• 한국지진공학회논문집
• /
• 제9권2호통권42호
• /
• pp.1-6
• /
• 2005

본 논문의 목적은 구조물의 지진응답제어를 위해 사용되는 MR 감쇠기의 성능을 선형화기법을 이용하여 등가의 선형 점성으로 표현하고, 이를 MR감쇠기가 설치된 축소건물에 대한 시스템식별 실험을 통해 얻은 결과와 비교하여, MR 감쇠기의 성능평가에 대한 선형화 기법의 타당성을 검증하는 것이다. 먼저, MR 감쇠기의 이력모델로 많이 사용되는 모델 중, 수학적 표현이 간단한 Bingham 모델에 등가선형화 기법을 적용하여 등가의 점성을 구하였다. 그리고, 진동대 가진실험을 통해 얻어진 MR감쇠기가 설치된 3층 소형구조물의 전달함수로부터 모드정보를 추출하고 이를 사용하여 구조물의 점성행렬을 구하였다. 선형화기법을 통해 Bingham 모델을 사용하여 예측된 점성과 실험을 통해 얻어진 MR감쇠기에 의해 증가된 점성은 5% 오차범위 이내로 일치된 결과를 보여준다.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.368-374
• /
• 2008

Multi-axial simulation table(MAST) is widely used in motor companies as the multi-axial excitor for vibration fatigue of target component, which provides the vibrational condition as close as the vehicle test. However, the vibration fatigue performance of target component can be guaranteed with MAST system only in case the input profile covers the required severity of the target component on field test. In this paper, the signal processing for multi-axial vibration fatigue test on vehicle component is presented, from the data acquisition of the target component to the derivation of input profile. To compare the severity of vibration condition between field and proving ground, the energy principle of a equivalent damage is proposed and then, it is determined the optimal combination of special events on proving ground using a sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• Structural Monitoring and Maintenance
• /
• 제3권2호
• /
• pp.175-194
• /
• 2016

Based on the change of traditional viscoelastic damper structure, a brand-new damper is designed to control simultaneously the translational vibration and the rotational vibration for platforms. Experimental study has been carried out on the mechanical properties of viscoelastic material and on its multi-dimensional seismic response control effect of viscoelastic damper. Three types of viscoelastic dampers with different shapes of viscoelastic material are designed to test the influence of excited frequency, strain amplitude and ambient temperature on the mechanical property parameters such as circular dissipation per unit, equivalent stiffness, loss factor and storage shear modulus. Then, shaking table tests are done on a group of single-storey platform systems containing one symmetric platform and three asymmetric platforms with different eccentric forms. Experimental results show that the simulation precision of the restoring force model is rather good for the shear deformation of viscoelastic damper and is also satisfied for the torsion deformation and combined deformations of viscoelastic damper. The shaking table tests have verified that the new-type viscoelastic damper is capable of mitigating the multi-dimensional seismic response of offshore platform.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제42권3호
• /
• pp.353-368
• /
• 2003

Analogy, based on a similarity, is to infer the properties of the similar object from properties of an object. It can be a very useful thinking tool for learning mathematical patterns and laws, noticing on relational properties among various situations. The purpose of this study, when manipulating hint condition, figure and table conditions and the amount of original learning by using algebra word problems, is to verify the effects of analogical transfer in solving equivalent, isomorphic and similar problems according to the similarity of source problems and target ones. Five study questions were set up for the above purpose. It was 354 first grade students of S and G middle schools in Seoul that were experimented for this study. The data was processed by MANOVA analysis of statistical program, SPSS 10.0. The results of this studies would indicate that most of the students would be poor at solving isomorphic and similar problems in the performance of analogical transfer according to the similarity of source and target problems. Hints, figure and table conditions did not facilitate the analogical transfer. Merely, on the condition that amount of teaming was increased, analogical transfer of the students was facilitated. Therefore, it is necessary to have students do much more analogical problem-solving experience to improve their analogical reasoning ability through the instruction program development in the educational fields.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.67-73
• /
• 2022

Industrial inverters are used in a variety of fields for electric power supply. They may be exposed to vibration and heat once they are installed. This study focused on a framework of accelerated life testing of an industrial inverter considering fatigue damage as the primary source of deterioration. Instead of analyzing detailed failure mechanisms and the product's vulnerability to them, the potential of fatigue failure is considered using the fatigue damage spectrum calculated from the environmental vibration signals. The acceleration and temperature data were gathered using field measurement and spectral analysis was conducted to calculate the vibration signal's power spectral density (PSD). The fatigue damage spectrum is then calculated from the input PSD data and is used to design an accelerated fatigue life testing. The PSD for the shaker table test is derived that has the equivalent fatigue damage to the original input signal. The tests were performed considering the combined effect of random vibration and elevated temperature, and the product passed all the planned tests. It was successfully demonstrated that the inverter used in this study could survive environmental vibration up to its guarantee period. The fatigue damage spectrum can effectively be used to design accelerated fatigue life testing.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.77-85
• /
• 1992

