• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.219-226
• /
• 2013

Organic semiconductor-based soft electronics has potential advantages for next-generation electronics and displays, which request mobile convenience, flexibility, light-weight, large area, etc. Organic field-effect transistors (OFET) are core elements for soft electronic applications, such as e-paper, e-book, smart card, RFID tag, photovoltaics, portable computer, sensor, memory, etc. An optimal multi-layered structure of organic semiconductor, insulator, and electrodes is required to achieve high-performance OFET. Since most organic semiconductors are self-assembled structures with weak van der Waals forces during film formation, their crystalline structures and orientation are significantly affected by environmental conditions, specifically, substrate properties of surface energy and roughness, changing the corresponding OFET. Organo-compatible insulators and surface treatments can induce the crystal structure and orientation of solution- or vacuum-processable organic semiconductors preferential to the charge-carrier transport in OFET.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.659-672
• /
• 1997

Thermal response induced from nonlinear temperature distribution in composite box gilder bridges depends on several variables(environmental conditions, physical and material properties, location and orientation of bridge, and cross-section geometry). In this paper, parametric study are conducted in order to find the effects of variations of seasons, location and orientation of bridge, sectional geometry and some material properties on the axial deformation, curvature and stresses in composite box girder bridge. A two-dimensional transient finite element model to conduct this parametric studies is briefly presented. Firstly, the effects of the parameters on the diurnal variation of curvature are considered, and for the time of maximum curvature, on the distribution of temperature and stresses of composite box girder sectional are considered. Finally, some considerations about the influence of the parameters on the daily maximum values of axial deformation, curvature and stresses are carried out. The influence of thermal effect on structures is important as much as the influence of live or dead load in some cases. In the design of steel composite bridges, the thermal stresses calculated on the supposition that the temperature difference between the concrete slab and steel girder is $10^{\circ}C$ and the temperature distributions are uniform in concrete slab and steel girder can be underestimated.

• Radiation Oncology Journal
• /
• v.23 no.4
• /
• pp.201-210
• /
• 2005

Purpose: Quality of life in patients with cancer may be influenced by various kinds of variables, such as personal, environmental, and medical factors. The purpose of this study was to identity the influencing factors on the quality of life in patients with cancer. Materials and Methods: One hundred and forty seven patients, who were taking medical therapy or following up after surgery for cervix cancer, participated in the present study. Quality of life, medical variables (cancer stage, types of treatment, follow-up status, and symptom distress), and psychosocial variables (mood disturbance, orientation to life, and social support) were measured. The obtained data were computed using multiple regression analyses. Results: The medical-and-psychosocial variables explained 63.3% of the total variance in the quality of life ($R^2=0.633$ F:16.959, p=.000). Cancer stage, symptom distress, mood disturbance, social support(family), and optimistic orientation to life were significant factors influencing on the quality of life in patients with cervix cancer. Conclusion: An integrative care program which includes medical - and - psychosocial characteristics of patients is essential to improve quality of life in patients with cervix cancer.

• Journal of Korea Water Resources Association
• /
• v.38 no.5 s.154
• /
• pp.379-390
• /
• 2005

This study is to trace the change of stream shape using the past series of aortal photographs and topographic maps, and to compare the land use changes of inland along the stream. For the Gyeongan first & second class of local stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho photographs were made with interior orientation and exterior orientation, respectively. In addition, topographic maps of 1914 - 1915 were used to compare with stream of 1966, 1981 and 2000. As apparent changes of the stream, the consolidated reaches of stream with levee construction were straightened and their stream width widened. Especially the stream width of inlet part of Paldang lake was widened almost twice because of the rise of water level by dam construction in 1974. The land use maps (1966, 1981, 2000) of riparian areas were also made, respectively and classified into 6 categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing, The main changes of land use were agricultural land, urban area, road and sandbar.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.245-251
• /
• 2019

Sonar bearing accuracy is the correspondence between the target orientation predicted by sonar and actual target orientation, and is obtained from measurements. However, when measuring sonar bearing accuracy, many errors are included in the results because they are made at sea, where complex and diverse environmental factors are applied. In particular, parallax error caused by the difference between the position of the GPS receiver and the sonar sensor, and the time delay error generated between the speed of underwater sound waves and the speed of electromagnetic waves in the air have a great influence on the accuracy. Correcting these parallax errors and time delay errors without an automated tool is a laborious task. Therefore, in this study, we propose a sonar bearing accuracy measurement equipment with parallax error and time delay error correction. The tests were carried out through simulation data and real data. As a result of the test it was confirmed that the parallax error and time delay error were systematically corrected so that 51.7% for simulation data and more than 18.5% for real data. The proposed method is expected to improve the efficiency and accuracy of sonar system detection performance verification in the future.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.69-76
• /
• 2009

