• 소성∙가공
• /
• 제10권2호
• /
• pp.91-100
• /
• 2001

A sectional FEA program is developed lot analyzing forming processes of sandwich sheets, which are intensively used recently as a lightweight material of an automobile body. The aluminum sandwich sheet consists of two aluminum skins and a polyprophylen core in between. The aluminum sandwich sheet is dominantly effected by the bending effects in small radius of curvature, so that an appropriate description of bending effects is required to analyze the forming processes. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the curvature of the tool and are added to the membrane stretch forces. To verify the validity of the developed program the sectional FEA results in stretch/draw forming Processes of a square cup and draw forming Processes of an outer hood panel were compared with the measurements.

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.711-717
• /
• 1999

Biaxial fracture behavior of alumina specimens with the diameter of 20mm and four kinds of thickness of 1.9, 2.3, 2.6 and 2.8mm was studied by the ball-on-3-ball test and the fracture results were analyzed by he analysis of variance (ANOCA), The strength measured with the down speed prescribed in ASTM showed that the measured strength was not dependent on the thickness of the specimens. Equivalent radius and crack-braching number were observed to increase lineraly with the thickness of the specimens. The jog direction was observed to study the effect of grinding direction on surface flaws. It is though that the surface finishing with #600 grit diamond wheel did not affect the surface flaws of the specimens.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (A)
• /
• pp.371-373
• /
• 2003

최근에 공공장소에서의 보다 안정적이고 고속의 무선 인터넷 접속에 대한 욕구가 커지면서 무선랜에 대한 수요가 많아지고 있고, 유무선 사업자들은 무선랜 시장을 선점하기 위해서 서비스를 서두르고 있다. 이와 같은 무선랜환경에서 안전하게 사용자를 인증하고 서비스를 제공하기 위한 표준으로 802.laa와 802.11i가 있다. 이와 같은 802.laa와 802.11i를 지원하는 액세스포인트를 위해서는 두 표준을 지원할 수 있는 라디우스 클라이언트가 필요하다. 본 논문에서는 위의 액세스포인트가 라디우스 프로토콜을 사용하여 무선단말 사용자를 인증시켜 주고 WEP(Wired Equivalent Privacy)을 위한 키를 교환할 수 있는 라디우스 클라이언트를 설계하고 구현하였다.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.191-199
• /
• 1999

In the continuous cutting process such as turning operation, chip control is thought very important to achieve the unmanned manufacturing system. The prediction of chip breakage under the given conditions is a substantial element for chip control. In this paper, a systematic approach to know the chip breaking region is represented under the concept of equivalent parameters. to Verify the suggested model, cutting experiments are executed with a commercial type and two other type chip breakers which have modified chip breaker parameters such as land width, groove width and nose radius. predicted chip breaking regions using the 3D cutting model agrees with those obtained from the experiments.

• 설비공학논문집
• /
• 제15권11호
• /
• pp.910-917
• /
• 2003

Fluid flow in a rectangular duct for 90$^{\circ}$ bend elbow with the ratio of 1.5 between its curvature radius and width is measured by 5 W laser doppler velocity meter. The fluid flow is also computed by commercial software of STAR-CD for comparison between measured and computed velocity profiles in the duct. Reynolds numbers for the comparison are 11,643, 19,746 and 24,260. From the comparison, computation of principal velocity components in the duct predicts the experimental data somewhat satisfactorily even though those of minor velocity components and turbulent kinetic energy do not match with the experimental data quite well. K-factor for the bend elbow is computed to be average 0.086 while the equivalent ASHRAE data is 0.07.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.17-22
• /
• 2021

The shape of the blank greatly affects the formability and quality of the product after the stamping process. In this study, the geometry of the B-Pillar blank in the stamping process was optimized using design of experiments. The geometry of the blank for the B-pillar was simplified with the two length values and two radius values. The effects of design variables were studied through the Design of experiments. The stamping process of the B-pillar was predicted with the Finite Element Analysis (FEA). The optimized blank geometry was obtained. It results in the reduced maximum equivalent plastic strain. The local necking and the wrinkling did not occurred with the optimized blank geometry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권7호
• /
• pp.2154-2168
• /
• 2022

Our work addresses the issues associated with usage of the semantic features by Bag of Words model, which requires construction of the dictionary. Extracting the relevant features and clustering them into code book or dictionary is computationally intensive and requires large storage area. Hence we propose to use a simple distribution of multiple shape based features, which is a mixture of gradients, radius and slope angles requiring very less computational cost and storage requirements but can serve as an equivalent image representative. The experimental work conducted on PASCAL VOC 2007 dataset exhibits marginally closer performance in terms of accuracy with the Bag of Word model using Self Organizing Map for clustering and very significant computational gain.

