• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.246-253
• /
• 1994

Four Quercus forests in Mt. Mohu were studied to investigate biomass, net production and effective biomass estimation method. Five $10m{\times}10m$ quadrats were set up, ten sample trees were cut and roots of three sample trees were excavated for dimension analysis in each forest. There was little difference in accuracy among three allometric biomass regression models of logWt=A+BlogD, $logWt=A+BlogD^2H$ and logWt=A+BlogD+ClogH, where Wt, D and H were dry weight, DBH and height, respectively. Analysis of covariance showed that there were no significant differences among slopes and intercepts of allometric biomass regressions, logWt=A+BlogD, of four Quercus species. Biomass of Q. acutissima, Q. nariabilis, Q. serrata and Q. mongolica forests were 164.0, 158.9, 115.3 and 118.9t/ha, respectively. Net production of Q. acutissima, Q. variabilis. Q. serrata and Q. mongolica forests were 25.0, 23.2, 14.5 and 12.6t/ha/yr., respectively. The proportion of roots to total biomass and total net production of Q. mongolica forest was higher than that of three other species forests. Net assimilation ratio of Q. acutissima, Q. variabilis, Q. serrata and Q. mongolica forests were 2.87, 2.80, 3.20 and 2.95, respectively. Relatively less leaf biomass of Q. serrata and Q. mongolica forests were the reason why total biomass and total net production of Q. serrata and Q. mongolica forests were less than those of Q. acutissima and Q. variabilis.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.17-30
• /
• 1978

Press drying was used on italian poplar (Populus euamericana) to find the profitable means of drying. This study was designed to investigate the process of platen drying considering core temperature, drying time, current moisture content, drying rate, shrinkage and recovery, and green volume specific gravity, equilibrium moisture content and dimensional stability of press dried material and air dried material, The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$. The results were summarized as follows. 1. Core temperature was divided into three stages of drying characterized by period initial heating, plateau temperature and rising core temperature. Plateau temperature was 114 to $119^{\circ}C$. 2. The following predicting equations of drying time(y) in different core temperatures were developed for initial thickness($x_1$), initial moisture content ($x_2$) and final moisture content ($x_3$) 3. The predicting equaltion of current moisture content(u) was log u=4.658-0.060t as funtion of drying time(t) and that of drying rate(r) was log r=-2.797-0.049t. Current moisture content and drying rate of air drying were shown in figure 2. 4. The predicting equation of shrinkage in thickness direction(y) was log y=1.933+0.038t as function of drying time(t), and that of expansion in width direction was $y=-0.692+0.043t-0.001t^2$. 5. Thickness shrinkage was increased more than proportional at to pressure increase. Width shrinkage and thickness recovery was greatest at 35psi. 6. Green volume specific gravity of press dried material was 25% greater than that of air dried material. But equilibrium moisture content of press dried material was less 24% than that of air dried material. Antishrinkage efficiency of press dried material were obtained 27.7%.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.80-91
• /
• 1984

The purposes of this study are to analyze and forecast the domestic demand for papers by regression models with time-series data (1965-81). For the period of 1965-81, the real GNP of Korea grew at annual average increase rate of 8.8 percent. On the other hand, the domestic demand of papers grew at annual average increase rate of 17.9 percent in this period. Especially, the annual average increase rate for board-papers accounted to 25.8 percent. To analyze domestic demand for papers, GNP, per capita GNP, price findex of papers, production activity index of the major papers consuming industries and price index of substitutive goods were selected as independent variables. The expected values of domestic demand for papers were computed by forecasting equations as follows. T-values are in parentheses. ${\ell}nDDP=2.452+1.986{\ell}nPG-0.844{\ell}nPWI$ $(33.397)^*\;(-6.149)^*\;R^2=0.997$ ${\ell}nDDP=6.468+0.827{\ell}nPDA$ $(17.403)^*\;R^2=0.950$ DDP : Domestic demand for papers PG : Real GNP per capita (1,000 won) PWI : Real price index of papers (1980 = 100) PDAV : Production activity index of the major papers consuming industries The results analyzed and forecasted by these models are summarized as follows: The domestic demand for papers had positive correlation toward per capita GNP and production activity index of the major papers consuming industries. Per capita GNP elasticity of the domestic demand for papers was the most elastic among independent variables. The price elasticity of domestic demand for papers had negative sign and inelastic. These were not only statistically significant but theoretically compatible. The domestic demand for papers was projected to be 3,152-4,470 thousand mit in 1991, representing at annual increase rate of 5.0-12.4 percent during the period of 1982-91. Domestic demand for papers per capita was projected to be 69.1-98.0 kg in 1991.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.65-79
• /
• 1992

