• International Commerce and Information Review
• /
• v.12 no.3
• /
• pp.311-332
• /
• 2010

This study investigate the effects of environmental and organizational characteristics on e-business competence and the influence of e-business competence on export performance in the small and medium sized firms. The development of the research model is based on the literature of e-business and the empirical studies of information technology competence. The data from the survey was analyzed using Partial Least Squares(PLS). The results from the empirical model suggest that e-business competence is affected by environmental uncertainty and market diversity as well as top management support and learning orientation. And, export performance is enhanced by e-business competence.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.511-518
• /
• 2000

Characteristics of joint orientation, length, spacing and their distribution are very important factors for slope stability, Especially, the effect of joint spacing is an essential factor of slope stability. This study is to analyze the effect of joint spacing in cases of sliding and toppling, which is a typical failure mode. Joint spacing can divided into vertical spacing(spacing) and horizontal spacing(gap). And then, the spacing/length ratio of joint directly affect rock slope failure. When the ratio is below 0.05, the possibility of failure is rapidly increased. In case of toppling, the possibility of failure depends on the ratio of spacing to height of slope ratio slope. As the ratio decreases, the possibility of toppling failure increased. The critical ratio of spacing to height of slope is determined by the dip angle of the slope and the orientation of joint sets.

• Hwankyungkyoyuk
• /
• v.9 no.1
• /
• pp.17-29
• /
• 1996

'Control of Locus of Reinforcement(LOCR)' is considered one of the main important factors on responsible environmental behaviors(REB). It is defined as 'an individual's perception of his or her ability to bring about change through his or her behavior'. This phychological construct is divided in two, external locus and internal locus. Internal locus of reinforcement is important as predictor for REB. Lately, 'The Environmental Action Internal Control Index:EAICI' was developed. It is a valid and reliable instrument to measure relationships of two variables. The purposes of this study were to analyse the orientation of LOCR in high school students and relations with LOCR to REB. By the results, EAICI scores of total students, males, females are 99.83, 95.10, 104.56, respectively. LOCR of females was stronger and more internal than one of males. The item scores for behaviors that reduce the amount of household trash by reusing and recycling and convince someone to do this are 4.31, 4.05, respectively. The item scores for behaviors that convince someone to sign a petition regarding on environmental issues, convince someone to reuse envelopes by putting a label over the old address and convince someone to keep car tires properly inflated are 3.09, 3.09, 3.04, respectively. It shows that EAICI scores are dependent upon the degree of the chances and experiences to meet the various environmental events.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.125-132
• /
• 2016

This study intended to exploratively depict the influence of interaction between Environmental Uncertainty and Learning Orientation of Korean IT companies on Marketing Capability which was adopted as one of the organizational performance indicator. Statistical Results based on AMOS and SPSS showed that smaller-sized companies under 500 employees are more inclined to desperately and flexibly meet and adapt to their environmental uncertainty, resulting positive performance, that is, marketing capabilities. On the other hand, larger-sized companies over 500 employees showed no significant interaction effect. This result of the study induces the reasoning that the differences in competitive environment and market leadership accrued by organizational size may also incur differences in environmental adaptive mechanism. However, this reasoning can have some limitation in that the types and traits of IT firms are so different. Therefore, this topic suggests the necessity of follow-up researches using enlarged samples in IT industry and comparative studies in other industries.

• Proceedings of the Petrological Society of Korea Conference
• /
• 2006.05a
• /
• pp.60-60
• /
• 2006

