• 제목/요약/키워드: Erosion.Deposition

검색결과 218건 처리시간 0.034초

Kanako-2D를 이용한 사방댐 위치 변화에 따른 토석류 피해지 분석 (Analysis of Debris Flow Disaster Area according to Location Change of Check Dam using Kanako-2D)

  • 김영환;전계원
    • 한국안전학회지
    • /
    • 제33권1호
    • /
    • pp.128-134
    • /
    • 2018
  • With the increase in frequency of typhoons and heavy rains following the climate change, the scale of damage from the calamities in the mountainous areas has been growing larger and larger, which is different from the past. For the case of Korea where 64% of land is consisted of the mountainous areas, establishment of the check dams has been drastically increased after 2000 in order to reduce the damages from the debris flow. However, due to the lack of data on scale, location and kind of check dams established for reducing the damages in debris flow, the measures to prevent damages based on experience and subjective basis have to be relied on. Under this study, the high-precision DEM data was structured by using the terrestrial LiDAR in the Jecheon area where the debris flow damage occurred in July 2009. And, from the numerical models of the debris flow, Kanako-2D that is available to reflect the erosion and deposition action was applied to install the erosion control facilities (water channel, check dam) and analyzed the effect of reducing the debris flow shown in the downstream.After installing the erosion control facilities, most of debris flow moves along the water channel to reduce the area to expand the debris flow, and after installing the check dam, the flow depth and flux of the debris flow were reduced along with the erosion. However, as a result of analyzing the diffusion area, flow depth, erosion and deposition volume of the debris flow generated from the deposition part after modifying the location of the check dams with the damages occurring on private residences and agricultural land located on the upstream area, the highest reduction effect was shown when the check dam is installed in the maximal discharge points.

낙동강 하구 주요 연안사주에서 표층표사의 시.공간적 변화 (Spatiotemporal Variations of Coastal Sediment Transport at Barrier Islands in the Nakdong River Estuary)

  • 전용호;윤한삼;이경선
    • 해양환경안전학회지
    • /
    • 제16권2호
    • /
    • pp.161-168
    • /
    • 2010
  • 본 연구에서는 낙동강 하구 삼각주 지형의 형성 및 발달에 관한 기초적 현장조사 연구로서 사주 퇴적의 원인물질인 해안 표층표사의 퇴적속도를 정량적으로 평가하고자 하였다. 이를 위해 연안사주 중 진우도 및 도요등 전면해역의 사주퇴적현상이 급격하게 발생하는 해안선 지역에 표층 표사의 거동 분석을 위한 현장관측실험구를 설치하고 약 1년간 약 1개월 간격으로 지반고를 측정하여 그 결과를 분석하였다. 얻어진 결과를 요약하면 다음과 같다. (1) 관측기간동안의 일별 침식 퇴적속도 계산 결과, 진우도(St. 1)에서의 침식 퇴적속도는 -1.39~3.56cm/day이며, 도요등(St. 2)의 경우에는 -4.0~3.07cm/day이었다. (2) 관측기간동안 2회의 태풍 내습에도 침식 및 퇴적량이 그리 크게 나타나지 않는 반면에 태풍내습후 10월경에 최대 표사이동량이 나타났다.

유역침식 및 퇴적 잠재능 예측모델 개발 (Prediction of Watershed Erosion and Deposition Potentials)

  • 손광익
    • 한국방재학회 논문집
    • /
    • 제7권1호통권24호
    • /
    • pp.67-72
    • /
    • 2007
  • 본 연구에서는 토사에 대한 질량보존의 법칙을 이용하여 자연유역 내 토양의 침식 및 퇴적 잠재능을 산정할 수 있는 모델을 개발하였다. 이 프로그램은 각 셀 별 토사에 대한 질량보존의 법칙을 적용하여 GIS환경하에서 구동 가능하도록 구성되어있으며 셀 별 토사발생량은 RUSLE 공식을 이용하여 산정하였다. 토양의 침식 및 퇴적 잠재능은 토사의 유출량과 유입량의 차에 의해 각 셀이 침식되거나 퇴적된다는 질량보존의 법칙을 이용하여 산정하였다. 질량보존의 법칙을 적용하기 위한 셀 별 토사유출량은 토사발생량과 토사전달률을 곱하여 산정하였으며 이 토사 유출량이 흐름방향 알고리즘에 의해 결정되는 하류 셀의 토사유입량이 된다. 본 연구에서 개발된 모델을 이용하여 국내 소유역에 대해 적용하였으며 그 결과를 실측치와 비교함으로써 모델을 검증하였다.

