• Korean Journal of Health Psychology
• /
• v.16 no.3
• /
• pp.557-575
• /
• 2011

This study tried to examine the characteristics of attention deficits in patients with Obstructive Sleep Apenea(OSA) with different age levels, and to examine which indices of polysomnograms might be related to the indices of attention deficits in OSAs. Two age-level groups and a normal control group were subjected to two computerized attention tests, including a continuous performance test(CPT) and a change blindness task(CBT). In addition, the three groups were subjected to a Polysomnography to extract several sub-indicators of polysomnogram, and an Epworth Sleepiness Scale which measures subjective sleepiness. As results, the OSAs showed significantly more omission and commission errors in CPT, and they showed lower accuracy in CBT compared to the normal group. The results of a correlational analysis showed that attention deficits in OSA are significantly correlated with arterial oxygen saturation among sub-indicators of polysomnograms. In conclusion, OSAs seems to be less attentive, having difficulties in response inhibition, and having deficiencies in noticing important environmental changes. Age seems to make these deficiencies even worse. Especially, the relationship between attention deficiency and hypoxia which could cause irreversible cerebrum damage has an implication in cognitive impairment prevention through early treatment.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.1
• /
• pp.45-66
• /
• 2015

This study explored the moderating effects of social supports (family support, home friends support, foreign friends support) and cultural identity (home identity, foreign identity) on the relationships of reverse culture shock and subjective well-being. Participants were 157 returnees who left home-country prior to the age of 19 and resided in the foreign-country for more than three years. The results of hierarchical regression analyses on two-way interaction effect between reverse culture shock and each hypothesized moderator (e.g., family support, home friends support, foreign friends support, home identity, foreign identity) indicated that reverse cultural shock and subjective well-being was negatively related and their relationship was moderated only by family support. Specifically, the relationship between reverse culture shock and subjective well-being was weaker when the level of family support was higher. Subsequently, three-way interaction among reverse culture shock, one of the social support factors, and one of the cultural identity factors was investigated using hierarchical regression analyses. The results showed that the three-way interaction among reverse culture shock, family support, and home identity was significant. The slope difference tests yielded that the relationship between reverse culture shock and subjective well-being was stronger when both levels of family support and home identity were lower compared to when either level of family support or home identity was higher. These results imply that environmental factors such as family support and intrapsychic factor such as home identity might function as a buffer against the negative consequences of reverse culture shock experience.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.290-290
• /
• 2022

Powdery mildew is known to be one of the serious diseases in C. moschata cultivation. Plants infected with powdery mildew cause damage to cultivation areas such as occurrence of deformity fruit and decrease in quantity. also, it has been reported that many farms have difficulties in controlling powdery mildew due to the outbreak under various conditions throughout the year. Therefore, this study intends to perform a phenotype test and a genotype test for C. moschata 60 lines grown in Jenong S&T. Podospareaxanthii, known as a pathogen that causes powder mildew disease in pumpkins in Korea, was collected and used as an inoculation source, phenotype test was performed by examining the infection area rate(%) of powdery mildew disease that occurred in leaves 25 days after inoculation. It was determined that 0% of the infection area rate was in the first stage, 1 to 5% in the second stage, 6 to 15% in the third stage, 16 to 30% in the fourth stage, and 31% or more in the fifth stage, The first and second stages were judged as resistance, the third as moderate resistance, and the fourth and fifth stages as sensitivity. As a result of the phenotype test, it was confirmed that the resistance was 21 points, moderate resistance was 14 points, and sensitivity was 25 points. After searching for the genes related to powdery mildew resistance resistance, pm-0, CmbHLH87, and LOC111453072, 21 points of resistance and 9 points of moderate resistance identified through phenotype tests were identified through gel electrophoresis after polymerase chain reaction(PCR) using 5 primers related to 3 genes. As a result of genotype testing of a total 30 points, the CmbHLH87 and LOC111453072 gene were found to be resistant bands in all points, PMR1 was identified as 20 points for resistance, 4 points for moderate resistance, and 6 points for sensitivity, PMR2 was not identified in the entire band, and PMR5 was identified as 18 point for resistance, 3 points for moderate resistance, and 9 points for sensitivity. As a result, when comparing the phenotype test results and genotype test results, CmbHLH87 and LOC111453072 genes was 100% consistent in resistance and moderate resistance, PMR1 was 95.2% in resistance, 44.4% in moderate resistance, and PMR5 was 90% in resistance and 33.3% in moderate resistance, PMR2 was not consistent in resistance and moderate resistance. Therefore, it is expected that more accurate PMR test will be possible by using molecular markers(PMR1, PMR5) and by developing CmbHLH87 and LOC111453072 gene-related molecular markers.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.11
• /
• pp.85-95
• /
• 2023

