• 제목/요약/키워드: Equivalent Impedance

검색결과 490건 처리시간 0.023초

Evaluation of Antioxidant Status and Correlation among Antioxidant Indices in Female College Students

  • Kim, Jung-Hee;Heajoon Ahn
    • Journal of Community Nutrition
    • /
    • 제5권1호
    • /
    • pp.13-20
    • /
    • 2003
  • This study was done to evaluate the antioxidant status of female college students by determining their intakes and plasma levels of antioxidnt vitamins (vitamin C, A and E) and total antioxidant status (TAS). Subjects were 46 healthy female college students aged 20 - 29 years. Body composition was determined by a multifrequency bioelectrical impedance analysis. Dietary intakes were examined by 24hr record method and nutrients intakes were analyzed by the Computer Aided Nutritional analysis program for professional (CAN-pro). Plasma vitamin C level were measured by spectrophotometric method and retinol, ${\beta}$-carotene, ${\alpha}$-tocopherol were measured by HPLC. Plasma TAS was measured with a Randox kit using the trolox equivalent antioxidant capacity (TEAC) method. Daily energy and protein intakes of the female college students were 1670.5㎉ (83% of RDA) and 63.3g (115.1% of RDA), respectively. However their intakes of Ca and Fe were below 75% of RDA. Their intakes of vitamin A and C were 596.6 ${\mu}$ gRE (85.2% of RDA) and 71.0mg (101.4% of RDA), respectively. Plasma levels of vitamin C, retinol, ${\beta}$-carotene and ${\alpha}$-tocopherol were 14.7mg/L, 0.7mg/L, 0.2mg/L and 9.1mg/L, respectively which were within normal range. There was no subject with deficiency or marginal level in plasma vitamin A and C. However 1.6% of the subjects had below adequate level in vitamin E. Plasma TAS level was 1.2mmol/L. Correlation data showed that all plasma antioxidant vitamins were positively correlated with plasma TAS. Overall data indicate that the antioxidant status of female college students were pretty good. However it might be necessary to educate them to eat more fruits and vegetables for preventing many chronic diseases in a later life. (J Community Nutrition 5(1) : 13∼20, 2003)

적분방정식을 이용한 3차원 지자기 지전류 모델링 (Three-Dimensional Magnetotelluric Modeling Using Integral Equations)

  • 김희준;이동성
    • 자원환경지질
    • /
    • 제27권2호
    • /
    • pp.191-199
    • /
    • 1994
  • 층상대지속에 있는 3차원 물체에 의한 지자기 지전류 (MT)응답을 계산하기 위하여 적분방정식을 이용한 수치모델링법을 개발하였다. 이 방법에서는 3차원 이상체를 몇 개의 세포로 분할하여 펄스기조함수로 근사할 수 있는 전류분포로 치환한다. 층상대지를 표현하는 전기 텐서그린함수를 쓰면 행렬방정식을 유도할 수 있으며 이를 각 세포의 벡터전류에 대하여 푼다. 결국 미지의 산란장은 산란전류에 관한 전기 및 자기 텐서그린함수를 적분함으로써 얻어진다. 지표면 근처에 3차원 전도성물체가 존재할 때 2차원의 TE모드 모델링으로는 깊은 곳에 가짜의 저 비저항을 가정해야 한다. 이는 TE모드 모델링에서는 경계면 전하의 영향을 고려할 수 없기 때문이다. 그러나 긴 3차원 직방체의 가운데를 가로지르는 단연은 2차원 TM모드 아르고리즘으로 정확히 모델화할 수 있으며, 이는 정식화과정에서 경계면 전하가 고려되어 있기 때문이다. 다중 주파수에 관한 수치계산 결과 겉보기 비저항과 위상은 상호보완적인 변수라는 것이 밝혀졌다. 따라서 이들 변수는 주파수영역 MT 해석시 함께 취급되는 것이 바람직하다.