An automatic rotating annular flume for cohesive sediment erosion experiments: Calibration and preliminary results

  • Steven Figueroa;Minwoo Son
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.319-319
    • /
    • 2023
  • Flows of water in the environment (e.g. in a river or estuary) generally occur in complex conditions. This complexity can hinder a general understanding of flows and their related sedimentary processes, such as erosion and deposition. To gain insight in simplified, controlled conditions, hydraulic flumes are a popular type of laboratory research equipment. Linear flumes use pumps to recirculation water. This isn't appropriate for the investigation of cohesive sediments as pumps can break fragile cohesive sediment flocs. To overcome this limitation, the rotating annular flume (RAF) was developed. While not having pumps, a side-effect is that unwanted secondary circulations can occur. To counteract this, the top and bottom lid rotate in opposite directions. Furthermore, a larger flume is considered better as it has less curvature and secondary circulation. While only a few RAFs exist, they are important for theoretical research which often underlies numerical models. Many of the first-generation of RAFs have come into disrepair. As new measurement techniques and models become available, there is still a need to research cohesive sediment erosion and deposition in facilities such as a RAF. New RAFs also can have the advantage of being automatic instead of manually operated, thus improving data quality. To further advance our understanding of cohesive sediment erosion and deposition processes, a large, automatic RAF (1.72 m radius, 0.495 m channel depth, 0.275 m channel width) has been constructed at the Hydraulic Laboratory at Chungnam National University (CNU), Korea. The RAF has the ability to simulate both unidirectional (river) and bidirectional (tide) flows with supporting instrumentation for measuring turbulence, bed shear stress, suspended sediment concentraiton, floc size, bed level, and bed density. Here we present the current status and future prospect of the CNU RAF. In the future, calibration of the rotation rate with bed shear stress and experiments with unidirectional and bidirectional flow using cohesive kaolinite are expected. Preliminary results indicate that the CNU RAF is a valuable tool for fundamental cohesive sediment transport research.

  • PDF

Modeling of deposition and erosion of CRUD on fuel surfaces under sub-cooled nucleate boiling in PWR

  • Seungjin Seo;Nakkyu Chae;Samuel Park;Richard I. Foster;Sungyeol Choi
    • Nuclear Engineering and Technology
    • /
    • 제55권7호
    • /
    • pp.2591-2603
    • /
    • 2023
  • Simulating the Corrosion-Related Unidentified Deposit (CRUD) on the surface of fuel assemblies is necessary to predict the axial offset anomaly and the localized corrosion induced by the CRUD during the operation of nuclear power plants. A new CRUD model was developed to predict the formation of the CRUD deposits, considering the deposition and erosion mechanisms. The heat transfer and capillary flow within the CRUD were also considered to evaluate the boiling amount within the CRUD layer. This model predicted a CRUD deposit thickness of 44 ㎛ during a one-cycle operation of the Seabrook nuclear power plant. The CRUD deposition tended to accelerate and decelerate during the simulation, by being related to boiling mechanism on the deposits surface. Additionally, during a three-cycle operation corresponding to the refueling period, the CRUD deposition was saturated at a thickness of 80 ㎛, which was in good agreement with the suggested thickness for CRUD buildupin pressurized water reactors. Surface boiling on the thin CRUD deposits enhanced the acceleration of the deposition, even when the wick boiling properties were not favorable for CRUD deposition. To ensure the certainty of the simulation results, sensitivity analyses were conducted for the porosity, chimney density, and the constants employed in the proposed model of the CRUD.

WEPP 모형을 이용한 경사지 토양유실량 추정 (Estimating of Soil Loss from Hillslope Using WEPP Model)

  • 손정호;박승우;강민구
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2001년도 학술발표회 발표논문집
    • /
    • pp.45-50
    • /
    • 2001
  • The purpose of this study was to estimate of soil loss form hillslope using WEPP(Water Erosion Prediction Project) model. WEPP model was developed for predicting soil erosion and deposition, fundamentally based on soil erosion prediction technology. The model for predicting sediment yields from single storms was applied to a tested watershed. Surface runoff is calculated by kinematic wave equation and infiltration is based on the Green and Ampt equation. Governing equations for sediment continuity, detachment, deposition, shear stress in rills, and transport capacity are presented. Tested watershed has an area of 0.6ha, where the runoff and sediment data were collected. The relative error between predicted and measured runoff was $-16.6{\sim}2.2%$, peak runoff was $-15.6{\sim}2.2%$ and soil loss was $-23.9{\sim}356.5%$.