This study implemented intelligent compaction technology at the construction site of the AY Highway in Gyeonggi Province, with a focus on obtaining the representative intelligent compaction value, CMV. The target CMV for quality control was established through trial construction, and the validation of the compaction quality control process based on intelligent compaction was conducted. The optimal approach for determining the target CMV was confirmed to be through linear regression of the average CMV measured within a 5-m radius from the plate load testing location. Upon assessing compaction quality against the target CMV, it was observed that the quality criteria outlined in the domestic intelligent compaction standard were met. However, the criteria outlined in Austria and the United States were not satisfied. Notably, indicators related to the variability of compaction quality did not meet the specified criteria, suggesting a stringent standard compared to the observed variability of CMV, ranging from 17% to 55%. Consequently, it is recommended to conduct additional field tests to further validate the compaction quality control process based on intelligent compaction. This will aid in confirming and enhancing the appropriateness of the regulations stipulated in each standard.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.355-363
• /
• 2023

In safety assessment of a aged bridge, dynamic characteristics and displacement are directly related to the rigidity of the structural system, especially displacement is the most important factor as the physical quantity that the bridge user can directly detect. However, in order to measure the displacement of the bridge, it is difficult to install displacement sensors at the bottom of the bridge and conduct traffic blocking and loading tests, resulting in increased costs or impossible measurements depending on the bridge's environment. In this study, a method of measuring the displacement of a bridge using only accelerometers without installing displacement sensors and ambient vibration without a loading test was proposed. For the analysis of bridge dynamic characteristics and displacement using ambient vibration, the mode shape and natural frequency of the bridge were extracted using a TDD technique known to enable quick analysis with simple calculations, and the unit load displacement of the bridge was analyzed through flexibility analysis to calculate static displacement. To verify this proposed technology, an on-site test was conducted on C Bridge, and the results were compared with the measured values of the loading test and the structural analysis data. As a result, it was confirmed that the mode shape and natural frequency were 0.42 to 1.13 % error ratio, and the maximum displacement at the main span was 3.58 % error ratio. Therefore, the proposed technology can be used as a basis data for indirectly determine the safety of the bridge by comparing the amount of displacement compared to the design and analysis values by estimating the displacement of the bridge that could not be measured due to the difficulty of installing displacement sensors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.666-671
• /
• 2023

As international environmental regulations on ship emissions are gradually strengthened, interest in electric propulsion and hybrid propulsion ships is increasing, and various solutions are being developed and applied to these ships, especially stabilization of the power system and system efficiency. The direct current distribution system is being applied as a way to increase the power. In addition, verification and testing of safety and performance of marine DC distribution systems is required. As a result of establishing a DC distribution test bed, verifying the performance of the DC distribution (variable speed power generation) system, and analyzing fuel consumption, this study applied a variable speed power generation system that is applied to DC power distribution for ships, and converted the power output from the generator into a rectifier. A system was developed to convert direct current power to connect to the system and monitor and control these devices. Through tests using this DC distribution system, the maximum voltage was 751.5V and the minimum voltage was 731.4V, and the voltage fluctuation rate was 2.7%, confirming that the voltage is stably supplied within 3%, and a variable speed power generation system was installed according to load fluctuations. When applied, it was confirmed through testing that fuel consumption could be reduced by more than 20% depending on the section compared to the existing constant speed power generation system.

• Korean journal of applied entomology
• /
• v.62 no.4
• /
• pp.355-363
• /
• 2023

