• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.49-57
• /
• 2022

This paper presents a study on the behavior of a bolted T-stub to square tube connection using Thread-fixed One-side Bolts (TOBs) through tests and numerical simulations. It outlines a research work of four connections with focus on the failure modes and strengths of the connection under tensile load. It was observed that the thread anchor failure caused by shear failure of hole threads controlled the final failure of the connection in the tests. Meanwhile, the out-of-plane deformation of tube wall resulted in the contact separation between hole threads and bolt threads, which in turn reduced the shear strength of hole threads. Finite element models (FEMs) allowing for the configuration details of the TOBs fixed connection are then developed and compared with the test results. Subsequently, the failure mechanism of hole threads and stress distribution of each component are analyzed based on FEM results. It was concluded that the ultimate strength of connection was not only concerned with the shear strength of hole threads, but also was influenced by the plastic out-of-plane deformation of tube wall. These studies lay a foundation for the establishment of suitable design methods of this type of connection.

• Geomechanics and Engineering
• /
• 제1권3호
• /
• pp.241-257
• /
• 2009

The one-dimensional compressibility of sand is an important property for the estimation of settlement or deformation of sand deposits. The $K_0$ value of sand is also an important design parameter. Experimental results are presented in this paper to study the compressibility of sand in $K_0$ consolidation tests. The $K_0$ consolidation tests were carried out using a triaxial cell and a plane-strain apparatus. Specimens prepared using both the moist tamping and the water sedimentation methods were tested. The testing data demonstrate that the type of testing apparatus does not affect the $K_0$ measurement if proper boundary conditions are imposed in the tests. The data also show that the compressibility and the $K_0$ value of loose sand specimens prepared using the moist tamping method are very sensitive to the variation of void ratio. The $K_0$ values measured from these tests do not agree with the $K_0$ values calculated from Jaky's equation. The compressibility and $K_0$ values of sand obtained from tests on specimens prepared using different preparation methods are different which may reflect the influence of soil fabrics or structures on the one dimensional compression behavior of sand.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.173-186
• /
• 2023

In order to prevent environmental pollution, initiatives to increase the sustainability of resources are supported by society. However, the performance of recycled materials does not generally match that of natural materials. This study looks into the use of geogrid to improve various types of recycled aggregates. For this purpose, five different recycled aggregates were created by recycling wastes from the construction industry. Besides, direct shear tests (DS tests) were carried out on these recycled aggregates to determine their shear strengths. Following that, a triaxial geogrid was placed in the recycled aggregates to provide reinforcement, and the DS tests were conducted on the reinforced recycled aggregates. The results of the tests were also compared to those of tests performed on natural aggregates (NA). In conclusion, it was found that the recycled aggregates have lower shear strengths than the NA. Nonetheless, when reinforced with geogrid, the shear strength of the recycled concrete aggregates (RCA) and construction and demolition wastes (CDW) exceeded that of the NA. Furthermore, the geogrid reinforcement increased the shear strength of the recycled crushed bricks (CB), though not to the level of the NA.

• 한국지반환경공학회 논문집
• /
• 제16권5호
• /
• pp.5-11
• /
• 2015

지하수 내에 영양염류와 중금속 등의 오염물질이 동시에 존재하는 경우 두 가지 이상의 반응성 매질을 적용한 연속식 반응벽체공법이 적용될 수 있다. 본 연구에서는 영양염류 오염물질인 암모늄과 인산염, 그리고 중금속인 카드뮴의 복합오염물질의 제거를 위해 제올라이트와 제강슬래그를 반응성 매질로 구성한 연속식 반응벽체공법의 적용성을 평가하였다. 흐름 조건을 모사한 주상실험을 수행하여 제올라이트와 제강슬래그와의 연속반응에 의한 오염물질의 제거효과를 평가하였다. 주상실험결과는 비평형 이류확산 모델을 적용하여 주상실험에서의 비평형 반응을 해석하였다. 주상실험을 통해 제올라이트는 암모늄 제거에 효과적이며 제강슬래그는 인산염과 카드뮴 제거에 효과적임을 확인하였으며, 연속식 반응벽체 구성 시 제올라이트와 제강슬래그 순서로 반응시키는 조건이 효과적인 것으로 나타났다.