  • PDF

Analysis of Erosion Risk in a Catchment using Projected Rainfall Data and Spatial Rainfall-Erosion Model

  • Felix, Micah Lourdes;Kim, Joocheol;Choi, Mikyoung;Jang, Ning;Jung, Kwansue
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2021년도 학술발표회
    • /
    • pp.316-316
    • /
    • 2021
  • Erosion in a watershed is one of the main sources of sediment inflow in dams. While sediment management practices can be performed to reduce and manage sedimentation in reservoirs, managing the sediment inflow before it reaches the reservoir should also be consider. The accurate location of areas with high erosion and deposition rates should be determined in order to propose an appropriate sediment management procedure such as the construction of check dams. In this study, the projected rainfall from HadGEMRA-3 for RCP 8.5, was used in C-SEM, a distributed rainfall-erosion model, to determine the projected spatial erosion patterns in Cheoncheon catchment, which is located in the upstream part of Yongdam Dam.

  • PDF

CVD 다이아몬드 코팅의 고체입자 Erosion 특성 (Solid Particle Erosion of CVD Diamond)

  • 김종훈;임대순
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1997년도 제25회 춘계학술대회
    • /
    • pp.69-73
    • /
    • 1997
  • Microwave Plasma assisted CVD (Chemical Vapor Deposition) and DC Plasma CVD were used to prepare thin and thick diamond film, respectively. Diamond coated silicon nitride and fiee standing diamond thick film were eroded by silicon carbide particles. The velocity of the solid particle was about 220m/sec. Phase transformation and the other crack formation were investigated by using Raman spectroscopy and microscopy.

  • PDF

장방형 해분내의 세립 퇴적물 퇴적모형 (Modeling Sedimentation of Fine-grained Sediments in a Rectangular Basin)

  • Hyo Jin Kang
    • 한국해안해양공학회지
    • /
    • 제3권1호
    • /
    • pp.38-44
    • /
    • 1991
  • 간단한 box 모형이 장방형 해분에서의 세립 퇴적물의 퇴적현상을 설명하기 위하여 이용되었으며. 이 모형에 필요한 침식 및 퇴적률의 계수를 조사하여 남해안 가막양만에 적용하여 보았다. 해분이 외해와 연결되어 있고 외해의 부유퇴적물 농도가 일정하면 해분내에서 한 조석 주기 동안의 평균 부유퇴적물 농도는 일정한 값을 유지하게 되고 조류의 게류시 부근에는 퇴적이 일어나고 최대 유속시 부근에는 바닥 퇴적물의 재부유 및 침식이 일어나는 것을 보여주고 있다. 가막양만 처럼 퇴적이 우세한 해분에서는 조석 주기 중 퇴적이 일어나는 시간과 최대 퇴적률이 침식에 비하여 크게 나타나고 있으며, 이러한 퇴적 우세 해분의 부유퇴적물 평균농도는 외해의 부유퇴적물 농도보다 낮은 값을 보이고 있다. 또한. 조류의 유속변화에 따른 해분내기 부유퇴적물 농도변화는 고조의 약 한 시간 전에 최대값을 나타내고 저조의 약 한 시간 후에 최소값을 나타낸다.

  • PDF

해방 직후 항공사진을 이용한 강원도 해안선 변화 분석 (Analysis of Gangwon-do Coastline Changes Using Aerial Photograph Immediately after the Liberation)

  • 안승효;최현;김기홍
    • 한국산업융합학회 논문집
    • /
    • 제23권5호
    • /
    • pp.717-726
    • /
    • 2020
  • Social costs are increasing in Gangwon-do east coast due to coastal erosion. Long-term coastline change information is essential for analyzing this phenomenon. In this study, aerial photographs immediately after liberation are used for 1950's coastline extraction. The study area is from Sokcho Cheongho beach to Yangyang Seorak beach. The aerial photograph is geometrically corrected using DLT(Direct Linear Transformation) method to extract past coastline and compare it with present data. Coastal erosion and deposition areas are calculated in study area. Artificial structures such as harbors and breakwaters have caused changes in ocean currents and sediments from river estuaries. In most cases, the deposition occurred at the southern area of artificial structures and the erosion occurred on surrounding beaches. Coastline information extracted from past aerial photographs can be useful to provide information on long-term changes.