• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.417-424
• /
• 2010

격리장치로서 적층고무받침의 동적 특성은 고무 열 노화로 인한 미세 구조의 변화로 인해 악화 될 수 있다. 그 결과, 예기치 못한 지진의 발생으로 교량이나 건물들은 치명적이 손상을 입게 된다. 여기서, 적층 고무받침의 동적특성은 압축-전단하중 및 반복하중, 극한파괴시험은 열 노화 전 후에 시험하여 상호 비교하였다. 실험 결과, 적층고무받침에서의 열 노화 현상은 전단강성과 에너지의 감쇠 그리고 등가감소계수에 영향이 있음을 알 수 있었다. 이것은 적층고무받침의 열 노화에 의한 동적특성의 저하를 의미하고, 적층고무받침 설계시 고려해야할 필요가 있다고 판단된다.

• Tribology and Lubricants
• /
• 제23권3호
• /
• pp.123-129
• /
• 2007

This paper presents a theoretical model for the analysis of double-bumped AFBs. The stiffness and damping coefficients of the double bump vary depending on the external load and its friction coefficient. In the case of a lightly loaded condition where only the upper bump contributes to deformation, the double bump is in the single active region. In the case of a heavily loaded condition where both the upper and lower bumps contribute to deformation, the double bump is in the double active region. So the double bump can be either in the single or double active region depending on vertical deflection. The equivalent stiffness and damping coefficients of the bump system are derived from the vertical and horizontal deflection of the bump, including the friction effect. A static and dynamic performance analysis is carried out by using the finite difference method and the perturbation technique. The results of the performance analysis for a double-bumped AFB are compared with those obtained for a single-bumped AFB. This paper successfully proves that a double bumped AFB has higher load capacity, stiffness, and damping than a single-bumped AFB in a heavily loaded condition.

• Structural Engineering and Mechanics
• /
• 제11권3호
• /
• pp.273-286
• /
• 2001

Viscoelastic (VE) dampers have shown to be capable of providing structures with considerable additional damping to reduce the dynamic response of structures. However, the VE material appears to be sensitive to the variations in ambient temperature and vibration frequency. To minimize these effects, a new VE material has been developed. This new material shows less sensitivity to variations in vibration frequency and temperature. However, it is highly dependent on the shear strain. Experimental studies on the seismic behavior of a 2/5 scale five-story steel frame with these new VE dampers have been carried out. Test results show that the structural response can be effectively reduced due to the added stiffness and damping provided by the new type of VE dampers under both mild and strong earthquake ground motions. In addition, analytical studies have been carried out to describe the strain-dependent behavior of the VE damper. The dynamic properties and hysteresis behavior of the dampers can be simulated by a simple bilinear model based on the equivalent dissipated energy principle proposed in this study.

• 비파괴검사학회지
• /
• 제31권3호
• /
• pp.233-245
• /
• 2011

A new BWIM(bridge weigh-in-motion) algorithm using both measured strain and acceleration data is proposed. To consider the effects of bridge vibration on the estimation of moving loads, the dynamic governing equation is applied with the known stiffness and mass properties but damping is ignored. Dynamic displacements are computed indirectly from the measured strains using the beam theory and accelerations are measured directly by accelerometers. To convert a unit moving load to its equivalent nodal force, a transformation matrix is determined. The incompleteness in the measured responses is considered in developing the algorithm. To examine the proposed BWIM algorithm, simulation studies, laboratory experiments and field tests were carried. In the simulation study, effects of measurement noise and estimation error in the vehicle speed on the results were investigated.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.555-563
• /
• 2001

Support dynamics are often important in rotordynamic analyses. It may well happen in real situation of machines such as centrifugal pumps or turbines operating on flexible structure. This paper presents the applications of the impedance coupling method and the improved rotor model for including the support effects on the interaction with the rotor. The impedance coupling techniques are based on the FRFs of each substructure. Its dynamic stiffness matrix can be assembled to generate the system matrix, which satisfy the constraint conditions in the connection coordinates. And, the improved rotor uses the simplified spring-mass models as support properties. The equivalent support models are directly incorporated into the finite element rotor model. To verify the suggested analytical procedures, the results are compared to those of the pump system.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.47-51
• /
• 2005

If a structure is founded on the ground saturated with pore water, then the ground should be modeled as a saturated two-phase porous medium for accurate earthquake response analysis. In this study, an axisymmetric transmitting boundary hyperelement is developed for modeling of far field of the ground using u-U formulation for water-saturated transversely isotropic layered stratum. The developed hyperelement is verified by comparing the dynamic stiffness of rigid circular foundation on water-saturated isotropic layered stratum with the case of using equivalent single-phase medium model.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.345-350
• /
• 2006

