• Journal of agricultural medicine and community health
• /
• v.18 no.1
• /
• pp.77-91
• /
• 1993

This study was conducted to assess health medical center utilization pattern and its related factors among the rural inhabitants for the purpose of contribution to establishment of health medical center institutions. A questionnaire survey was carried out for object of 3,754 population of three primary school and three middle school student's parents (total 832 household) in Kyungbook Ulchin Gun rural area from 24 to 28 September, 1990. The summarized result are as follows, Respondents are 60.3% in male, 39.7% in female and 30-40s 81.3% in age, high school graduates 40.3% in education level and a regional medical insurance scheme in 44.1% in forms of health insurance. Recognition for health medical center was showed higher according to high educational, high income level, and short distance for location of health medical center of respondents (p < 0.01). Recognition for health medical center services was showed higher about care of medicaid in medical treatment services and higher preventive vaccination in health prevention services by respondents. Utilization rates of health medical center by out-patient care and preventive care service were 11.1 and 4.5 per 100 persons by year, but admission utilization rate was 34.6 per 10.000 persons by year. Motivations of health medical center utilization were showed a good care(45.7%), a good drugs(45.2%), and nearby health medical center(42.9%). In comparison health service levels of health medical center with general clinic was better (16.3%), similar(38.7%), 7(19.0%), and worse(19.0%) in view of health medical center utilizators. Inconvinience about health medical center utilized was the most higher longtime waiting, the next was limited utilization times. Transportation utilited were on foot(55%), by bus(35.5%), and so on. As mentioned above, there are many inhabitants who less understanding and less acknowledgement about health medical center and even mistake health center for health medical center. Therefore, there must be more information about health medical center. For higher utilization of health medical center, there must be considered expansion of health equipment, facilities, accomplishment with reinforcement of health staffs and efficiency management.

• Journal of Nutrition and Health
• /
• v.47 no.4
• /
• pp.300-312
• /
• 2014

Purpose: This study was performed to examine the sanitary knowledge level and degree of HACCP (hazard analysis critical control point) practice in school culinary staff in order to provide basic information for improving hygiene of school meals. Methods: Exactly 305 culinary staff members were selected from elementary, middle, and high schools in 14 cities and rural areas, including whole administrative districts in Chungnam province. Surveyed schools were selected by convenience sampling, and one subject was selected randomly from each school. Surveys were taken by self-administered questionnaires developed by researchers and questionnaire were distributed and collected by postal mail. Results: Sanitary education administered by school dietitians to culinary staff was more frequent and longer in elementary schools, followed by middle and high schools (p < 0.001). Sanitary knowledge level and degree of HACCP practice, except for a few CCP or CP of culinary staff, were highest in elementary schools and middle school followed by high schools (p < 0.05), respectively. School class was negatively correlated with sanitary knowledge level of culinary staff (p < 0.01), and frequency of sanitary education was positively correlated with sanitary knowledge level of culinary staff (p < 0.01). Sanitary knowledge level of culinary staff was positively correlated with degree of HACCP practice (p < 0.01). School class, daily frequency of meal service, work experience, rice washing machine, and total score of sanitary knowledge were significant variables influencing degree of HACCP practice in culinary staff. Conclusion: The above results show that the following points should be considered to improve hygiene of school meals. Sanitary education should be administered more frequently by school dietitians to culinary staff, especially to those in high schools, which showed the lowest sanitary knowledge level and degree of HACCP practice. In addition, facilities and equipment required for HACCP practice should be supported in small-sized elementary schools.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.7-12
• /
• 2006

Purpose: This is for the purpose to help the bill related to technologists be systematic and unitary by carefully analyzing a legislation, an enforcement ordinance, and enforcement regulations in the connection with the radiological worker and the radiation workers from the law and regulations related to technologists. Materials and Methods: Concerning technologists, a legislation, an enforcement ordinance, and enforcement regulations for a sort of medical technician, regarding the radiological worker, the rules of diagnosis radiation equipment safety management, and concerning the radiation workers, atomic energy law, an enforcement ordinance and enforcement regulations were gathered, compared with one another, and analyzed. Results: Among technologists, in the case of working in the department of diagnosis radiation, the title 'Radiological Worker' is used by the Medical Service Law, and in the case of working in the department of radiation tumors or the one of nucleus medicine, the title 'Radiation Workers' is used by the Atomic Energy Law. Conclusion: Besides the technical term that is used by characteristic tasks, unification of the terms that can be used in common is necessary for sure. And when a legislation, an enforcement ordinance, enforcement regulations, and notification, things like that in the radiation field are amended, certainly they should be done by mutual agreement through negotiation between the organization related to radiation and the governmental organization.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2015