  • PDF

알루미나 기판상에 구현된 0.6mAh급 전고상 박막전지 (0.6 mAh All-Solid-State Thin Fim Battery Fabricated on Alumina Substrate)

  • 박호영;남상철;임영창;최규길;이기창;박기백;조성백
    • 전기화학회지
    • /
    • 제8권4호
    • /
    • pp.181-185
    • /
    • 2005
  • 알루미나 기판을 사용하여 백금 박막 전류 집전체상에 $2.9{\mu}m$ 두께 및 $4cm^2$의 전극면적을 갖는 $LiCoO_2$ 박막을 R.F. 마그네트론 스퍼터링법에 의해 증착하였으며, 아르곤 공정 압력 및 인가된 R.F. 전력량에 따른 Li/Co 몰 비 의존성에 대해 고찰하였다. 비정질계 고체전해질인 Lipon 및 Li 음극이 순차적으로 증착된 박막전지를 제조하여 정전류충, 방전 시험하였으며, 고율방전 특성 및 충, 방전 횟수에 따른 전지 용량 변화를 측정하였다. 교류임피던스를 통해 전지내부의 저항성분을 측정하였으며, 이에 대한 등가회로를 구성하여 시뮬레이션한 결과와 비교하였다.

Physical Activity in Adolescence Has a Positive Effect on Bone Mineral Density in Young Men

  • Kim, Jinhyun;Jung, Moonki;Hong, Yeon-Pyo;Park, Jung-Duck;Choi, Byung-Sun
    • Journal of Preventive Medicine and Public Health
    • /
    • 제46권2호
    • /
    • pp.89-95
    • /
    • 2013
  • Objectives: Little is yet known about the determinants of bone mineral density (BMD) in young adults. Thus, in this study, we aimed to determine the factors that have an impact on BMD in young men. Methods: Questionnaires were sent out to 111 male medical students. Information on age, socio-economic status, medical history, lifestyle, physical activity during adolescence, school club participation, current physical activity, and dietary intake were collected by the survey. Height, weight, percent body fat and muscle mass were estimated by bioelectrical impedance, and BMD was obtained using calcaneal quantitative ultrasound. Using the Poisson regression model, prevalence ratios (PRs) were used to estimate the degree of association between risk factors and osteopenia. Results: The height and current physical activity showed a correlation to the Osteoporosis Index. Among the categorized variables, past physical activity during adolescence (p= 0.002) showed a positive effect on the bone mineral content. In the multivariate model, past physical activity (${\geq}1$ time/wk) had a protective effect on osteopenia (PR, 0.37; 95% confidence interval [CI], 0.18 to 0.75) and present physical activity (1000 metabolic equivalent of task-min/wk) decreased the risk of osteopenia (PR, 0.64; 95% CI, 0.44 to 0.91). Conclusions: Past physical activity during adolescence is as important as physical activity in the present for BMD in young men.

활성탄의 후 처리에 의한 EDLC 전극재의 전기화학 성능 개선 (Electrochemical Performance of Activated Carbon Electrode Materials with Various Post Treatments for EDLC)

  • 이은지;권순형;최푸름;정지철;김명수
    • 한국재료학회지
    • /
    • 제24권6호
    • /
    • pp.285-292
    • /
    • 2014
  • Commercial activated-carbon used as the electrode material of an electric double-layer capacitor (EDLC) was posttreated with various acids and alkalis to increase its capacitance. The carbon samples prepared were then heat-treated in order to control the amount of acidic functional groups formed by the acid treatments. Coin-type EDLC cells with two symmetric carbon electrodes were assembled using the prepared carbon materials and an organic electrolyte. The electrochemical performance of the EDLC was measured by galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy. Among the various activated carbons, the carbon electrodes (CSsb800) prepared by the treatments of coconutshell-based carbon activated with NaOH and $H_3BO_5$, and then heat treated at $800^{\circ}C$ under a flow of nitrogen gas, showed relatively good electrochemical performance. Although the specific-surface-area of the carbon-electrode material ($1,096m^2/g$) was less than that of pristine activated-carbon ($1,122m^2/g$), the meso-pore volume increased after the combined chemical and heat treatments. The specific capacitance of the EDLC increased from 59.6 to 74.8 F/g (26%) after those post treatments. The equivalent series resistance of EDLC using CSsb800 as electrode was much lower than that of EDLC using pristine activated carbon. Therefore, CSsb800 exhibited superior electrochemical performance at high scan rates due to its low internal resistance.

