• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.106-111
• /
• 2016

Thermal noise generated in the electrolyte is modeled for the electrolyte-oxide-semiconductor field-effect transistors. Two noise sources contribute to output noise currents. One is the thermal noise generated in the bulk electrolyte region, and the other is the thermal noise from the double-layer region at the electrolyte-oxide interface. By employing two slightly-different equivalent circuits for two noise current sources, the power spectral density of output noise current is calculated. From the modeling and simulated results, the bulk electrolyte thermal noise dominates the double-layer thermal noise. Electrolyte thermal noise are computed for three different concentrations of NaCl electrolyte. The derived formulas give a good agreement with the published experimental data.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.8-18
• /
• 1997

In FPGAs, we may use the property of the routing architecture for their routing compared to the routing in the conventional layout style. Especially, the Xilinx XC4000 series FPGAs have very special routing architecture in which the routing problem is equivalent to the two dimensional track assignment problem. In this paper, we propose a new FPgA detailed routing method by developing a two dimensional trackassigment heuristic algorithm. The proposed routing mehtod accept a global routing result as an input and obtain a detailed routing such that the number of necessary wire segments in each connection block is minimized. For all benchmark circuits tested, our routing methd complete routing results. The number of used tracks are also similar to the results by thedirect routing methods.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.198-208
• /
• 1995

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. Test to detect stuck-open faults in BiCMOS circuit is important, since these faults do sequential behavior and are represented as transition faults. In this paper, proposes a method for efficiently detecting transistor stuck-open faults in BiCMOS circuit by transforming them into slow-to=rise transition and slow-to-fall transition. In proposed method, BiCMOS circuit is transformed into equivalent gate-level circuit by dividing it into pull-up part which make output 1, and pull-down part which make output 0. Stuck-open faults in transistor are modelled as transition fault in input line of gate level circuit which is transformed from given circuit. Faults are detceted by using pull-up part gate level circuit when expected value is '01', or using pull-down part gate level circuit when expected value is '10'. By this method, transistor stuck-open faults in BiCMOS circuit are easily detected using conventional gate level test generation algorithm for transition fault.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.165-168
• /
• 2001

This Paper presents the design method and performance characteristics of a dual band balun. The design method for dual balun is based on the lumped element eqiuvalent circuit of quater-wave transformaer. By employing the proposed configuration and the derived formulas, dual band balun are designed and simulated and manufactured. The proposed design method and equivalent circuit can make it easy to adapt to designing of ceramic multi-layer chip type dual band balun. The dual band will find applications in wireless communication circuits.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1601-1605
• /
• 2012

Three-phase voltage and current is applied to the three-phase alternating current motors which are commonly used in industry. Three phase variables of a, b, c are converted into d, q, 0 axis and the AC machines are modeled and analyzed. Basically the coordinate transformation or d-q transformation is used for convenience, a few steps are needed to analyze the motor performances - separating d and q components, establishing each equivalent circuit, and solving the differential equations of the circuits. In this study, a modeling technique of induction motor using complex vector is proposed and it can explain the induction motor physically. This method does not need the separating process of d and q components. With this technique, the model becomes simple, is easy to understand in physical, and can get the same results with those from the other models. These simulation results of the proposed model are compared with them for the conformation of the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.11-19
• /
• 2013

Very Fast Transients (VFT) originate mainly from disconnector switching operations in Gas Insulated Substations (GIS). In order to determine the rate-of-rise of Very Fast Transient Overvoltage (VFTO) in a 550 kV GIS, simulations are carried out using EMTP-RV. Each component of the GIS is modeled by distributed line model and lumped model based on equivalent circuits. The various switching conditions according to closing point-on-wave and trapped charge are simulated, and the results are analyzed. Also, the analysis of travelling wave using a lattice diagram is conducted to verify the simulation results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.876-881
• /
• 1998

The compensation strategy of shunt active power filters is one of the most important link that determine its compensation characteristics. In this paper, a new interpretation of the instantaneous reactive power theory in three-phase circuits was proposed. A compensation strategy (ip, iq mode) was introduced on the basis of the new interpretation. This compensation strategy was compared with other two compensation strategies(P, q mode and UPF mode). When source voltage is distorted, a sinusoidal, the three compensation strategies are equivalent to each other. When source voltage is distorted, a sinusoidal source current may result only by using ip, iq mode. This is the advantage of ip, iq mode. The result is verified by simulation.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2010

압전 변압기와 CCFL, 형광등의 전기적 등가회로에 의한 PSPICE 모델을 제시하였고, 차세대 35W급 초절전형 삼파장 T5 형광램프용 고효율 형광등 안정기를 개발하였다. 이 안정기는 역률개선회로와 인버터에 압전 변압기를 채용하여 T5 형광램프의 점등실험을 하였으며, 압전 변압기의 효율적인 구동과 정확한 주파수 공급을 위하여 PLL방식을 사용하였다.

• 대한전기학회논문지
• /
• 제33권9호
• /
• pp.355-363
• /
• 1984

An ideal and an approximate eauivalent circuits of a face-mounted PZT piezoelectric transformer were introduced from the equivalent circuit taking into account the mechanical loss of a PZT piezoelectric disk vibrator. And several expressions for the resonant frequencies and for the voltage ratios were derived from the approximate circuit of the transformer. From the experiments on the vltage ratios regarding the frequency variation without load and on the load variation at resonant frequency, it was found that the voltage ratio increased with the increase of load resistance and decreased sharply with the slight deviation from the resonant frequency, and that no-load voltage ratio at the resonant frequency was proportional to the product of the mechanical quality factor and the square of the electromechanical coupling factor of the vibrator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.364-368
• /
• 1999

This paper suggests switching regulator technique to overcome the drawback of conventional variable linear power supply. Switching regulator technique can eliminate the extremely lossy operation and reduce the size and weight of variable linear power supply and provide nearly constant output power over the majority of output voltage range. The topology of variable switched mode power supply is employed active clamp forward converter with a current doubler rectifier and by using control of variable-frequency together with control of fixed-frequency, output voltage can be controled. Equivalent circuits pertinent to each operational mode of converter are derived, and an experimental 20V, 50A converter was designed and built. The converter operates from an output voltage of zero to 25 V, under 100 kHz switching frequency.