• 한국방사선학회논문지
• /
• 제12권5호
• /
• pp.615-621
• /
• 2018

최근 웰빙이라는 자연친화적인 건강한 삶을 핵심 가치로 추구하면서 실내 공기질의 개선을 위한 다양한 친환경 제품이 개발되고 있다. 본 연구에서는 기존 친환경 도료의 문제점을 해결할 뿐만 아니라 천연방사성 물질인 라돈 저감이 가능한 활성탄 복합 시트를 개발하고 라돈, HCHO, VOCs에 대한 저감 효과를 평가하였다. 활성탄 복합 시트는 규산나트륨 에멀젼과 활성탄을 혼합하여 활성탄 액상 도료를 제조하고 에어스프레이 공법을 통하여 복합 시트로 제작하였다. 제작된 활성탄 복합 시트에 대한 유해물질 저감 성능을 분석하기 위해 라돈은 환경부 고시, HCHO 및 VOCs는 KCL-FIR-1085 기준에 부합하도록 설계하였다. 실험결과, 제작된 활성탄 복합 시트는 20시간에서 약 90.8%의 라돈 저감 효율을 가지는 것으로 평가되었고, HCHO 및 VOCs는 3시간에서 각 96.7%, 96.6%의 저감 효율이 나타났다. 이러한 결과는 실내 공기 질 개선을 위한 제품 개발 시 기초 자료로서 활용할 수 있을 것으로 사료된다.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1354-1358
• /
• 2008

본 연구에서는 EU의 6대 유해물질(Pb, Hg, Cd, $C^{+6}$, PBB/PBDE) 규제와 국내 환경부의 환경유해물질 규제법규에 대응할 수 있는 친환경 무독성 난연 도료를 개발하였다. 개발한 도료는 VOC(휘발성유기화합물) 배출이 적어 친환경적이며, 할로겐계를 탈피하여 인체안전성 확보됨과 동시에 검정기술기준(KOFEIS 0201)에 적합한 수용성 유 무기계 복합화합물이다. 유 무기계 난연 복합화합물 제조를 위하여 $Mg(OH)_2$, $Sb_{2}O_{3}$, 붕산아연 등의 난연성 화합물을 사용하였으며 각 화합물의 최적배합 비율은 1: 2: 2였다. 최종적으로 난연 복합화합물을 바인더(마이셀 2%) 및 용제(물)와 1: 0.5: 0.5로 배합하여 난연도료를 제조하여 그 난연 성능을 테스트하였다.

• 한국유기농업학회지
• /
• 제23권2호
• /
• pp.281-289
• /
• 2015

In sustainable viticulture, green manure represents a safe and non-polluting way to bring large quantities of organic matter into the soil. The cultivation of green manure crops plays an important role in soil quality and sustainability of agricultural system. This study was conducted to evaluate the effects of green manure fertilization on yield and quality of the Campbell Early grape variety in the organic vineyard. Hairy vetch was the more productive green manure crop, yielding higher dry materials. Average yields of grape were significantly greater in hairy vetch+rye ($13.02ton\;ha^{-1}$) than nature weed ($11.65ton\;ha^{-1}$), respectively. The concentrations of total as well as individual anthocyanins were consistently higher with hairy vetch treatment compared with rye and nature weed, thus making the green manure cultivation is an environmentally friendly cultivation to increase the yield and anthocyanin contents in organic grape.

• 환경생물
• /
• 제41권4호
• /
• pp.463-472
• /
• 2023

벼의 주요 해충인 먹노린재에 대해 실내에서 충체분무법과 기주분무법을 통해 시판 중인 유기농업자재(EFOM) 27종을 대상으로 살충 활성을 평가하였다. 그 결과, 유기농업자재 7종(EFOM-8, -10, -12, -13, -19, -20, -26)에서 기주식물에만 살포하는 것보다 충체에 직접 살포되어 접촉하는 경우에만 높은 살충 효과를 보였다. 실내 벼 포트 검정에서는 선발된 7종 모두 담수 조건에서 살충률이 73.3% 이상이었으며, 특히 EFOM-13과 EFOM-20은 퇴수 조건에서보다 담수 조건에서 살충률이 1.5~1.8배 높은 차이를 보였다. 야외 간이 검정에서 EFOM-10 (마늘 80%), EFOM13 (님 62%), EFOM-26 (고삼 70%+에틸알콜 28%+제충국 2%)는 7일차 담수한 논에서 88.9%의 높은 방제가를 보였고 퇴수한 논보다 방제가는 1.4~1.9배 높았다. 선발된 EFOM-10을 살포한 농가의 담수한 논에서도 7일차 방제가는 86.2%로 퇴수한 논의 방제가 61.9%보다 1.4배 높았다. 종합적으로 살포액의 충분한 충체 접촉과 논의 담수 조건이 유기농업자재의 방제 효과를 높일 수 있음을 보여주었다. 이러한 연구 결과가 앞으로 농가에서 적용할 수 있는 최적의 먹노린재 방제전략 수립에 도움이 되기를 기대한다.