• Journal of Radiation Protection and Research
• /
• 제41권3호
• /
• pp.196-205
• /
• 2016

Background: The emergency planning zone (EPZ) of the city of Busan is divided into the precautionary actions zone (PAZ) and the urgent protective action planning zone; which have a 5-km radius and a 20-km to 21-km radius from the nuclear power plant site, respectively. In this study, we assumed that a severe accident occurred at Shin-Kori nuclear unit 3 and evaluated the dispersion speed of radiological material at each distance at various wind speeds, and estimated the effective dose equivalent and the evacuation time of PAZ residents with the goal of supporting off-site emergency action planning for the nuclear site. Materials and Methods: The total effective dose equivalent, which shows the effect of released radioactive materials on the residents, was evaluated using the RASCAL 4.2 program. In addition, a survey of 1,036 residents was performed using a standardized questionnaire, and the resident evacuation time according to road and distance was analyzed using the VISSIM 6.0 program. Results and Discussion: According to the results obtained using the VISSIM and RASCAL programs, it would take approximately 80 to 252.2 minutes for permanent residents to move out of the PAZ boundary, 40 to 197.2 minutes for students, 60 to 232.2 minutes for the infirm, such as elderly people and those in a nursing home or hospital, and 30 to 182.2 minutes for those temporarily within the area. Consequently, in the event of any delay in the evacuation, it is estimated that the residents would be exposed to up to $10mSv{\cdot}h^{-1}$ of radiation at the Exclusion Area Boundaries (EAB) boundary and $4-6mSv{\cdot}h^{-1}$ at the PAZ boundary. Conclusion: It was shown that the evacuation time for the residents is adequate in light of the time lapse from the initial moment of a severe accident to the radiation release. However, in order to minimize the evacuation time, it is necessary to maintain a system of close collaboration to avoid traffic congestion and spontaneous evacuation attempts.

• 지질공학
• /
• 제25권3호
• /
• pp.369-376
• /
• 2015

최근 국내에서 터널 내 지하수 유출량 산정을 위해 MODFLOW와 같은 지하수 수치모델이 많이 이용되고 있다. 수치 모델의 경우 격자망 설계가 터널 유출량 산정 결과에 큰 영향을 주는 것으로 알려져 있으나, 모델 설계 시 명확한 기준없이 연구자에 따라 임의의 크기로 격자망이 설정되어 왔다. 따라서 본 논문에서는 해석해와 수치해를 비교하는 방법을 통하여 격자의 크기가 수치모델의 유출량 산정 오차에 미치는 영향을 분석하였으며, 최적의 격자망 설정 방법을 제시하였다. 해석해와 수치해의 불일치는 부적절한 격자망 설정뿐만 아니라 모델 영역의 경계 효과에 의해서도 발생하는 것으로 나타났다. 따라서 수치모델의 경계 효과 성분을 제거한 후 격자의 크기가 터널 유출량 산정 오차에 미치는 영향을 분석하였으며, 결론적으로 정확한 유출량 산정 결과를 나타내는 터널 크기와 격자 크기의 관계식을 도출하였다. 도출된 관계식은 유한차분 수치모델에서 등가우물격자반경과 격자 크기와의 관계식과 동일한 것으로 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제16권2호
• /
• pp.165-170
• /
• 2016

곡면형 플라즈마 도파로에 기초한 나노 크기의 전력분배기가 다중모드 간섭 결합기의 특성을 이용하여 설계되었다. 플라즈마 곡면형 다중모드 간섭 결합기(PC-MMIC)의 적응 특성을 쉽게 분석하기 위하여 등각변환 해석법을 이용하여 곡면형 구조를 평면형 구조로 등가 변환하였다. 또한, 3D 전송구조의 전파특성과 최적의 설계변수를 선택하기 위하여 유효 유전체 방법과 종방향 모드 전송 선로 해석법을 적용하였다. 설계된 $2{\times}2$ PC-MMIC는 휘어진 구조에 기인하여 quasi-TM 모드에서는 PC-MMIC의 특성이 나타내지 않았으며, quasi-TE 모드의 경우 50%:50%의 비율로 출력되는 3dB 결합특성이 나타나지 않았다. 더욱이, 곡률 반경이 작은 부분 보다 큰 부분에서 입사된 신호가 더욱 좋은 결합특성을 나타내었다.