This study is concerned with the optimal design of two hinged steel arches with I cross sectional type and aimed at the exact analysis of the arches and the safe and economic design of structure. The analyzing method of arches which introduces the finite difference method considering the displacements of structure in analyzing process is used to eliminate the error of analysis and to determine the sectional force of structure. The optimizing problems of arches formulate with the objective functions and the constraints which take the sectional dimensions(B, D, $t_f$, $t_w$) as the design variables. The object functions are formulated as the total weight of arch and the constraints are derived by using the criteria with respect to the working stress, the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge and including the economic depth constraint of the I sectional type, the upper limit dimension of the depth of web and the lower limit dimension of the breadth of flange. The SUMT method using the modified Newton Raphson direction method is introduced to solve the formulated nonlinear programming problems which developed in this study and tested out throught the numerical examples. The developed optimal design programming of arch is tested out and examined throught the numerical examples for the various arches. And their results are compared and analyzed to examine the possibility of optimization, the applicablity, the convergency of this algorithm and with the results of numerical examples using the reference(30). The correlative equations between the optimal sectional areas and inertia moments are introduced from the various numerical optimal design results in this study.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.24-31
• /
• 2016

BACKGROUND: Heavy metal adsorption not only depends on rapid cooling slag(RCS) characteristics but also on the nature of the metals involved and on their competitive behavior for RCS adsorption sites. The goal of this study was to investigate the competitive absorption characteristics of Cu, Cd and Zn in single- and multi-metal forms by RCS.METHODS AND RESULTS: Both single- and multi-metal adsorption experiments were conducted to determine the adsorption characteristics of RCS for the heavy metals. Adsorption behaviors of the heavy metals by RCS were evaluated using both the Freundlich and Langmuir adsorption isotherm equations. The maximum adsorption capacities of metals by RCS were in the order of Cu(16.6 mg/g) > Cd(8.1 mg/g) > Zn(6.2 mg/g) in the single-metal adsorption isotherm and Cu(14.5 mg/g) >> Zn(1.3 mg/g) > Cd(0.6 mg/g) in the multi-metal adsorption isotherm. Based on data obtained from Freundlich and Langmuir adsorption models and three-dimensional simulation, multi-metal adsorption behaviors differed from single- metal adsorption due to competition. Cadmium and Zn were easily exchanged and substituted by Cu during multi-metal adsorption.CONCLUSION: Results from adsorption experiments indicate that competitive adsorption among metals increases the mobility of these metals.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.169-177
• /
• 2014