• 가정과삶의질연구
• /
• 제22권1호
• /
• pp.55-64
• /
• 2004

The major purpose of this study was to investigate purchasing behavior of environmental products by Korean consumers, which will ultimately help foster sustainable consumption. Environmental consciousness, environmental behaviors, level of awareness of environmental products, and purchasing of environmental products were examined. Mean differences between purchasers and non-purchasers of environmental products were compared in terms of environmental consciousness and behaviors, and the level of awareness of environmental products. A survey was conducted on 310 consumers in the greater Seoul metropolitan area. The data were analyzed by frequencies, percentages, logistic regression, and t-tests using a variable for interval scale and a variable for nominal scale. There were significant mean differences between purchasers and non-purchasers of environmental products on three variables of environmental consciousness and behaviors. Those who were educated on environmental issues showed a higher preference in purchasing environmental products. Among socio-demographic variables, the income level was the only variable that showed a significant mean difference between the two groups. Also, there was a remarkable difference in purchasing behavior between the two groups. For the purchasers of environmental products, the purchasing decisions took into account environment-friendliness of products. Non-purchasers of environmental products put more emphasis on price or quality of products. The results of the logistic regression analysis indicated that those who had higher education, who viewed environmental pollution as a serious problem, and who are more cognizant of the environmental labeling tend to purchase more environmental products.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.504-511
• /
• 2000

Geotube is a tube made of permeable but soil-tight geotextile, hydraulically filled with soil include dredged sand and mud, which has been successfully applied in hydraulic and coastal engineering projects. This method is getting popular and used a lot in the advanced countries of the world because of economical, useful, and enable to store and isolate contaminated materials as obtained by harbor dredging. Laboratory and pilot scale in-situ tests were performed to determine the design methodology and construction procedures. From the results of laboratory and in-situ model tests, the retention ratio of solid particle is minimum 86% and minimum permeability and tensile strength of geotextile is ${\alpha}$${\times}$10$\^$-2/ and 20 t/m, respectively. Also, based on the environmental model test results, it can be concluded that this method does meet the Korean EPA standards.

• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.565-582
• /
• 2008

This paper presents a feasibility study of flexible piezoelectric paint for use in wide-band low-profile surface-mount or embeddable ultrasonic sensor for in situ structural health monitoring. Piezoelectric paint is a piezoelectric composite with 0-3 connectivity. Because of its ease of application, piezoelectric paint can be readily fabricated into sensing element with complex pattern. This study examines the characteristics of piezoelectric paint in acoustic emission signal and ultrasonic guided wave sensing. A series of ultrasonic tests including pitch catch and pencil break tests were performed to validate the ultrasonic wave sensing capability of piezoelectric paint. The results of finite element simulation of ultrasonic wave propagation, and acoustic emission generated by a pencil lead break on an aluminum plate are also presented in this paper along with corresponding experimental data. Based on the preliminary experimental results, the piezoelectric paint appears to offer a promising sensing material for use in real-time monitoring of crack initiation and propagation in both metallic and composite structures.

• 한국지반환경공학회 논문집
• /
• 제7권5호
• /
• pp.67-77
• /
• 2006

성토지반의 지지력을 향상시키기 위하여 지반개량이나 다짐과 같은 일반적인 방법들이 많이 이용되고 있다. 하지만, 최근에는 내구성이 크고 강한 합성수지와 같은 재료들이 개발되어 실용화됨으로서, 보강토공법이 널리 적용되고 있는 실정이다. 본 연구에서는 한층의 지오텍스타일로 보강된 모래지반상의 대상기초에 대한 모형실험을 평면변형률 상태에서 실시하여, 지오텍스타일의 설치위치와 길이, 강도의 변화에 따른 지지력의 증대효과와 지반의 거동을 관찰하였다.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.267-281
• /
• 2015

Six full-scale prestressed concrete (PC) I-beams with steel fibers were tested to failure in this work. Beams were cast without any traditional transverse steel reinforcement. The main objective of the study was to determine the effects of two variables-the shear-span-to-depth ratio and steel fiber dosage, on the web-shear and flexural-shear modes of beam failure. The beams were subjected to concentrated vertical loads up to their maximum shear or moment capacity using four hydraulic actuators in load and displacement control mode. During the load tests, vertical deflections and displacements at several critical points on the web in the end zone of the beams were measured. From the load tests, it was observed that the shear capacities of the beams increased significantly due to the addition of steel fibers in concrete. Complete replacement of traditional shear reinforcement with steel fibers also increased the ductility and energy dissipation capacity of the PC I-beams.

• 대한인간공학회지
• /
• 제29권4호
• /
• pp.473-478
• /
• 2010

For the medical approaches of work-related musculoskeletal diseases, it is important to consider occupational relatedness and occupational fitness. Clinical approach includes physical examination, radiologic tests and other related tests and we should choose proper management which is suitable to workers' status for the prevention of early disease's progression and later disabilities. Also, it suggests that occupational prevention program consultation for work-related musculoskeletal diseases considering workers' variable circumstances should be done via occupational relatedness and occupational fitness.