• 한국유기농업학회:학술대회논문집
• /
• 한국유기농학회 2009년도 하반기 학술대회
• /
• pp.284-284
• /
• 2009

EFA production systems have through necessity resulted in the development of innovative practices for weed, pest and diseases control, for example, using ducks and snails for weed control in paddy fields. These practices began to be introduced in the early 1990's and the techniques have become more popular and have been adapted to suit regional conditions. In this study, the production practices, productivity and economic performances of organic and non-chemical rice farming adopting ducks and snails for weed control were compared. In the production practices, Korean organic and non-chemical farming seem to have several concerns in terms of sustainability. It comprises lack of resistant variety use and rotational cropping system as well as high dependency upon external inputs such as organic fertilizer and farming materials for pest control. The production level of organic farming is approximately similar level but 20% higher income than non-chemical farming, while, when it was compared with conventional farming organic farming showed 20% lower productivity but 20% higher income. Organic farming shows 15% to 18% higher profits than non-chemical farming as the snail-using organic farming tends to have higher income and lower input costs than duck-using organic farming. This may encourage more farmers to convert to organic production using these techniques than simply non-chemical farming in the future. This organic conversion could be more promoted by policy intervention. However, it may result in increased supply and therefore decreased prices for organic rice in the long term unless further market demand occurs. Balanced policy measures considering production as well as marketing and consumption are urgently required for the sustainable development of organic farming.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.93-99
• /
• 2008

The environment draws attention in the global community and a growing number of Koreans have interest in improving the quality of life, the importance of house environment has attracted the attention of the public. Against this backdrop, constructors have unveiled environmentally -friendly projects. However, they failed to establish people-oriented environment by being occupied with maximizing profitability through the improvement of brand image and caused sick house syndrome that has recently made controversy. In this regard, the study analyzed the mechanism of discharge of TVOC, one of the sick house syndrome-causing materials, that affects IAQ and its characteristics and examined the effect that granodiorite has on reduction of the discharge of TVOC in order to minimize damage. Experimental sample consisted of interior finishing materials frequently used in ceiling, wall and floor and adhesives used at a time of construction, and the TVOC of building materials was measured through the use of septum bottle unlike In the existing chamber method. Measures to counter the sick house syndrome were suggested by reducing the possible damage from the stage of selection of building material and by figuring out the effect that the granodiorite has on reduction of the discharge of TVOC.

• 접착 및 계면
• /
• 제8권1호
• /
• pp.28-33
• /
• 2007

It is a main trend not to use organic solvents in the adhesive industry from the recent environmental and safe points of view. For example, water-based, hot-melt, or UV curable adhesives are being investigated. Several different kinds of tackifiers that are formulated in the adhesives in order to give them more functional properties like initial tack and higher adhesion, etc., have been proposed to meet the recent trend. Firstly, the characteristics and fundamental properties of the respective materials are presented. In Japan, the trend to develop the water-based adhesives is most remarkable. While the environmental regulations are getting harder, Arakawa Chemical has been spending a lot of energy for the research, and developed toluene-free and solvent free tackifier dispersions that are presented precisely.

• 한국해양공학회지
• /
• 제25권1호
• /
• pp.32-38
• /
• 2011

Galvanized steel has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc because rust will not attack this protective metal. For countless outdoor, marine, or industrial applications, galvanized steel is an essential fabrication component. The reduction of the corrosion rate of zinc is an important topic. In the past, a very popular way to reduce the corrosion rate of zinc was to use chemical conversion layers based on $Cr^{+6}$. However, a significant problem that has arisen is that the use of chromium salts is now restricted because of environmental protection legislation. Therefore, it is very important to develop new zinc surface treatments that are environmentally friendly to improve the corrosion resistance of zinc and adhesion with a final organic protective layer. In this study, a Urethane solution (only Urethane 20 wt.%; S-700) and an organic/inorganic solution with Si (Si polysilicate 10 wt.% + Urethane 10 wt.%; LRO-317) are used. Based on the salt spray test of 72 h, S-700 and LRO-317 had a superior effect for the corrosion resistance on EGI and HDGI, respectively.

• Corrosion Science and Technology
• /
• 제17권2호
• /
• pp.74-80
• /
• 2018

The electronic industries require environmentally-friendly and highly functional materials to enhance the quality of human life. Home appliances require insect repellent steels that work to protect household microwave ovens from incurring damage by insects such as fire ants and cockroaches in tropical regions. Thus, POSCO has developed new types of functional steels, coated with an array of organic-inorganic hybrid composites on the steel surface, to cover panels in microwave ovens and refrigerators. The composite solution uses a fine dispersion of hybrid solution with polymeric resin, inorganic and a pyrethroid additive in aqueous media. The hybrid composite solution coats the steel surface, by using a roll coater and is cured using an induction curing furnace on both the continuous galvanizing line and the electro-galvanizing line. The new steels were evaluated for quality performances, salt spray test for corrosion resistance and biological performance for both insect repellent and antimicrobial activity. The new steels with organic-inorganic composite coating exhibit extraordinarily biological functionalities, for both insect repellent and antimicrobial activities for short and long term tests. The composite-coating solution and experimental results are discussed and suggest that the molecular level dispersion of insecticide on the coating layer is key to biological functional performances.

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.71-74
• /
• 2009

Electroplated Cu is a cost efficient metallization method in microelectronic packaging applications. Typically in 3-D chip staking technology, utilizing through silicon via (TSV), electroplated Cu metallization is inevitable for the throughput as well as reducing the cost of ownership (COO).To achieve a comparable film quality to sputtering or CVD, a pre-cleaning process as well as plating process is crucial. In this research, atmospheric plasma is employed to reduce the usage of chemicals, such as trichloroethylene (TCE) and sodium hydroxide (NaHO), by substituting the chemical assisted organic cleaning process with plasma surface treatment for Cu electroplating. By employing atmospheric plasma treatment, marginally acceptable electroplating and cleaning results are achieved without the use of hazardous chemicals. The experimental results show that the substitution of the chemical process with plasma treatment is plausible from an environmentally friendly aspect. In addition, plasma treatment on immersion Sn/Cu was also performed to find out the solderability of plasma treated Sn/Cu for practical industrial applications.