydrated $Mg_{2.5}Na_7-A$ and $Mg_{1.5}Na_9-A$ were refined to yield the final error indices $R_1$ = 0.042 and $R_2$ = 0.049 with 318 reflections, and $R_1$ = 0.034 and $R_2$ = 0.032 with 252 reflections, respectively, for which I > $3{\sigma}(I)$. Both structures indicate that $Mg^{2+}$ ions are coordinated by three framework oxygens and the angle substended at $Mg^{2+}$ ions, O(3)-Mg(1)-O(3) is ca. $120^{\circ}$, close to the idealized trigonal planar value. $Mg^{2+}$ ions preferentially occupy 6-ring sites and $Na^+$ ions occupy 8-ring sites when total number of cations per unit cell is more than 8.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.6
• /
• pp.748-757
• /
• 2023

Numerical analysis was conducted to confirm the characteristics of extinction behavior in NH₃/CH₄ counterflow symmetrical flames. Numerical simulations were run on CHEMKIN-PRO, using the OPPDIF code, with Okafor's mechanisms, which had the lowest error rate compared to Colson's experimental data in the our previous part I study. The chemical interactions of merged flames were examined by analyzing the production rate of major chemical species and key radicals with the volume fractional percentage of ammonia and global strain rate. The interaction phenomenon of the flames could be identified by observing the main chemical reaction path of the merged flames at the stagnation plane.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.5
• /
• pp.59-70
• /
• 2012

RSA-CRT is one of the commonly used techniques to speedup RSA operation. Since RSA-CRT performs its operations based on the modulus of two private primes, it is about four times faster than RSA. In RSA, the two primes are normally thrown away after generating the public key pair. However, in RSA-CRT, the two primes are directly used in RSA operations. This led to hardware fault attacks which can be used to factor the public modulus. The most common way to counter these attacks is based on error propagation. In these schemes, all the outputs of RSA are affected by the infected error which makes it difficult for an adversary to use the output to factor the public modulus. However, the error propagation has sequentialized the RSA operation. Moreover, these schemes have been found to be still vulnerable to hardware fault attacks. In this paper, we propose two new RSA-CRT schemes which are both resistant to hardware fault attack and support parallel execution: one uses common modulus and the other one perform operations in each prime modulus. Both proposed schemes takes about a time equal to two exponentiations to complete the RSA operation if parallel execution is fully used and can protect the two private primes from hardware fault attacks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.23-30
• /
• 2016

In this study, the heat transfer and pressure drop characteristics were evaluated for multi-tube $CO_2$ water heaters with lengths of 4.5 m and 7.5 m. The evaluation was done using the -NTU method, and the results were compared with experimental data. Water flows through the shell side of the water heater, while $CO_2$ flows through 8 inner tubes. The heater uses a counter-current design to maximize the heat transfer efficiency. The energy balance equation describing the flows of $CO_2$ and water for each node is set up using the section-by-section method. The calculated heat transfer rates agree well with the experimental data within ${\pm}5%$ error. The outlet water temperature decreased linearly with the increase of the water flow rate. The calculated heat transfer rates agreed well with the experimental data within ${\pm}3%$ error. The results show that the heat transfer rate increases almost linearly with the increase of water flow rate or $CO_2$ inlet temperature in both the 4.5-m and 7.5-m water heaters, whereas the water outlet temperature linearly decreases with the increase of the water flow rate. The comparison of the $CO_2$ pressure drop between the calculation and experiment results shows good agreement at the high $CO_2$ flow rate within 5 % error, but the value is about 20 % higher in the experimental pressure drop at the low $CO_2$ flow rate.