파이버 레이저 투명 전극 식각을 통한 염료감응형 태양전지 효율 상승 연구 (A Study on the Improvement of the Dye-sensitized Solar Cell by the Fiber Laser Transparent Conductive Electrode Scribing Technology)

  • 손민규;서현웅;신인영;김진경;최진호;최석원;김희제
    • 전기학회논문지
    • /
    • 제59권12호
    • /
    • pp.2218-2224
    • /
    • 2010
  • Dye-sensitized solar cell (DSC) is a promising alternative solar cell to the conventional silicon solar cell due to several advantages. Development of large scale module is necessary to commercialize the DSC in the near future. A scribing technology of the transparent conductive oxide (TCO) is one of the important technologies on the fabrication of DSC module. A quality of the scribed line on the TCO has a decisive effect on the efficiency of DSC module. Among several scribing technologies, the fiber laser is a suitable for scribing the TCO more precisely and accurately because of their own characteristics. In this study, we try to improve the quality of the TCO scribed line by using the fiber laser. Consequently, the operating parameter of fiber laser is optimized to get the TCO scribed line with good quality. And the fiber laser scribing technology of the TCO is applied to the fabrication of the DSC with optimal operating parameter, operating current 3900mA. As a result, the current density and fill factor are improved and the total efficiency is increased because the internal resistances of DSC such as TCO sheet resistance and the resistance concerned to the electron movement in the $TiO_2$ are reduced. This is analyzed by the electrochemistry impedance spectroscopy (EIS) and the equivalent circuit model of the DSC.

벅-부스트 형 태양전력 조절기의 디지털 제어 (Digital Control for BUCK-BOOST Type Solar Array Regulator)

  • 양정환;윤석택;박성우
    • 한국위성정보통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.135-139
    • /
    • 2012
  • 디지털 제어기를 사용하면 태양전력 조절기의 전력변환 시 아날로그 회로로 구현이 불가능한 전력변환 제어 기법을 적용할 수 있으며 태양전력 조절기의 복잡한 운용 알고리즘을 구현할 수 있다. 디지털 제어기를 사용하여 태양전력 조절기의 입력 등가 임피던스를 저항 특성을 가지도록 정저항 제어하면 단일 정저항 제어기만으로 태양전력 조절기의 전류를 제어를 할 수 있다. 한편, 태양전지는 전압원 영역에서 저항이 큰 폭으로 변하며, 전류원 영역에서 작은 폭으로 변한다. 따라서 태양전력 조절기를 정저항 제어기로 제어하는 경우, 이러한 태양전지의 특성에 적합한 가변 진폭 최대 전력점 추적 기법을 적용하는 것이 유리하다. 그러나 가변 진폭 최대 전력점 추적은 태양전지의 대신호 저항과 소신호 저항을 이용하므로 태양전지가 출력하는 전력량을 계산하여 제한할 수 없다. 본 논문에서는 디지털 제어기를 사용하여 태양전지가 생성하는 최대 전력을 제한하는 운용 알고리즘을 제안하고 모의실험을 통해 디지털 제어기로 제어되는 태양전력 조절기를 검증한다.

