• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.406-414
• /
• 2016

본 연구에서는 리그닌 기반 폴리아크릴로나이트릴(polyacrylonitrile, PAN) 공중합체를 전기방사하여 나노탄소섬유 매트를 제조한 다음, 에폭시 수지를 보강하여 제조한 복합재료의 열적 특성 및 기계적 강도를 조사하였다. 나노탄소섬유 매트/에폭시 복합재는 에폭시 수지와 유사한 열분해 거동을 보이고 있는 반면에 유리전이온도는 $106.9^{\circ}C$로 순수에폭시 수지의 유리전이온도($T_g$) $90.7^{\circ}C$보다 다소 높은 경향으로 나타나 열적 안정성이 향상된 결과로 사료된다. 리그닌 기반 공중합체 및 순수 PAN으로 만든 나노탄소섬유 매트의 인장강도는 각각 7.2 및 9.4 MPa로 나타났으며, 리그닌 기반 나노탄소섬유 매트/에폭시 복합재료의 인장강도는 43.0 MPa로 나타났다. 이는 나노탄소섬유 매트/에폭시 복합재료에서 에폭시 수지 매트릭스(matrix) 내에서 나노탄소섬유가 강화제(reinforcing filler)로 작용한 효과로 약 6배의 인장강도 향상을 보였다. 인장강도 측정 후 시편의 절단면에서 나노탄소섬유 자체의 높은 인장강도(478.8 MPa) 및 에폭시 수지와의 약한 계면접착성에 기인하는 나노섬유의 뽑힘현상이 관찰되었다.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.332-336
• /
• 2009

초소형 전자소재 접착용 고분자 소재 접착제는 접착소재와 칩 또는 기판 간의 열팽창계수 차이에 의한 박리, 크래킹과 접착력 부족 등의 문제점이 발생된다. 이러한 결점의 보완을 위하여 무기입자 및 첨가물을 통해 접착제의 열팽창계수를 낮추거나, 접착제의 유연성을 부여하는 방법 등이 사용되고 있다. 실록산/실리카/에폭시 나노복합재에서 실록산과 실리카의 첨가가 열적, 기계적 물성에 미치는 효과를 확인하기 위한 실험을 진행하였다. 3-glycidoxypropyltrimethoxysilane(GPTMS)로 처리하여 친수성의 나노실리카 입자를 소수성 입자로 변성시켜 고분자 매트릭스와의 상용성 문제를 해결하고자 하였다. 표면처리하지 않은 실리카인 $Aerosil^{(R)}$200을 첨가한 AMS/Aerosil/에폭시 나노복합재의 유리전이온도는 125에서 $118^{\circ}C$로 감소하였고, 모듈러스는 2,225에서 2,523 MPa까지 증가하였다. 표면처리한 M-silica를 첨가한 AMS/M-silica/에폭시 나노복합재 또한 비슷한 경향이었으며, 유리전이온도가 124에서 $120^{\circ}C$로 감소했고 모듈러스는 1,981에서 2,743 MPa까지 증가하였다. 실리카의 표면개질 유무에 상관없이 열팽창계수는 감소하는 추세를 보였다.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.137-160
• /
• 2015

The one-way (two-way) flexural strength of RCC prisms (circular slabs) reinforced with glass fiber textiles is addressed. To this end, alkaline-resistant glass fiber textiles with three surface weights were used in the composite, the matrix concrete was designed with zero/nonzero slump, and the textiles were used with/without an intermediate layer provided by epoxy resin and sand mortar. Prisms were tested under a four-point loading apparatus and circular slabs were placed on simple supports under a central load. Effects of the amount and geometry of reinforcement, matrix workability, and the intermediate layer on the ultimate load and deflection were investigated. Results revealed that, with a specific reinforcement amount, there is an optimum textile tex for each case, depending on the matrix mix design and the presence of intermediate layer. Similar results were obtained in one-way and two-way bending tests.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.779-786
• /
• 2006

Woven sisal textile reinforced composites were manufactured to evaluate fracture toughness, and tensile test. All specimens were immersed in water five times. All specimens are immersed in pure water during 9 days at room temperature, and dried in 1 day at $50^{\circ}C$. Two kinds of polymer matrices such as epoxy and vinyl-ester were used. Fractured surface were investigated to study the failure mechanism and fiber/matrix interfacial adhesion. It is shows that it can be enhanced to improve their mechanical performance to reveal the relationship between fracture toughness and water absorption fatigue according to different polymer matrices. Water uptake of the epoxy composites was found to increase with cycle times. Mechanical properties are dramatically affected by the water absorption cycles. Water-absorbed samples observed poor mechanical properties such as lower values of maximum strength and extreme elongation. The $K_{IC}$ values demonstrate a decrease in inclination with increasing cyclic times of wetting and drying fur the epoxy and vinyl-ester.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.89-92
• /
• 2001