In addition to causing direct feeding damage to a variety of greenhouse crops, Frankliniella occidentalis also inflicts indirect harm by facilitating the transmission of the tomato spotted wilt virus. Historically, the prevention of F. occidentalis infestations has relied heavily on pesticide use. However, this approach has led to significant side effects in agricultural ecosystems, including the development of pest resistance and challenges in effective prevention. In response to these issues, research has been directed towards identifying alternative substances that circumvent the tolerance developed against chemical pesticides. Extracts from sixty-seven medicinal plants were prepared by soaking them in water for 24 hours at room temperature. These extracts were then applied to adult F. occidentalis, with particular attention to moutan extract treatment. This treatment demonstrated a 100% insecticidal effect on the first day. The moutan extract, specifically, was prepared using 50% ethanol, after which the ethanol and water were removed via a rotary evaporator. The resultant product was then lyophilized into a powder and used after being diluted with water. In indoor experiments, a 40% diluted solution was sprayed onto F. occidentalis, exhibiting a 100% insecticidal effect 24 hours post-treatment. Furthermore, a pot test indicated a 78% insecticidal effect on the first day of application. Ongoing research includes the analysis of active substances that demonstrate exceptional insecticidal properties and the conduct of on-site validation tests. The application of the aforementioned extract is anticipated to be effective in the prevention of F. occidentalis infestations.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.534-546
• /
• 2023

If the disc cutter is excessively worn or damaged, it becomes incapable of rotating and efficiently cutting rockmass. Therefore, it is important to appropriately manage the replacement cycle of the disc cutter based on its degree of wear. In general, the replacement cycle is determined based on the results of manual inspection. However, the manual measurements has issues related to worker safety and may lead to inaccurate measurement results. For these reasons, some foreign countries are developing the real-time measurement system of disc cutter wear by using different sensors. The ultrasonic sensors, eddy current sensors, magnetic sensors, and others are utilized for measuring the wear amount of disc cutters. In this study, the applicability of eddy current sensors for real-time measurement of wear amount in TBM disc cutters was evaluated. The distance measurement accuracy of the eddy current sensor was assessed through laboratory tests. In particular, the accuracy of eddy-current sensor was evaluated in various environmental conditions within the cutterhead chamber. In addition, the measurement accuracy of the eddy current sensor was validated using a 17-inch disc cutter.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.375-394
• /
• 2024

The extensive utilization of concrete has given rise to environmental concerns, specifically concerning the depletion of river sand. To address this issue, waste deposits can provide manufactured-sand (MS) as a substitute for river sand. The objective of this study is to explore the application of machine learning techniques to facilitate the production of manufactured-sand concrete (MSC) containing stone nano-powder through estimating the splitting tensile strength (STS) containing compressive strength of cement (CSC), tensile strength of cement (TSC), curing age (CA), maximum size of the crushed stone (Dmax), stone nano-powder content (SNC), fineness modulus of sand (FMS), water to cement ratio (W/C), sand ratio (SR), and slump (S). To achieve this goal, a total of 310 data points, encompassing nine influential factors affecting the mechanical properties of MSC, are collected through laboratory tests. Subsequently, the gathered dataset is divided into two subsets, one for training and the other for testing; comprising 90% (280 samples) and 10% (30 samples) of the total data, respectively. By employing the generated dataset, novel models were developed for evaluating the STS of MSC in relation to the nine input features. The analysis results revealed significant correlations between the CSC and the curing age CA with STS. Moreover, when delving into sensitivity analysis using an empirical model, it becomes apparent that parameters such as the FMS and the W/C exert minimal influence on the STS. We employed various loss functions to gauge the effectiveness and precision of our methodologies. Impressively, the outcomes of our devised models exhibited commendable accuracy and reliability, with all models displaying an R-squared value surpassing 0.75 and loss function values approaching insignificance. To further refine the estimation of STS for engineering endeavors, we also developed a user-friendly graphical interface for our machine learning models. These proposed models present a practical alternative to laborious, expensive, and complex laboratory techniques, thereby simplifying the production of mortar specimens.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.106-111
• /
• 2008

Six standard methods for marine ecotoxicological tests were established(or applicated) using marine decomposer, primary producers and consumers. Development processes referred to the standard methods established by USEPA(United States Environmental Protection Agency), international organizations and European methods. However, the standard test species were selected among the domestic species generally found in the Korean waters and sediments. The test methods provide the culture/maintenance of test species, test methods, reproducibility and quality acceptance criteria etc. A total of nine test species were designated including bioluminescent bacteria(Vibrio fischeri), diatom(Skeletonema costatum), seaweed(Ulva pertusa), rotifer(Brachionus plicatilis), benthic copepod(Tigriopus japonicus), benthic amphipods(Mandibulophoxus mai, Monocorophium acherusicum), and fishes(Oryzias latipes, Paralichthys olivaceus). These test species represent the decomposer, primary producer and consumers in marine trophic system in Korean coastal ecosystems, and we recommend the "battery test" including at least one species from the each trophic level for marine ecotoxicological test.