BACKGROUND: The ferronickel and rapid cooling slags used in present study are industrial wastes derived from a steel factory in Korea. These slags are used as almost road construction materials after magnetic separation. However, the use of slag to remove phosphorus from wastewater is still a relatively less explored. The objective of this work was to evaluate the feasibility of ferronickel slag (FNS) and rapid cooling slag (RCS) as sorbents for phosphorus removal in wastewater. METHODS AND RESULTS: Adsorption experiments were conducted to determine the adsorption characteristics of the FNS and RCS for the phosphorus. Adsorption behaviour of the phosphorus by the FNS and RCS was evaluated using both the Freundlich and Langmuir adsorption isotherm equations. FNS and RCS were divided into two sizes as effective sizes. Effective sizes of FNS and RCS were 0.5 and 2.5 mm, respectively. The adsorption capacities (K) of the phosphorus by the FNS and RCS were in the order of RCS 0.5 (0.5105) > RCS 2.5 (0.3572) ${\gg}$ FNS 2.5 (0.0545) ${\fallingdotseq}$ FNS 0.5 (0.0400) based on Freundlich adsorption isotherm. The maximum adsorption capacities (a; mg/kg) of the phosphorus determined by the Langmuir isotherms were in the order of RCS 0.5 (3,582 mg/kg) > RCS 2.5 (2,983 mg/kg) > FNS 0.5 (320 mg/kg) ${\fallingdotseq}$ FNS 2.5 (187 mg/kg). RCS 0.5 represented the best sorbent for the adsorption of phosphorus. In the experiment, the Langmuir model showed better fit with our data than the Freundlich model. CONCLUSION: This study indicate that the use of RCS in constructed wetlands or filter beds is a promising solution for phosphorus removal via adsorption and precipitation mechanisms.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.737-744
• /
• 2007

An experiment was conducted to compare the ME values of imported corns measured by In vivo(TME) and In vitro(MEn, ME and MEpc) methods and to investigate the true amino acid availability(TAAA) and the true nutrient availability(TNA) of imported corns. For TME assay, twenty four 57-weeks-old Hy-Line roosters were assigned to fasting group(4 roosters) and four corn groups(5 roosters each): USA; corn produced in the United States, ARG; corn produced in Argentina, CHN; regular corn produced in China, CHNP; premium corn produced in China. The MEn, ME and MEpc values were determined by equations based on chemical analysis. The TME value of USA(3,745kcal/kg) in as fed basis was significantly (P<0.01) higher than ARG(3,555kcal/kg) and CHNP(3,518kcal/kg) but was not significantly different from CHN(3,671kcal/kg). The TME value of USA(4,144kcal/kg) in DM basis was not significantly different from CHN(4,060kcal/kg) and CHNP(4,008kcal/kg) but was significantly(P<0.05) higher than ARG(4,001kcal/kg). There were significant differences in TAAA of phenylalanine, histidine and arginine among imported corns. Those of USA were highest but overall TAAA was not significantly different among imported corns. True availability of NFE of USA, ARG and CHN was significantly(P<0.05) higher than that of CHNP. However, true availability of crude protein, crude fat, crude fiber and crude ash were not significantly different among corns. The correlation coefficient between TME and MEn value was 0.91 which was significant at P<0.1 but correlation coefficient between TME and ME value and between TME and MEpc value was 0.90 and 0.83, respectively which was not significant at P<0.1. In conclusion, US corn was highest in TME values and Chinese premium corn was not significantly different from regular Chinese corn. The MEn value obtained by equation based on chemical analysis may be used as a tool to evaluate TME value of corn.

• Korean Journal of Food Science and Technology
• /
• v.40 no.6
• /
• pp.603-610
• /
• 2008

The principal objective of current study was to evaluate the potential of near infrared reflectance spectroscopy (NIRS) as a non-destructive method for the prediction of the amylose and protein contents of un-hulled and brown rice in broad-based calibration models. The average amylose and protein content of 75 rice accessions were 20.3% and 7.1%, respectively. Additionally, the range of amylose and protein content were 16.6-24.5% and 3.8-9.3%, respectively. In total, 79 rice germplasms representing a wide range of chemical characteristics, variable physical properties, and origins were scanned via NIRS for calibration and validation equations. The un-hulled and brown rice samples evidenced distinctly different patterns in a wavelength range from 1,440 nm to 2,400 nm in the original NIR spectra. The optimal performance calibration model could be obtained by MPLS (modified partial least squares) using the first derivative method (1:4:4:1) for un-hulled rice and the second derivative method (2:4:4:1) for brown rice. The correlation coefficients $(r^2)$ and standard error of calibration (SEC) of protein and amylose contents for the un-hulled rice were 0.86, 2.48, and 0.84, 1.13, respectively. The $r^2$ and SEC of protein and amylose content for brown rice were 0.95, 1.09 and 0.94, 0.42, respectively. The results of this study suggest that the NIRS technique could be utilized as a routine procedure for the quantification of protein and amylose contents in large accessions of un-hulled rice germplasms.