• Conservation Science in Museum
• /
• v.21
• /
• pp.41-52
• /
• 2019

The findings of a 2017 safety inspection of the Three-story Pagoda from the Goseonsa Temple site in Gyeongju suggested the possibility that the stone for the second story of the pagoda may have been rotated after the pagoda was disassembled for removal from its original site in 1975. The materials from the pagoda were investigated using photographs and other relevant data from both the Japanese colonial period and from around 1975. The analysis found that the materials of the pagoda were not changed after analleged reconstruction in 1943, but that during the process of relocating the pagoda in 1975 the body of the second story was indeed rotated counter clockwise by 90 degrees and one of the four stone elements making up the first-story roof was exchanged with a part from the second-story roof. In order to discover whether the materials had been incorrectly placed, each part of the pagoda was precisely measured and the elements of the roofs were virtually reconstructed using 3D scanning data. The investigation did not find any singularities with in the components of each roof; the four part sof the first-story roof were 75 to 76 centimeters thick and those for the second-story roof were 78 to 79 centimeters thick. The connections between each part of the roofs also appeared natural. This seems to indicate that there was indeed an undocumented repair of the pagoda at some point between its creation and 1943 and an error that took place during this repair was corrected in 1975. In addition, the study suggested a possibility that the body of the second story was rotated counter clockwised to a change in the locations of parts of the two roofs.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.21-26
• /
• 2008

When the calibration on Liquid Scintillation Counter using the Solid $^3H$ Standard Source of 200,000DPM is executed, the uncertainty due to activity and geometry difference, exists. Therefore, this paper intends to evaluate environmental samples comparatively accurately as decreasing this uncertainty existing in the process of calibration. For this, measurements on samples manufactured by $^3H$ Standard Source and sensitivity study were performed. Also, this paper verified calibration results using Radioactivity-Error-Analysis Method, and evaluated quantitatively the effect by geometry and activity difference based on verification result. According to the result of sensitivity study, in case of using the exposure time of 75 sec and Repeat method, the measuring accuracy and precision of about $1{\sim}3%$ were increased in comparison with the existing method. By analysis result, the effect by activity difference did not appear, and a plastic cell existing into Teflon vial made a role as reflector. The less the effect of plastic cells are decreased, the more activity is high, and the effect of those can be neglected at the activity of 200,000 DPM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.271-277
• /
• 2013

A novel approach to solve signal variation due to ship rocking in maritime wireless communication is introduced. We assume a ship-to-shore based communication scenario, where the transmitter is on shore and the receiver on the ship. Due to the ocean conditions, such as the presence of waves and wind etc. the ship is not stable and constantly experiences some form of rocking motion. This rocking motion causes the antenna on the ship to sway, creating instability in the signal reception. We envisage that the signal is offset at the receiver incurring high Bit Error Rate. This paper is to investigate and counter this problem by using Multiple-input Multiple-output (MIMO) technique. We propose to implement beamforming technique with multiple transmit antennas. The implementation of this proposed method crafts a robust maritime communication network.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.172-179
• /
• 1997

This paper describes a multiplexed-multivariate fiber-optic interferometric sensor system with remote sensing capability. Signal processor of the implemented sensor system is designed as a digital fringe counter that is well adapted to the signal processing of the remote fiber-optic Fabry-Perot interferometric sensor array. By summing up the reported optical data of the optical fiber, a guideline for choosing the optical effect suitable for a specific measurand is presented. As an example, a pressure sensing device that utilizes the strain-optic effect of the optical fiber by attaching it onto a stainless steel diaphragm of which diameter is 4.3 cm, is built and attached to the sensor system. The changes in optical phase difference of the fiber-optic Fabry-Perot interferometric press ure sensor while filling a water tank 2 meters high, was counted by the half-fringe counting signal processor. Test results showed that the measurement error is less than ${\pm}3.6\;cm$ over the measured range of 2 meters.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.69-74
• /
• 2016

Purpose Using a regression formula of the trendline near the coefficient of determination (R2) "1" by substituting the dependent variable of the standard curve to calculate the values of the independent variable. To determine the suitability of a regression equation by comparing the difference between the independent variables of the standard curve and the predicted independent variables. Materials and Methods Perkin Elmer Gamma-Counter machine was used for Standard curve of regression methods. TSH. TG-Ag (Thyroglobulin Antigen), Insulin that used materials and method test to compare the result from the Excel trendline of the regression formula. Results Each of the value of coefficient of determination ($R^2$) and Trendline $R^2=1$, Polynomial Trendline for TSH, $R^2=1$, Polynomial Trendline for TG-Ag, $R^2=0.9994$, Polynomial Trendline for Insulin. Conclusion We confirmed that IRMA immune method is found to the nearest trends elected a standard curve using polynomial trendline. The independent variables to predict the trend by using a polynomial trendline formula containing the error was a limitation.