• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.85-96
• /
• 2014

A waterfall is a channel unit with steep bedrock. No strict criteria for height, water volume, gradient to define waterfalls exist in Korea. The goal of our study is to classify waterfalls based on morphological forms which are the outcomes of developmental processes. The genesis of waterfall depends upon erosional properties of waterfall. The height, gradient, bedrock strength and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. We find out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, gradient and height of waterfalls, therefore, decides morphological forms.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.51-69
• /
• 2012

Physical strength of the rock is the most important factor of resistance to erosion and has been measured through various way. Bedrock microforms, like potholes and grooves, are the forms sculpted by the erosional processes of flow and the location and morphology are strongly affected by the differential erosion. It also assumed that the physical strength of the rock controls the erosion rate and mode of erosion. The schmidt hammer has been used to measure the rock strength in the field for the geomorphological research. To find the relationship between the rock strength and microforms, Schmidt hammer's R(rebound) were measured in the Baeksuktan, middle reach of Gilancheon, Cheongsong, Gyungsangbuk do. The overall values of rebound of the local sandstone showed over 65 in most cases, so it can be regarded as 'very strong'. It is found that the rebound values of the rock surface decreased towards current water level. It also, however, found that there was no systematic differences in rebound values among the topographically high and lows in the bedrock surface. There was no statistically significant difference in rebound values of the area with well developed microforms and others. The values of R from the exposed faces and inside of the microforms are similar. In the case of conglomerate, the part with the gravel showed higher values that the parts with sands. The rebound values are decreased near of(<1cm) the geological discontinuities(including joint and faults), so this line of weakness could be the point of initiation of active erosion to form microforms. However there is large variations in rebound values within this part. It also should be mentioned that topological relation between the strike of the geologic discontinuities and flow direction looks control the mode of erosional processes.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.633-642
• /
• 2005

We present the sedimentary sequence and distribution pattern of the late Holocene muddy deposits in the northern East China Sea shelf using the high-resolution 'Chirp' profiles. The seismic sedimentary sequence overlying acoustic basement (basal reflector-B) can be divided into two depositional units (Unit 1 and 2) bounded by erosional bounding surface (mid reflector-M). The lower Unit 1 above basal reflector-H is characterized by the acoustically parallel to subparallel reflections and channel-fill facies. The upper Unit 2, up to 7 m in thickness, shows seismically semi-transparent seismic facies and lenticular body form. On the base of sequence stratigraphic concept, these two sediment units have developed during transgression and highstand period, respectively, since the last sea-level lowstand. The transgressive systems tract (Unit 1) lie directly on the sequence boundary (reflector B) that have farmed during the last glacial maximum. The transgressive systems tract in this study consists mostly of complex of delta, fluvial, and tidal deposits within the incised valley estuary system. The maximum flooding surface (reflector M) corresponding to the top surface of transgressive systems tract is obviously characterized by erosional depression. The highstand systems tract (Unit 2) above maximum flooding surface is made up of the mud patch filled with the erosional depression. The high-stand mud deposits showing a circle shape just like a typhoon symbol locates about 140 km off the south of Cheju Island with water depth of $60\~90m$. Coverage area and total sediment volume of the mud deposits are about $3,200km^2$ and $10.7\times10^9\;m^3$, respectively. The origin of the mud patch is interpreted as a result of accumulating suspended sediments derived from the paleo-Yellow and/or Yangtze Rivers. The circular distribution pattern of the mud patch appears to be largely controlled by the presence of cyclonic eddy in the northern East China Sea.

• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.177-184
• /
• 1985

The carbonate flat pebble conglomerates (CFPC) are interbedded as lenticular bed in the greenish rhythmite of the upper part of $Hwaj{\check{o}}l$ Formation, $Jos{\check{o}}n$ Supergroup. Pebbles are composed mainly of lime-mudstone with small amounts of bioclasts and silt-sized subangular quartz grains. The matrix among pebbles is composed mainly of sparry calcite with relatively much amounts of bioclasts, silt-sized subangular quartz grains and authigenic pyrite crystals or grains. The sparry calcite of the matrix seems to be the results of neomorphism of skeletal sands and bioclasts. The pebbles are well rounded and no plastic deformations are found. Some pebbles show the outer rim of glauconite. CFPC are not associated with any other intertidal features such as stromatolites, flaser bedding and channel structures. Also any features indicative of subaerial exposure such as dessication cracks, fenestrae and so on are not found in the bed. The sedimentological features of CFPC suggest that the following conditions appear to have been necessary for the formation of CFPC : 1) episodic deposition of thin, permeable calcareous beds separated argillaceous beds; 2) preservation of these beds near the sediment-water interface where they could become rapidly cemented; 3) erosion and redeposition of the partially lithified beds by storms or other exceptional erosional events. Eventually storm erosion and redeposition together represent only one of several critical conditions in the genesis of CFPC. The CFPC are very common in Cambrian and lower Ordovician formations, and become very rare in the younger carbonate formations. The expansion of infauna after Ordovician Period eliminated the widespread potential for rapid submarine cementation which is one of the critical factors to form CFPC.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.4
• /
• pp.53-70
• /
• 2020