The new medical device technologies for bio-signal information and medical information which developed in various forms have been increasing. Information gathering techniques and the increasing of the bio-signal information device are being used as the main information of the medical service in everyday life. Hence, there is increasing in utilization of the various bio-signals, but it has a problem that does not account for security reasons. Furthermore, the medical image information and bio-signal of the patient in medical field is generated by the individual device, that make the situation cannot be managed and integrated. In order to solve that problem, in this paper we integrated the QR code signal associated with the medial image information including the finding of the doctor and the bio-signal information. bio-signal. System implementation environment for medical imaging devices and bio-signal acquisition was configured through bio-signal measurement, smart device and PC. For the ROI extraction of bio-signal and the receiving of image information that transfer from the medical equipment or bio-signal measurement, .NET Framework was used to operate the QR server module on Window Server 2008 operating system. The main function of the QR server module is to parse the DICOM file generated from the medical imaging device and extract the identified ROI information to store and manage in the database. Additionally, EMR, patient health information such as OCS, extracted ROI information needed for basic information and emergency situation is managed by QR code. QR code and ROI management and the bio-signal information file also store and manage depending on the size of receiving the bio-singnal information case with a PID (patient identification) to be used by the bio-signal device. If the receiving of information is not less than the maximum size to be converted into a QR code, the QR code and the URL information can access the bio-signal information through the server. Likewise, .Net Framework is installed to provide the information in the form of the QR code, so the client can check and find the relevant information through PC and android-based smart device. Finally, the existing medical imaging information, bio-signal information and the health information of the patient are integrated over the result of executing the application service in order to provide a medical information service which is suitable in medical field.

• Journal of the Korean Society for Library and Information Science
• /
• v.34 no.1
• /
• pp.265-295
• /
• 2000

Education of library and information science must focus on practical education acted upon as a laboratory room in the characteristics of learning, because it cultivates a librarian as an information expert who can conduct professional affairs and services, applying traditional theory to the practical business of library and information. This dissertation suggested a new paradigm of an instructional media center as an advanced laboratory room which faithfully can run the curriculum of a library and information science for cultivating librarians, information experts who can satisfy the 21C information society. To carry out this purpose, I considered the various opinions of professors and librarians, after investigating and analyzing facilities and furnishings of laboratory rooms and teaching and learning data related to departments of library and information science in 32 universities. These contents can be summarized as follows : 1) Constructional media centers connected to education of library and information science sets laboratory rooms for practical classification and cataloging classes; laboratory rooms for film media which can utilize advanced media, listening tools, and practical materials; information management laboratory rooms which can experience the various information research methods through the Internet, cultivate the ability of information application, and teach the curriculum of library and information science related to computers. 2) Arrangement plans linked to laboratory rooms for classification and cataloging, one for film media, and one for information proceedings are as follows: , , and . 3) The size of each room is $162m^2$ (49.1pying); the number of persons to be admitted is about 40 to 50; each room has one media expert and one assistant as operating manager of exclusive responsibility. 4) Instructional & learning data which must be contained as instructional media of library and information science include computers, marginal tools related to it, listening materials, supplies for ordering books, teaching aids containing various equipment and tools, textbooks for practice, books connected to classification and cataloging for practice, and textbooks related to practical subjects and reference books. 5) Industrial media centers belonging to library and information science require for practice, general furnishings like bookshelves, and various material depository boxes.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.2
• /
• pp.149-179
• /
• 2011

Statistics of aviation accident in Korea show that safety level of training flights is high. However, more than 80% of aviation accidents happen owing to human factors. And because most reasons of them are concerned with pilot error, it is very important for student pilots who will transport a lot of passengers to develop the knowledge of safety and abilities of risk management for preventing accidents. In this study, in order to investigate the Human Factors which affect safety in training student pilots for flight, verified the correlationbetween experiences of accident, the differences according to the experience level of training flight and the differences between college student pilots and ordinary student pilots on the basis of human factors that composes the SHELL models. For the study, Using SPSS 17.0, conducted Correlation Analysis, Analysis of Variance(ANOVA) and t-test. To sum up the result of this study, student pilot's ability and equipment in the cockpit are the important factors for safety when pilots are training flight. Also the analysis of the differences between human factors according to the characters of student pilots' groups shows that college student pilots are affected by immanent factors and organizational cultures. So far, there haven't been any accidents which is related with human casualties when training at the ATO(Approved Training Organization). But accidents can occur at any time and anywhere. Especially the human factors which comprises most of aviation accident have a wide reach and are impossible to be eliminated, therefore, it is best to minimize them. Because ATO is the starting point to lead the aviation industry of Korea, we will have to be aware of problems and improve education/training of human factors.