If a structure is founded on the ground saturated with pore water, then the ground should be modeled as a saturated two-phase porous medium for accurate earthquake response analysis. In this study, a 3-dimensional transmitting boundary is developed for modeling of far field using u-U formulation for water-saturated transversely isotropic layered stratum. The developed transmitting boundary is verified by comparing the dynamic stiffness of rigid square foundation on water-saturated isotropic layered stratum with the case of using equivalent single-phase medium model.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.447-470
• /
• 2014

Numerical simulation of the non-linear behavior of (RC) structural walls subjected to severe earthquake ground motions requires a reliable modeling approach that includes important material characteristics and behavioral response features. The objective of this paper is to optimize a simplified method for the assessment of the seismic response and damage development analyses of an RC structural wall building using macro-element model. The first stage of this study investigates effectiveness and ability of the macro-element model in predicting the flexural nonlinear response of the specimen based on previous experimental test results conducted in UCLA. The sensitivity of the predicted wall responses to changes in model parameters is also assessed. The macro-element model is next used to examine the dynamic behavior of the structural wall building-all the way from elastic behavior to global instability, by applying an approximate Incremental Dynamic Analysis (IDA), based on Uncoupled Modal Response History Analysis (UMRHA), setting up nonlinear single degree of freedom systems. Finally, the identification of the global stiffness decrease as a function of a damage variable is carried out by means of this simplified methodology. Responses are compared at various locations on the structural wall by conducting static and dynamic pushover analyses for accurate estimation of seismic performance of the structure using macro-element model. Results obtained with the numerical model for rectangular wall cross sections compare favorably with experimental responses for flexural capacity, stiffness, and deformability. Overall, the model is qualified for safety assessment and design of earthquake resistant structures with structural walls.

• Tribology and Lubricants
• /
• 제40권1호
• /
• pp.8-16
• /
• 2024

This study conducts numerical modeling and eigen-analysis of a rod-fastened rotor, which is mainly used in aircraft gas turbine engines in which multiple disks are in contact through curvic coupling. Nayak's theory is adopted to calculate surface parameters measured from the tooth profile of the curvic coupling gear. Surface parameters are important design parameters for predicting the stiffness between contact surfaces. Based on the calculated surface parameters, elastoplastic contact analysis is performed according to the interference between two surfaces based on the Greenwood-Williamson model. The equivalent bending stiffness is predicted based on the shape and elastoplastic contact stiffness of the curvic coupling. An equation of motion of the rod-fastened rotor, including the bending stiffness of the curvic coupling, is developed. Methods for applying the bending stiffness of a curvic coupling to the equation of motion and for modeling the equation of motion of a rotor that includes both inner and outer rotors are introduced. Rotordynamic analysis is performed through one-dimensional finite element analysis, and each element is modeled based on Timoshenko beam theory. Changes in bending stiffness and the resultant critical speed change in accordance with the rod fastening force are predicted, and the corresponding mode shapes are analyzed.

• 한국지진공학회논문집
• /
• 제12권3호
• /
• pp.11-20
• /
• 2008

본 연구에서는 저경도 고감쇠 고무받침 시험체의 다양한 특성실험을 통하여 저경도 고감쇠 고무받침의 특성을 파악하였다. 고무받침의 파악하고자 하는 특성은 압축강성, 전단강성, 등가감쇠비, 전단특성의 변형율 의존성, 전단특성의 면압 의존성, 전단특성의 주파수 의존성, 전단특성의 온도 의존성, 극한전단특성 등이다. 특성실험은 ISO 22762-1에 따라 수행하였으며, ISO 2276-3에 따라 평가하였다. 특성실험결과 전단강성은 전단변형율과 온도 의존성이 큰 것으로 나타났고, 등가감쇠비는 면압 의존성이 큰 것으로 나타났다. 전단특성의 주파수 의존성 실험결과 0.1Hz를 기준으로 경향이 나뉘는 것으로 나타났다. 0.1Hz 이상에서는 전단특성의 변화가 적었지만, 0.1Hz 이하에서는 전단강성과 등가감쇠비 모두 급격히 감소하는 것으로 나타났다. 추가적으로 크리프실험과 극한전단특성실험을 수행하였고, 실험결과는 ISO 22762-3의 요구사항을 만족하는 것으로 나타났다.