유사동적실험은 시험체에 대한 물리적인 실험에 이론적인 수치해석방법을 접목시킨 실험기법으로서, 특히 규모가 큰 시험체에 대하여 진동대실험 보다 효율적으로 지진응답실험을 수행할 수 있도록 최근에 개발된 방법이다. 본 연구에서는 유사동적실험 수행과정에서 발생하는 실험오차를 분석하여 실험결과를 보정함으로서, 내진성능실험을 위해서 유사동적실험기법을 광범위하게 적용할 수 있는 가능성을 제시하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.1-13
• /
• 2018

This paper deals with the NREL (National Renewable Energy Laboratory) 5-MW reference wind turbine. The controller which include MPPT (Maximum power point tracking) control algorithm and tower load reduction control algorithm was designed by MATLAB Simulink. This paper propose a tower damper algorithm to improve the existing tower damper algorithm. To improve the existing tower damper algorithm, proposed tower damper algorithm were applied the thrust sensitivity scheduling and PI control method. The thrust sensitivity scheduling was calculated by thrust force formula which include thrust coefficient table. Power and Tower root moment DEL (Damage Equivalent Load) was set as a performance index to verify the load reduction algorithm. The simulation were performed 600 seconds under the wind conditions of the NTM (Normal Turbulence Model), TI (Turbulence Intensity)16% and 12~25m/s average wind speed. The effect of the proposed tower damper algorithm is confirmed through PSD (Power Spectral Density). The proposed tower damper algorithm reduces the fore-aft moment DEL of the tower up to 6% than the existing tower damper algorithm.

• 한국지진공학회논문집
• /
• 제10권3호
• /
• pp.77-84
• /
• 2006

비보강 조적조는 비균일 재료로 이루어진 합성재료에 가까우므로 그 거동이 하중종류와 구조물의 손상 정도에 따라서 매우 달라지게 된다. 본 연구에서는 여러 차례의 모의 지진을 받는 구조물의 손상거동이 어떻게 전개되어 가는지 살펴보는 간단한 방법을 제시한다. 특히, 시간영역 자료를 여러 구간으로 나누어서 주파수가 어떻게 변화해 가는지 살펴보는 부분 FFT방법을 이용하였다. 또한, 주파수와 강도와의 관계식을 이용하여 단자유도계의 이선형모델도 유도하였다. 본 연구에서 제시하는 이러한 방법들을 이용하여 비보강 조적조의 비탄성 성질들을 합리적으로 구할 수 있었다.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.635-647
• /
• 2019

Tests and theoretical studies for seismic responses of a transmission tower-line system under coupled horizontal and tilt (CHT) ground motion were conducted. The method of obtaining the tilt component from seismic motion was based on comparisons from the Fourier spectrum of uncorrected seismic waves. The collected data were then applied in testing and theoretical analysis. Taking an actual transmission tower-line system as the prototype, shaking table tests of the scale model of a single transmission tower and towers-line systems under horizontal, tilt, and CHT ground motions were carried out. Dynamic equations under CHT ground motion were also derived. The additional P-∆ effect caused by tilt motion was considered as an equivalent horizontal lateral force, and it was added into the equations as the excitation. Test results were compared with the theoretical analysis and indicated some useful conclusions. First, the shaking table test results are consistent with the theoretical analysis from improved dynamic equations and proved its correctness. Second, the tilt component of ground motion has great influence on the seismic response of the transmission tower-line system, and the additional P-∆effect caused by the foundation tilt, not only increases the seismic response of the transmission tower-line system, but also leads to a remarkable asymmetric displacement effect. Third, for the tower-line system, transmission lines under ground motion weaken the horizontal displacement and acceleration responses of transmission towers. This weakening effect of transmission lines to the main structure, however, will be decreased with consideration of tilt component.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.55-62
• /
• 2017

Recently, there has been an increasing need for the sharing of microdata containing information regarding an individual entity. As microdata usually contains sensitive information on an individual, releasing it directly for public use may violate existing privacy requirements. Thus, to avoid the privacy problems that occur through the release of microdata for public use, extensive studies have been conducted in the area of privacy-preserving data publishing (PPDP). The k-anonymity algorithm, which is the most popular method, guarantees that, for each record, there are at least k-1 other records included in the released data that have the same values for a set of quasi-identifier attributes. Given an original table, the corresponding k-anonymous table is obtained by generalizing each record in the table into an indistinguishable group, called the equivalent class, by replacing the specific values of the quasi-identifier attributes with more general values. However, query processing over the anonymized data is a very challenging task, due to generalized attribute values. In particular, the problem becomes more challenging with an equi-join query (which is the most common type of query in data analysis tasks) over k-anonymous tables, since with the generalized attribute values, it is hard to determine whether two records can be joinable. Thus, to address this challenge, in this paper, we develop a novel scheme that is able to effectively perform an equi-join between k-anonymous tables. The experiment results show that, through the proposed method, significant gains in accuracy over using a naive scheme can be achieved.