Silgyeong sansuhwa (Realistic landscape paintings) are drawn in Korea since 17th century. It has characteristics of more realistic description of landscape than painting from previous periods. Kim Hong Do's 'Haedong Myeongsan docheop (The album of paintings of famous mountains in Korea)' has been recognized as fine example of realistic description of geomorphic landscapes. Kim Hong Do and Kim Eung hwan did official travel to Gwandong and Geumgangsan area by order of King Jeongjo in 1788. As a result of that travel they draw about 100 piece of landscape painting. About 60 pieces of the paintings are still remaining. These are open to public by Korea National Museum in 1996. 14 pieces of painting, Daegwanryeong and Gangneung, Gyeongpo-dae, Hohae-jeong, Gahak-jeong, Cheonggan-jeong, Mun-am, Mangyang-jeong, Wolsong-jeong, Neungpa-dae, Naksan-sa, Mureung-gye, Gyejo-gul, and Hyeonjong-am, are analysed in this study. Coastal depositional landforms, like lagoon, sand beach and spit or barriers, erosional forms, like sea stack, sea cliff and sea cave, depicted in the paintings are analysed. In addition, structural landforms, colluvial landform and bedrock incision form by the running water in mountain area were analysed and weathered forms of granite and excursion to karst cave also discussed. It is found that sea arch in the printing destroyed since 1788, though exact position and reason is still unknown. There are strong need for discovery and identification of geomorphic landscape resources, for applied geomorphological studies and for prepare educational materials for non-face-to-face education. It also be emphasized that it can be used of the course work materials for future education using augmented reality and virtual reality technology.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.808-823
• /
• 2008

Sediment abrasion in rivers is caused by the interaction between bedrock channel bed and sediment particles transported through the river. Abrasion rate of sediment particles in rivers is controlled by two major factors; Sediment transport conditions including hydraulic conditions form the erosive forces and physical and chemical strengths of the particles form a resistance force against abrasion and other erosional processes. Physical experiments were performed to find the role of each variable on sediment abrasion process. Total 266 sediment particles were used in this experiment. All sediment particles were divided into 11 independent sediment groups with sediment particle size and sediment loads. Each sediment groups were abraded in tumbling mill for up to 8 hours. Changes in weight were recorded by run and total: 2,128 cases of abrasion rate were recoded. Physical strength of rock particles was measured with point load strength index. It is found that sediment abrasion rate has a negative functional relationship point load strength index ($I_{a(50)}$) ($R^2=0.22$). It was suggested that physical strength of sediment particles set the "maximum possible abrasion rate'. As sediment flux increases, abrasion rates of sediment particles with similar point load strength index were changed. It could be concluded that not only physical characteristics of sediment particles, but also sediment transport conditions control sediment abrasion rates.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.1
• /
• pp.99-108
• /
• 2012

To consider geomorphological and geological characteristics to Gatbawi(the 500th natural monument), it was investigated with the aspect of scale, form, mineralogy, chemistry and weathered state. Showing typically erosional features, micro-terrains as sea cliffs, sea notches, marine plateaus and tafoni developed well on coastal areas near the monument. Sea cliffs are vertical and form sea notches in their bases. Coastal terraces are 3.5m in width and 20m in trace. Tafoni are honey combed. The monument is mainly composed of quartz, plagioclase, microcline, biotite, sericite in mineral and corresponded to crystalline tuff dominated in quartz and plagioclase. It has 23.60~28.27 wt.% of $Al_2O_3$, 3.27~5.80 wt.% of $Na_2O$, and 0.11~0.20 wt.% of Cl in chemical contents, leveling higher than those of earth crust standards. It is considerably weathered on the basis of CAI(77.42~83.93%). The monument is very useful for natural perspective tourism and education. Therefore, it is necessary that several ideas as guide plates, observing telescope, explaining guider, education programs connected with related services, touring goods, picture for books on utilization on the monument must establish.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.

• Economic and Environmental Geology
• /
• v.15 no.1
• /
• pp.41-47
• /
• 1982

Typical stratigraphic sequences of Paleozoic form the Baegunsan Syncline (equal to Hambaeg Syncline) and Taebaegsan Group is the basement in the southern part of Kangweon Province. Deformation pattern depends on their stratigraphic site and their internal properties. In the biotite schists and meta-sandstones of Pre-Cambrian sequences, flow folds and ptygmatic folds are developed, and high strain deformation is pervasive. Deformational patterns of Cambro-Ordovician are variable because of their various formations. Fracturing is pervasive in the Jangsan Quartzite and Daegi and Maggol Limestone. Welldeveloped slaty cleavage and angular folds of kink and chevron types are the prevailing structures of pelitic rocks. The most characteristic feature of limestone alternated with argillite is the "Compositional cleavage (Author's proposal)" known as the "Worm-eatern" structures. It was known that this structures have a sedimentary origin. But their preferred orienation of long axis of erosional lime holes, originated from tectonic deformation of folding. And this structures have the same character as the axial plane cleavages. Fracturing and long wave concentric folds are dominant characters of the Upper Paleozic sequences. In this area, two folds are superimposed. Field studying and analysis of structures show that the cross-folds of NS-direction are pervasive and were deformed by the EW-directional Baegunsan Syncline. The cross-folding is the major and penetrative deformation and prior to Baegunsan Syncline.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.68-77
• /
• 2013

This report is based on the investigation of potholes which are formed by fluvial erosion. A pothole is called so because it is a hole that looks like a coffeepot. The results of previous studies are applied to the 'Jakgwaecheon Porthole' of this study. The study is focused on the dimension and morphology of the Pothole and investigates the effects of stream sediments, river flow, geological structural lines, etc. on the formation of potholes. As a result of measuring 61 potholes in this area, we recognized that the elliptical dish-shaped cross sections are dominant and inferred that their longitudinal direction on the plain is affected by the direction of the stream flow. Also, 'Jakgwaecheon Pothole' is very characterized in terms of scale and morphology. Furthermore, it is harmonious with the beautiful landscape, humanity, and historical values and it can be suggested that it is qualified to be registered as a geoheritage structure.