Cardiac Response to Head-Out Water Immersion in Man

  • Choi, Jang-Kyu;Park, Won-Kun
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제4권3호
    • /
    • pp.253-261
    • /
    • 2000
  • Head-out water immersion induces marked increase in the cardiac stroke volume. The present study was undertaken to characterize the stroke volume change by analyzing the aortic blood flow and left ventricular systolic time intervals. Ten men rested on a siting position in the air and in the water at $34.5^{circ}C$ for 30 min each. Their stroke volume, heart rate, ventricular systolic time intervals, and aortic blood flow indices were assessed by impedance cardiography. During immersion, the stroke volume increased 56%, with a slight (4%) decrease in heart rate, thus cardiac output increased ${\sim}50%.$ The slight increase in R-R interval was due to an equivalent increase in the systolic and diastolic time intervals. The ventricular ejection time was 20% increased, and this was mainly due to a decrease in pre-ejection period (28%). The mean arterial pressure increased 5 mmHg, indicating that the cardiac afterload was slightly elevated by immersion. The left ventricular end-diastolic volume index increased 24%, indicating that the cardiac preload was markedly elevated during immersion. The mean velocity and the indices of peak velocity and peak acceleration of aortic blood flow were all increased by ${\sim}30%,$ indicating that the left ventricular contractile force was enhanced by immersion. These results suggest that the increase in stroke volume during immersion is characterized by an increase in ventricular ejection time and aortic blood flow velocity, which may be primarily attributed to the increased cardiac preload and the muscle length-dependent increase in myocardial contractile force.

  • PDF

유체기계 덕트 내 시변 음원의 음향 특성에 관한 연구 (An Analysis of the Acoustical Source Characteristics in the Time-varying Fluid Machines)

  • 장승호;이준신;이정권
    • 한국음향학회지
    • /
    • 제22권2호
    • /
    • pp.104-112
    • /
    • 2003
  • 유체기계 덕트 내 음원은 흔히 선형 시불변 모델을 이용하여 음원 임피던스와 강도로 특성화되어진다. 그러나 내연기관 및 압축기 음원에 대한 여러 측정에서 물리적으로 타당하지 않은 부의 저항이 보고된 바 있다. 본 논문에서는 유체기계의 시변성이 음원특성에 미치는 영향에 대하여 해석적으로 연구하였다. 이를 위하여 왕복동 피스톤 및 배기계로 구성된 간단한 유체기계를 전형적인 주기적으로 시변하는 계로서 다루었으며 등가음향 회로를 해석하였다. 해석 해를 이용한 모사측정에서는 실제 음원의 시변성이 부의 저항에 대한 주요한 원인임을 볼 수 있다. 비교적 작은 시변항의 크기를 가지는 경우에 피스톤이 정적 계의 고유진동수의 두 배 또는 그 정수로 나뉜 주파수로 작동한다면 음원이 큰 음향 파워를 방사하게 됨을 알 수 있다.

측정된 S-파라메터를 이용한 EMI 필터의 Y-캡 용량 산정에 대한 연구 (Evaluation of Y-Cap Capacitance in EMI Filter Design Using Measured S-Parameter)

  • 김종현;전지운;김태호;김성준;나완수
    • 한국전자파학회논문지
    • /
    • 제25권3호
    • /
    • pp.319-332
    • /
    • 2014
  • 삽입 손실은 EMI 필터의 노이즈 제거 성능을 나타내는 주된 지표로 쓰인다. 본 논문에서는 기존의 방법보다 좀 더 정확하고 편하게 삽입 손실을 측정할 수 있는 방법에 대하여 연구하였다. 이와 관련하여 EMI 필터의 비이상적인 특성들을 모두 고려하기 위해 4포트 S-파라메터 측정을 통한 임의의 전원/부하 임피던스에 대한 차동 모드와 공통 모드의 삽입 손실을 구하는 방법에 대하여 제시하였다. 이를 활용하여 EMI 필터가 사용될 회로의 전원/부하 임피던스를 알고 있을 때, 시스템에 적용된 EMI 필터의 차동 모드 삽입 손실과 공통 모드 삽입 손실를 구할 수 있다. 또한, 이를 바탕으로 적절한 소자 값을 선택하기 위해 혼합 모드 변환, 체인 혼합 모드 변환 그리고 4포트 모델링을 통하여 임의의 소자 값에 따른 전체 시스템의 삽입 손실을 예측하는 방법에 대하여 제시하였다.