• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1084-1088
• /
• 1994

Electrical characteristics of Fe-substituted sodalites were analyzed and equivalent circuits of samples were designed using impedance and admittance data. Internal components of resistances (R$_e$, R$_b$, and R$_{gb}$) and capacitances (C$_b$, C$_dl$ and C$_D$) could be extracted by changing the frequency of measurement at three different temperatures. Upon increasing the temperature, electrical properties of the samples could be elucidated in detail by equivalent circuit. The substitution of Fe on Al site was indirectly confirmed by ESCA and the results explain the lower polarity in Na-O bond of Fe 10 mole ${\%}$-substituted sodalite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.5-8
• /
• 2004

We have investigated equivalent-circuit analysis of organic light-emitting diodes using frequency-dependent response of $ITO/Alq_3(60nm)/Al$ device at two different bias voltages. Complex impedance Z of the device was measured in the frequency range of 40Hz~1MHz. A Cole-Cole plot shows that there are two dielectric relaxations at the bias below turn-on voltage, and one relaxation at the bias above turn-on voltage. We are able to interpret the frequency-dependent response in terms of equivalent-circuit model of contact resistance $R_s$ in series with parallel combination of resistance $R_p$ and capacitance $C_p$. We have obtained contact resistance $R_s$ around $90{\Omega}$, mainly from the ITO anode.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.52-57
• /
• 2007

The control characteristics for radiant panel heating system with automatic thermostatic valves were researched by computer simulation and experiment. The unsteady energy analysis using equivalent R-C circuit method and radiation heat transfer analysis of enclosure analysis method with simple structured rooms was performed. The results of flow rate changes of the simulation study are good fit with the ones of experimental one.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.927-932
• /
• 2006

A simulation and experimental study for energy flow dynamics of floor radiant heating system were performed. The study was done under both environmental chamber and a house with several rooms. The unsteady energy analysis method using equivalent R-C circuit and radiation heat transfer analysis of enclosure analysis method with simple structured rooms were used for computer simulation. Also, first order dynamics with time delay in analyzing the return water was considered. The results of temperature changes of the simulation study are good fit with the ones of experimental one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.438-439
• /
• 2006

We have used ITO/$Alq_3$/Al structure to study complex impedance in $Alq_3$ based organic light emitting diode. Equivalent circuit was analyzed in a device structure of ITO/$Alq_3$/Al by varying the thickness of $Alq_3$ layer from 60 to 400nm. The impedance results can be fitted using equivalent circuit model of parallel combination resistance $R_p$ and capacitance $C_p$ with a small series resistance $R_s$.

• 한국전자파학회논문지
• /
• 제26권3호
• /
• pp.311-316
• /
• 2015

본 논문에서는 저항성 sheet를 이용한 광대역 박형 흡수체 설계법을 제안한다. 제안된 흡수체의 등가회로는 직렬 RLC 공진회로와 종단이 단락된 전송선으로 이루어진다. 이 등가회로를 바탕으로 임의의 설계주파수에서 흡수체가 ${\lambda}/4$보다 얇은 두께를 가지면서도, 광대역 흡수율 특성을 가지는 세가지 조건을 정리하였다. 수치해석을 통해 이를 동시에 만족하는 R, L, C 소자 값을 구했다. 구한 등가 R, L, C값은 특정한 chip 저항이나 표면저항을 가지는 십자 모양의 구조로써 구현이 가능하다. 이러한 설계법을 설계 중심주파수 3 GHz에서 적용해서 두께가 18.75 mm(전기적 길이 $67.5^{\circ}$)이고, 90 % 흡수율 기준으로 116 % 대역폭을 갖는 광대역 흡수체를 설계하였다.

• Journal of Computing Science and Engineering
• /
• 제8권3호
• /
• pp.129-136
• /
• 2014

This paper presents the equivalent circuit modelling and eigenfrequency analysis of a wideband robust capacitive radio frequency (RF) microelectromechanical system (MEMS) switch that was designed using Poly-Si and Au layer membrane for highly reliable switching operation. The circuit characterization includes the extraction of resistance, inductance, on and off state capacitance, and Q-factor. The first six eigenfrequencies are analyzed using a finite element modeler, and the equivalent modes are demonstrated. The switch is optimized for millimeter wave frequencies, which indicate excellent RF performance with isolation of more than 55 dB and a low insertion loss of 0.1 dB in the V-band. The designed switch actuates at 13.2 V. The R, L, C and Q-factor are simulated using Y-matrix data over a frequency sweep of 20-100 GHz. The proposed switch has various applications in satellite communication networks and can also be used for devices that will incorporate the upcoming IEEE Wi-Fi 802.11ad protocol.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.942-949
• /
• 2006

A lumped model is proposed to predict liquid ejection characteristics of a thermally driven inkjet print head. The model is based on a two-dimensional heat conduction equation, an empirical pressure-temperature equation and a nonlinear hydraulic flow-pressure equation. It has been simulated through the construction of an equivalent R-C circuit, and subsequently analyzed using SIMULINK and a circuit simulation tool, PLECS. Using the model, heating and cooling characteristics of the head are predicted to be in agreement with the IR temperature measurements. The effects of the head geometry on the drop ejection are also analyzed using the nonlinear hydraulic model. The present model can be used as a design tool for a better design of thermal inkjet print heads.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1276-1282
• /
• 2003

SMT 타입의 페라이트 비드(ferrite bead)는 전원단에서 발생되는 잡음(noise)이 회로 소자로 유입되는 것을 막기 위해 사용되는 소자로 병렬 캐패시터(capacitor)와 직렬 인덕터(inductor) 및 저항(resistor)을 이용하여 등가 모델화된다. 이와 같은 간단한 페라이트 비드의 등가 모델은 광대역 범위에서 측정 결과와 일치하지 않는다. 본 논문에서는 광대 역(50 MHz∼3 GHz)에서 정확한 페라이트 비드의 모델을 제시하고 페라이트 비드가 있을 때와 없을 때 전원단 잡음의 회로 소자에 미치는 영향을 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.180-182
• /
• 1995

The equivalent circuit of SLIM is composed of the circuit parameters. They can be obtained from the electromagnetic theory. The accelerating characteristics of SLIM are the best efficiency when synchronous speed changed continuously. The paper outlines a method of acceleration for an accelerated field system in which it is desired to reduce the overall length to a minimum, assuming a limit on the amount of heat which can be generated in the secondary member. The paper then shows that a primary unit designed to give several discrete field speeds only, as opposed to one with continuous speed variation, is not significantly inferior in performance to the latter but is much easier to manufacture.