• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1156-1161
• /
• 2008

Nonlinear dynamic analysis is generally used in automobile crash analysis and structural optimization considering crashworthiness uses the results of nonlinear dynamic analysis. Automobile crash optimization has high nonlinearity and difficulty in calculating sensitivity. Recently the equivalent static load (ESL) method has been proposed in order to overcome these difficulties. The ESL is the static load set generating the same displacement field as the nonlinear dynamic displacement field at each time step in dynamic analysis. From various researches regarding the ESL method, it has been proved that the ESL method is fairly useful. The ESL method can mathematically optimize a crash optimization problem through nonlinear analysis and well developed static optimization. The ESL is applied to nonlinear dynamic structural optimization of the automobile frontal impact problem. An automobile bumper is optimized. The mass of the structure is minimized while some constraints are satisfied.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2568-2580
• /
• 2000

This paper presents a quasi-static optimization technique for elastic structures under dynamic loads. An equivalent static load (ESL) set is defined as a static load set which generates the same displacement field as that from a dynamic load at a certain time. Multiple ESL sets calculated at every time step are employed to represent the various states of the structure under the dynamic load. They can cover every critical state that might happen at an arbitrary time. Continuous characteristics of dynamic load are simulated by multiple discontinuous ones of static loads. The calculated sets of ESLs are applied as a multiple loading condition in the optimization process. A design cycle is defined as a circulated process between an analysis domain and a design domain. Design cycles are repeated until a design converges. The analysis domain gives a loading condition necessary for the design domain. The design domain gives a new updated design to be verified by the analysis domain in the next design cycle. This iterative process is quite similar to that of the multidisciplinary optimization technique. Even though the global convergence cannot be guaranteed, the proposed technique makes it possible to optimize the structures under dynamic loads. It has also applicability, flexibility, and reliability.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1051-1060
• /
• 2005

Nonlinear Response Optimization using Equivalent Static Loads (NROESL) method/algorithm is proposed to perform optimization of non-linear response structures. The conventional method spends most of the total design time on nonlinear analysis. The NROESL algorithm makes the equivalent static load cases for each response and repeatedly performs linear response optimization and uses them as multiple loading conditions. The equivalent static loads are defined as the loads in the linear analysis, which generates the same response field as those in non-linear analysis. The algorithm is validated for the convergence and the optimality. The proposed algorithm is applied to a simple mathematical problem to verify the convergence and the optimality.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.585-594
• /
• 2006

The joined-wing is a new concept of the airplane wing. The fore-wing and the aft-wing are joined together in a joined-wing. The range and loiter are longer than those of a conventional wing. The joined-wing can lead to increased aerodynamic performance and reduction of the structural weight. In this research, dynamic response optimization of a joined-wing is carried out by using equivalent static loads. Equivalent static loads are made to generate the same displacement field as the one from dynamic loads at each time step of dynamic analysis. The gust loads are considered as critical loading conditions and they dynamically act on the structure of the aircraft. It is difficult to identify the exact gust load profile. Therefore, the dynamic loads are assumed to be (1-cosine) function. Static response optimization is performed for the two cases. One uses the same design variable definition as dynamic response optimization. The other uses the thicknesses of all elements as design variables. The results are compared.

• 한국전산구조공학회논문집
• /
• 제26권2호
• /
• pp.165-171
• /
• 2013

동하중을 고려하는 구조해석은 전산자원과 시간측면에서 상당한 어려움이 따르기 때문에 외력을 이상적인 정하중으로 가정하는 것이 일반적이다. 그러나 정하중 조건으로 해석된 결과는 구조물의 안전설계 측면에서 충분한 신뢰를 주기 어렵다. 최근에는, 동하중의 영향을 받는 구조물의 효과적인 구조해석을 위해 동하중을 등가정하중으로 변환하는 기법이 제안되어 왔다. 이 기법은 최적화를 통해 구속조건을 만족하는 최소의 등가정하중을 구하는데, 구속조건은 임계시간의 변위를 사용하고, 등가정하중 분포 자유도는 경험적으로 선정하여 왔다. 그러나 안전설계 관점에서는 응력 구속조건을 적용하는 것이 타당하며, 경험적 자유도 선정은 몇 개의 자유도에 과도한 하중이 부과되거나 구조물의 거동에 영향력이 없는 자유도들이 선정될 가능성이 있다. 본 연구에서는 등가응력 구속조건을 고려하는 등가정하중 최적화 방법을 제안하고, 축소시스템 개념을 도입한 주자유도, 구속조건 요소 자유도, 외부하중 자유도로 구성되는 등가정하중 분포 자유도의 구성방법을 제안한다. 수치예제에서는 제안된 방법으로 구해진 등가정하중을 사용하여 등가응력을 구하고 동하중 해석 결과와 비교함으로써 제안된 방법을 통한 구조해석 방법이 구조안전성 측면에서 타당함을 보인다.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1061-1069
• /
• 2005

In part I of this papter Nonlinear Response Optimization using Equivalent Static Loads (NROESL) method/algorithm is developed to conduct optimization for nonlinear behavior structures. The method/algorithm is also verified to show its convergency and optimality. In this present paper, the NROESL algorithm is applied to several structural problems with geometric and/or material nonlinearity. Conventional optimization with sensitivity analysis using the finite difference method is also applied to the same examples. The results of the optimizations are compared. The proposed method is very efficient and derives good solutions.