• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.74-75
• /
• 2017

The operations of the warehouses are labor intensive. Automation of the warehouse is made by efforts to shorten the work time and reduce the cost according to the change of the production form of the company and the buyer's demand. Storage warehouses vary in size and shape, and equipment and facilities used in storage warehouses vary according to purpose and use. In order to automate storage, it is necessary to introduce an operating system, which varies depending on the type of equipment and operation policy. In this paper, we review the requirements for the automation of small and medium-sized storage warehouses, and classify the equipment selection and operating system options into effective scenarios to introduce an effective automation system. Therefore, simulation is performed for each scenario, and the effect of automation is examined, and the effect of automation is verified through economic analysis through cost for automation introduction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1929-1943
• /
• 2021

Millimeter wave (mmWave) communication based on the wide bandwidth of >28 GHz is one of the key technologies for cellular-connected unmanned aerial vehicles (UAVs). The selection of mmWave beams in such cellular-connected UAVs is challenging and critical, especially when downlink transmissions toward aerial user equipment (UE) suffer from poor signal-to-interference-plus-noise ratio (SINR) more often than their terrestrial counterparts. This study proposed a coordinated mmWave beam selection scheme using fingerprint for cellular-connected UAV. The scheme comprises fingerprint database configuration and coordinated beam selection. In the fingerprint database configuration, the best beam index from the serving cell and interference beam indexes from neighboring cells are stored. In the coordinated beam selection, the best and interference beams are determined using the fingerprint database information instead of performing an exhaustive search, and the coordinated beam transmission improves the SINR for aerial UEs. System-level simulations assess the UAV effect based on the third-generation partnership project-new radio mmWave and UAV channel models. Simulation results show that the proposed scheme can reduce the overhead of exhaustive search and improve the SINR and spectral efficiency.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.26-34
• /
• 2014

Highway construction is a combination of linear, repetitive, and highly equipment intensive operations. Various types of construction equipment are deployed to ensure undisrupted performance of construction, and thus productivity improvement and cost-saving can be achieved through well-thought-out planning. The selection of construction equipment is dependent upon construction sequence, site conditions, and construction methods. In the process of planning, management should consider various types of construction methods per each type of construction operation. Also, management should map out proper construction equipment operation plan that takes the construction duration and cost measures into consideration. However, limited availability of historic data from the similar types of operations has been a stumbling block to proper construction planning, making the operations performed based upon experience and intuition guided by rules-of-thumb. As a consequence, the planing phase rarely provided an adequate validity in the implementation phase. The researchers developed a process logic for each construction type that management can utilize from early phase of highway construction planning process. Moreover, derived the construction equipment combination optimized for efficiency by using the process simulation technique. The developed method is expected to be useful for the decision-making process that aims to evaluate efficiency of various process plans and to ensure optimal selection of construction equipment for highway construction projects.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.87-96
• /
• 2019

Recently, with the rapid development of video equipment and technology, tremendous video information is produced and utilized in military domain to acquire battlefield information or for effective command control. Note that the video playback devices currently used in the military domain ranges from low-performance tactical multi-functional terminals (TMFT) to high-performance video servers and the networks where the video information is transmitted also range from the low speed tactical information and communication network (TICN) to ultra-high speed defense broadband converged networks such as M-BcN. Therefore, there is a need for an efficient streaming technique that can efficiently transmit defense video information in heterogeneous communication equipment and network environments. To solve the problem, this paper proposes a Scalable Video Coding (SVC) and balanced selection algorithm based Peer-to-Peer (P2P) streaming technique and the feasibility of the proposed technique is verified by simulations. The simulation results based on our BitTorrent simulator show that the proposed balanced selection scheme outperforms the sequential or rarest selection algorithm.

• Plant Journal
• /
• v.9 no.4
• /
• pp.37-42
• /
• 2013

Power plants have many components and equipment. It is difficult for operators to know the each equipment fails or what equipment fails. It is important to prevent failure in advance. Recently, outlook of maintenance tasks is changing from time based maintenance to condition based maintenance. In this study, we selected RCM-based maintenance intervals for coal handling equipment at coal power plant. For RCM analysis, we have made great progress in a maintenance task and interval. If we apply RCM analysis to the whole plant system, we can expect qualitative improvement and efficient operation of power plant system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1220-1227
• /
• 2018

Avionics electronic equipment refers to the electronic equipment installed on an aircraft. Failure of avionics equipment can have a significant impact on aircraft operations as well as threaten the safety of pilots and passengers. Therefore, avionics electronic equipment is required to have higher reliability and safety than electronic equipment used for other purposes. Avionics equipment must consider various component selection and system design to meet reliability and safety-related requirements from the initial design stage. In this paper, we describe safety, reliability performance analysis method of avionics equipment, and introduce various design improvement methods that can be performed to meet safety requirement performance. Finally, the safety performance of the improved avionics equipment was reanalyzed and compared with the value before the improvement, the validity of the proposed design change was verified.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1376-1378
• /
• 2002

Compare and examined Full Auto Line of PV module Manufacture Equipment and PV module Manufacture Equipment in the Korea. Full Auto Line has been constructed with Cell Selection. Tabbing & Stringing. Module Setting, Lamination, Curing and Module Testing, and Module Manufacture Line in the Korea has been constructed with Tabbing & Stringing. Module Setting, Lamination and Module Testing. Laminator's temperature Control is the most important Variable in Manufacture of PV module. Temperature Transformation of Center part of PV module is most high at Lamination, and Edge part is most low.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2018

This research aimed to identify walking trails' purpose of its use and the factors that influence the selection. For this, a survey targeting the walking trail users was conducted in 2016 to question the research aim stated above. The mean number of walking trail usage in a month was 2.51 times and the duration of use ranged from one to ten hours, with the average of 2.5 hours. The main reason for the usage was to maintain physical health and the following was for mental relaxation, thus showing more than 90% of the people concerned with physical and mental health. Walking trails near the residences had the greatest percentage and trails that include mountains, rivers, seas and lakes were the following. Trails near historical locations or countryside showed a lower percentage. The choices showed relevance to the proximity as a standard of selection. The next highest percentage was the convenience of transportation. Additionally, people that access the trails three or more times were inclined to be influenced by the installation of exercising equipment. The aspect of facilities showed that the place for relaxation was a significant selection factor such as bathrooms for 20s to 30s and exercising equipments for people older than 50. To access the walking trails, people reach it by automobiles, public transport, walking and bicycles and out of these, automobiles had the highest percentage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.163-172
• /
• 2012

In this study, It is assumed that customers are both usage unit of spare parts and stores of displaying and selling the goods that are installation unit of having the spare parts. The demand pattern through the effective order of spare parts and issue list in installation unit is investigated based on the assumption. Current ASL (Authorized Stockage List) selection of the army has been conducted in the way of using the analysis result of real usage experiences on spare parts used during the Korea War. For this study, ASL selection criteria and procedures based on army regulations and field manuals are specified. Since the traditional method does not presents the association analysis on spare parts used for the current equipment operating and does not have the clear criterion and analysis system about the ASL selection, in order to solve these problems, it was carried out that the association rule is employed for analyzing relationship between the effective order and issue list of the spare parts in point of the spare parts between usage unit and occurring month about purchase spare parts based on the star-schema table. Finally the new ASL selection way using the analysis result is proposed.