• Korean Journal of Ecology and Environment
• /
• v.38 no.2 s.112
• /
• pp.196-206
• /
• 2005

The fish community in the mid-upper region of Gam Stream was examined seasonally from 2001 to 2003 in order to perform an environmental impact assessment prior to a construction of Gamcheon Multipurpose Dam. Additional investigation was conducted in August 2004 to confirm the fish fauna reported and to examine the ecological characteristics of Zacco temminckii population. The total number of fish caught from the study sites was 1,081 fish representing 5 families 14 species. There were 6 Korean endemic species including Coreoleuciscus splendidus, Squalidus gracilis majimae, Microphysogobio yaluensis, Liobagrus mediadiposalis, Coreoperca herzi and Odontobutis platycephala, but no endangered or vulnerable species were found. Length-weight relation, condition factor (K) and relative condition factor (Kn) of Zacco temminckii were compared by the study sites and stream. The equations based on length-weight relation in Buhang and Gam Streams were TW\;=\;0.000004TL^{3.2357}$ and TW\;=\;0.000002TL^{3.3566}$, respectively indicating the fish in Gam Stream became more rotund as length increases. The condition factor (K) and relative condition factor (Kn) against total length of Zacco temminckii at two streams indicated that the fish (>70 mm) in Cam Stream (mean K and Kn= 1.116, 1.21 respectively) had better nutritional condition than those in Buhang Stream (mean K and Ln = 1.046, 1.14 respectively). The results were corresponded with natural disturbances such as drought and intensive rainfall from 2001 to 2003 followed by human activities such as stream repair works. Therefore, it is considered to perform environmental impact assessment with not only confirmation of fish composition but also examination of ecological characteristics in population- level.

• Korean Journal of Food Science and Technology
• /
• v.2 no.2
• /
• pp.8-16
• /
• 1970

Exploitation of leaf protein concentrates for human consumption is very important. Leaf protein concentrates can be easily prepared by mechanically mincing leaves material and press it for getting the juice. Crude protein can be separated from the juice by aging, adjusting the pH, or heating to $75-80^{\circ}C$ etc. This report deals with the extractability of total-N from 69 species of fresh leaves by mechanical process, and then compared the recovery of leaf protein concentrates from leaf extracts by treating with TCA, pH adjustment and heating. Results are summarized as follows. 1. In general, the greater the content of total-N of leaves the greater the percentage extraction. Extraction of the juice from leaves is needed at least two times. The simple equations are constituted between the total-N (T; %) and the first and second extractability ($E_1,\;E_2;\;%$) of the total-N of leaves, as follows: $E_1=0.8168T\;E_2=0.1830T$ 2. The optimum pH value for coagulating protein from extracts is considered to be 3.5 to 4.5. However, the products of leaf protein concentrate by the pH adjustment of extracts are generally dull in color with rich elasticity. 3. Recoveries of the leaf protein concentrate from extracts by treating methods were in the following order of TCA treatment> pH 4 treatment> pH 3 treatment> heat treatment. The yield of leaf protein concentrates decreased bout 10% with pH 4 treatment, 11.4% with pH 3 treatment, and 14.8% with heat treatment compared with the TCA treatment. 4. The heat treatment is the most benifitial method for the production of leaf protein concentrates with regard to properties of texture, color and yield of products and easiness of the treatment method.