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.231-241
• /
• 2019

Kinematic analysis determines the stability of rock slope by analyzing the relationship between the slope face orientation and the discontinuity orientation. In this study, terrestrial LiDAR was used to obtain a large amount of discontinuity orientation data and then, the probabilistic characteristics of the orientation data obtained using terrestrial LiDAR were analyzed. Subsequently, the probabilistic kinematic analysis was carried out using the discontinuity orientations generated randomly from Fisher function in Monte Carlo simulation. In addition, the probabilistic kinematic analysis was also performed using the actual orientation data obtained from the terrestrial LiDAR to compare their results. Consequently, the results of both probabilistic analyses showed similar results. Therefore, if sufficient orientation data are provided by other means such as terrestrial LiDAR, the probabilistic analysis will show reasonable results using the actual field data without randomly generating orientation data. In addition, the deterministic kinematic analysis was also carried out using representative orientation of discontinuity sets. The analysis result of the probabilistic analysis showed similar results with the deterministic analysis because the dispersion of the discontinuity orientations in a joint set is not large.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.293-300
• /
• 2023

The Shape Preferred Orientation (SPO) method has been used to analyze the orientation of fault motion, which is utilized as basic data for fault kinematics studies. The rigid grains, which as quartz, feldspar, and rock fragments, in the fault gouge are arranged in the P-shear direction through rigid body rotation by a given shear stress. Using this characteristic, the fault motion can be estimated from the SPO inversely. Recently, a method for securing precision and reliability by measuring 3D-SPO using X-ray CT images and examining the shape of a large number of particles in a short time has been developed. As a result, the SPO method analyzes the orientation of thousands to tens of thousands of particles at high speed, suggests the direction of fault motion, and provides easy accessibility and reliable data. In addition, the shape information and orientation distribution data of particles, which are by-products obtained in the SPO analysis process, are expected to be used as basic data for conducting various studies such as the local deformation of fault rocks and the fault generation mechanism.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.165-178
• /
• 2022

The purpose of this study is to empirically analyze and provide implications for the impact on performance, focusing on Environmental Sustainability, innovation orientation, and integrated activities among the factors necessary for sustainable management of SMEs. 366 copies obtained from executives and representatives above the department head level of domestic manufacturing SMEs through professional research companies were used for the final analysis, and the research hypothesis was verified using SmartPLS 3.0 and SPSS 25. As a result of the analysis, it was confirmed that Environmental Sustainability had a significant effect on social integration and technology integration, and innovation orientation had a significant effect on social integration and technology integration. In addition, it was confirmed that social integration and technology integration factors had a significant effect on the sustainability performance of SMEs. Based on these research results, theoretical, practical, and future research directions could be presented. According to the results of this study, it can be expected that manufacturing SMEs will be able to receive help in establishing strategies related to innovation orientation, social integration, and technology integration to achieve sustainable performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.465-472
• /
• 2019

The SPR (Single Photo Resection) is widely used as a method of estimating the EOPs (Exterior Orientation parameters) at the time of taking a photograph, but it requires an initial value and has a disadvantage of being sensitive to the initial value. In this study, we introduce quaternion-based single photo resection and PnP (Perspective-n-Point) algorithm that do not require initial values and compare the results. Photos were taken using a general smartphone, and the ground control point acquisition was based on the hybrid MMS (Mobile Mapping System) point cloud data possessed by the researchers. As a result, when the collinear condition based SPR is true value, quaternion-based SPR has higher attitude angle estimation accuracy than PnP algorithm. In case of camera position estimation, both algorithms showed accuracy within 0.8m when compared with ground control points.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.175-181
• /
• 2006

Hybrid process of thermally-induced phase separation and stretching was developed for the preparation of microporous polypropylene hollow fiber membranes. Precursor for stretching was prepared by using soybean oil as a diluent and benzoic acid as a nucleating agent far the sphenlite control and it was stretched far the micrporous hollow fiber membrane. The effects of stretching ratio and deformation rate for stretching process were investigated. Increase of stretching ratio resulted in the greater pore size with nonuniform size distribution. Higher deformation rate also increaser the pore size with uniform size distribution. Stretching ratio was closely related with the orientation of polymer chain and increased the mechanical strength of the fiber. Increase of deformation rate had little effects on the orientation of crystalline phase, and decreased the orientation of amorphous phase which caused the decrease of tensile strength of the fiber and broke the micro-fibrils connecting spherulites to form a circular pore shape.