• Food Science and Preservation
• /
• v.23 no.5
• /
• pp.746-752
• /
• 2016

This research was carried out to identify aerodynamic property as a function of moisture content for designing equipment such as for post-harvest management. Terminal velocity of two wheat varieties {Backjjung (B) and Jogyeong (J)} with selected sound, damaged kernel and foreign materials (Wheat stick, Wheat husks) were measured with a designed vertical wind column at different moisture contents from about 9 to 30% wet basis. The results showed that terminal velocity of wheat and foreign materials except of Jogyeong's husks (p<0.05) had a significant difference at p<0.001. With increasing moisture content, the aerodynamic property values of the kernels and foreign materials of the two wheat varieties increased linearly. In detail, terminal velocity of sound and damaged kernel increased from 5.46 to 7.13 m/sec (B) and 7.48 to 8.60 m/sec (J), damaged kernel from 5.91 to 7.00 m/sec (B) and 6.48 to 7.75 m/sec (J). For foreign materials the terminal velocity of wheat stick increased from 2.92 to 4.07 m/sec (B) and 3.74 to 5.22 m/sec (J) whereas that of husks from 1.07 to 1.85 m/sec (B) and 2.02 to 2.33 m/sec (J) each. For air separation of wheat and foreign materials, the air flow should be less than 5.22 m/sec due to the range (1.07~5.22 m/sec) of foreign materials in wheat.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.2
• /
• pp.156-165
• /
• 2002

Background: A tracheal stenosis is caused by mucosal ischemic injury related to a high cuff pressure ($P_{cuff}$) of the endotracheal tube. In contrast, aspiration of the upper airway secretion and impaired gas exchange due to cuff leakage is related to a low $P_{cuff}$. To prevent these complications, the $P_{cuff}$ should be kept appropriately because the appropriate $P_{cuff}$ appears to change according to the patient's daily respiratory mechanics. However, the constant cuff volume($V_{cuff}$) has frequently been instilled to the cuff balloon on a daily basis to maintain the optimal $P_{cuff}$ instead of monitoring the $P_{cuff}$ directly at the patients' bedside. To address the necessity of continuous $P_{cuff}$ monitoring, the change in the $P_{cuff}$ was evaluated at various $V_{cuff}$ levels on a daily basis in patients with long-term mechanical ventilation. The utility of mercury column sphygmomanometer for the continuous monitoring $P_{cuff}$ was also investigated. Method: The change in $P_{cuff}$ according to the increase in $V_{cuff}$ was observed in 17 patients with prolonged endotracheal intubation for mechanical ventilation for 2 week or more. This maneuver measured the change in $P_{cuff}$ daily during the mechanical ventilation days. In addition, the $P_{cuff}$ measured by mercury column sphygmomanometer was compared with the $P_{cuff}$ measured by an automatic cuff pressure manager. Results : There were no statistically significant changes of $P_{cuff}$ during more than 14 days of intubation for mechanical ventilation. However the $V_{cuff}$ required to maintain the appropriate $P_{cuff}$ varied from 1.9 cc to 9.6 cc. In addition, the intra-individual variation of the $P_{cuff}$ was observed from 10 $cmH_2O$ to 46 $cmH_2O$ at constant 3 cc $V_{cuff}$. The $P_{cuff}$ measured by the bedside mercury column sphygmomanometer is well coincident with that measured by the automatic cuff pressure manager. Conclusion: Continuous monitoring and management of the $P_{cuff}$ to maintain the appropriate $P_{cuff}$ level in order to prevent cuff related problems during long-term mechanical ventilation is recommended. For this purpose, mercury column sphygmomanometer may replace the specific cuff pressure monitoring equipment.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.652-659
• /
• 2015

The physical properties of wheat kernels were determined as a function of moisture content to optimize the design of equipment for post-harvest management. Several properties, including bulk density, dynamic repose angle, one thousand-kernel weight, specific gravity, length, width, thickness, and area of two wheat cultivars (Baekjjung: B and Jogyeong: J ), were studied in the moisture range from approximately 9% to 30% wet basis. As moisture increased, length increased linearly from 6.42 to 7.20 mm (B) and 8.71 to 9.15 mm (J), width increased from 2.90 to 3.49 mm (B) and 4.12 to 4.43 mm (J), thickness from 2.94 to 3.20 mm (B) and 3.29 to 3.63 mm (J), and area from 14.13 to $19.44mm^2$ (B) and 27.75 to $31.25mm^2$ (J). Additionally, the dynamic repose angle and one thousand-kernel weight increased linearly from $46.3^{\circ}$ to $54.0^{\circ}$ (B) and $46.3^{\circ}$ to $54.5^{\circ}$ (J) and from 32.26 to 41.51 g (B) and 45.30 to 63.07 g (J), respectively, as the moisture content increased. Based on the experimental measurements, only the bulk density and specific gravity decreased from 754.0 to $664.1kgm^{-3}$ (B) and 776.1 to $660.0kgm^{-3}$ (J) and from 1.2950 to 1.2265 (B) and 1.3379 to 1.2671 (J), respectively, as moisture content increased.