Drop weight impact tests were performed to investigate the impact behavior of carbon fiber/epoxy composite laminates reinforced by short fibers and other interleaving materials. Characterization techniques, such as cross-sectional fractography and scanning acoustic microscopy, were employed quantitatively to assess the internal damage of some composite laminates. Scanning electron microscopy was used to observe impact damage and fracture modes on specimen fracture surfaces. The results show that composite laminates experience various types of fracture; delamination, intra-ply cracking, matrix cracking and fiber breakage depending on the interlayer materials. Among the composite laminates tested in this study, the composites reinforced by Zylon fibers showed very good impact damage resistance with medium level of damage, while the composites interleaved by poly(ethylene-co-acrylic acid) (PEEA) film is expected to deteriorate the bulk strength due to the reduction of fiber volume fraction, even though the damaged area is significantly reduced.

• International Journal of Concrete Structures and Materials
• /
• 제10권4호
• /
• pp.539-553
• /
• 2016

Polymer concrete (PC) has been favoured over Portland cement concrete when low permeability, high adhesion, and/or high durability against aggressive environments are required. In this research, a new class of PC incorporating Multi-Walled Carbon Nanotubes (MWCNTs) is introduced. Four PC mixes with different MWCNTs contents were examined. MWCNTs were carefully dispersed in epoxy resin and then mixed with the hardener and aggregate to produce PC. The impact strength of the new PC was investigated by performing low-velocity impact tests. Other mechanical properties of the new PC including compressive, flexural, and shear strengths were also characterized. Moreover, microstructural characterization using scanning electron microscope and Fourier transform infrared spectroscopy of PC incorporating MWCNTs was performed. Impact test results showed that energy absorption of PC with 1.0 wt% MWCNTs by weight of epoxy resin was significantly improved by 36 % compared with conventional PC. Microstructural analysis demonstrated evidence that MWCNTs significantly altered the chemical structure of epoxy matrix. The changes in the microstructure lead to improvements in the impact resistance of PC, which would benefit the design of various PC structural elements.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.338-346
• /
• 2000

Although the net-shape molding of composites is generally recommended, molded composites are frequently required cutting or grinding due to the dimensional inaccuracy for precision machine elements . During the composite machining operations such as cutting and grinding, the temperature at the cutting point may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the cutting point during cut-off grinding of carbon fiber epoxy composites was measured. The cutting force and surface roughness were also measured to investigate the cut-off grinding characteristics of the composites. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed and feed rate. From the experimental investigation, the optimal conditions for the composite cut-off grinding were suggested.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.31-34
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process has been utilized for providing through-thickness reinforcements. 2D prefonl1S were stacked with S-2 glass plain weave, and 3D preforms were fabricated using the stitching process. For the matrix system, epoxy and phenol resins were considered. To examine the damage resistance performance the low velocity drop weight impact test has been carried out, and the impact damage was examined by scanning image. CAI (Compressive After Ih1paet) tests were also conducted to evaluate residual compressive strength. Compared with 2D epoxy composites, 2D phenol composites showed drastic reduction in the compressive strength prior to impact because of the higher contents of voids. The damage area of 2D phenol composites were also larger than that of 2D epoxy composites. However, by introducing the stitching, the damage area of 3D phenol composites was reduced by 60%, while the CAI strength improvement was negligible.

• 공업화학
• /
• 제10권4호
• /
• pp.615-619
• /
• 1999

스테아릴트리메틸암모늄 이온만 삽입된 몬모릴로나이트는 나노복합재료를 형성하지 못하였다. 그러나 스테아릴트리메틸암모늄과 m-페닐렌디암모늄 염이 함께 삽입된 몬모릴로나이트와 diglycidyl ether of bisphenol A(DGEBA)와 가열하면 중합반응이 일어나 폴리에테르-몬모릴로나이트의 나노복합재료를 합성하였다. 합성한 나노복합재료를 XRD과 TEM을 통하여 에폭시 메트릭스내의 몬모릴로나이트의 실리케이트층이 한층 균일하게 분산되어 있음을 확인하였다. 그리고 각각의 실리케이트 층간거리는 $250{\sim}500{\AA}$ 정도였다.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.