We report an implementation of the Ground Penetrating Radar (GPR) survey at a site that corresponds to a ruined castle. The objective of the survey was to characterise buried archaeological structures such as walls and tiles in Van Khan Tooril's Ruin, Mongolia, by 2D and 3D GPR techniques. GPR datasets were acquired in an area 10mby 9 m, with 10 cm line spacing. Two datasets were collected, using GPR with 500MHz and 800MHz frequency antennas. In this paper, we report the use of instantaneous parameters to detect archaeological targets such as tile, brick, and masonry by polarimetric GPR. Radar polarimetry is an advanced technology for extraction of target scattering characteristics. It gives us much more information about the size, shape, orientation, and surface condition of radar targets. We focused our interpretation on the strongest reflections. The image is enhanced by the use of instantaneous parameters. Judging by the shape and the width of the reflections, it is clear that moderate to high intensity response in instantaneous amplitude corresponds to brick and tiles. The instantaneous phase map gave information about the location of the targets, which appeared as discontinuities in the signal. In order to increase our ability to interpret these archaeological targets, we compared the GPR datasets acquired in two orthogonal survey directions. A good correlation is observed for the alignments of reflections when we compare the two datasets. However, more reflections appear in the north-south survey direction than in the west-east direction. This is due to the electric field orientation, which is in the horizontal plane for north-south survey directions and the horizontally polarised component of the backscattered high energy is recorded.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2022

Mantle heterogeneity is closely related to the distribution and circulation of volatile components in the Earth's interior, and the behavior of volatiles in the mantle strongly influences the rheological properties of silicate rocks. In mantle xenoliths, these physicochemical properties of the upper mantle can be recorded in the form of microstructures and fluid inclusions. In this paper, I summarized and reviewed the results of previous studies related to the characteristics of microstructures and fluid inclusions from peridotite xenoliths beneath the Rio Grande Rift (RGR) in order to understand the evolution and heterogeneity of upper mantle. In the RGR, the mantle peridotites are mainly reported in the rift axis (EB: Elephant Butte, KB: Kilbourne Hole) and rift flank (AD: Adam's Diggings) regions. In the case of the former (EB and KB peridotites), the type-A lattice preferred orientation (LPO), formed under low-stress and low-water content, was reported. In the case of the latter (AD peridotites), the type-C LPO, formed under low-stress and high-water content, was reported. In particular, in the case of AD peridotites, at least two fluid infiltration events, such as early (type-1: CO₂-N₂) and late (type-2: CO₂-H₂O), have been recorded in orthopyroxene. The upper mantle heterogeneity recorded by these microstructures and fluid inclusions is considered to be due to the interaction between the North American plate and the Farallon plate.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.47-54
• /
• 2014

Purpose - The postponement strategy, which delays the form, place, and production of products as late as possible, has been widely considered as a competitive supply chain management scheme in an era of mass customization and modular manufacturing. An interesting business phenomenon is that not all manufacturing/logistics firms choose the postponement strategy. Given that postponement is a counter-measure to speculation, which has some advantages under certain environments, the current imprudent inclination toward the postponement strategy may cause firms to lose the potential of the speculation strategy, an alternative strategy in supply chain management. Building on the logistics and manufacturing literature, this study examines characteristics of two contrasting strategies, postponement and speculation, and major factors favoring each strategy. Research design, data, and methodology - We apply the profiling approach to two business cases, HP printer and LG mobile phone. The profiling approach is a method of choosing a particular strategy aligned with environmental factors. While various approaches have been used to check the fit between a business strategy and environmental factors, the literature on manufacturing strategy and logistics has commonly adopted the profiling approach. Major factors used in profiling variables are derived from the literature. Two samples, HP printer and LG mobile phone, are selected, because they represent major characteristics appropriate for each strategy. The profiling is based on data from semi-organized interviews with managers. Results - The profiling approach shows that the postponement strategy is a suitable one for HP printers. Most factors, such as product life cycle, large production volume, low-price, product value, and monetary density, support delaying end products until as late as possible. Despite some exceptions, such as delivery time and economy of scale, our analysis states that the overall profile of HP printer is favorable for the postponement strategy. On the other hand, LG mobile phone may adapt the speculation strategy. Although it has large production volume and low delivery frequency, most characteristics support the speculation strategy for this product. An interesting finding is that, despite common perception that advanced technology products such as mobile telephones favor the postponement strategy, profiling proposes the speculation strategy for this product. Conclusions - Our analysis shows that speculation is not the universal option for supply chain management, and that, when choosing a specific strategy, one should consider many factors simultaneously. A major implication of our work is to emphasize the role of environmental factors such as supply chain variables in choosing an inventory strategy, and the importance of fit rather than solely strategic orientation. A theoretical contribution is to demonstrate the benefit of the simultaneous consideration of business variables in choosing specific strategies. For practitioners, our work leads us to consider the existence and the potential of speculation as a counter-measure to postponement. In addition, the comprehensive framework in this research may be instantly used in examining a practical strategy.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2012

The purpose of this work is to gain a better understanding of the interrelationships between geological structures and slope failure in sedimentary rocks. In the studied slopes, construction-related slope failure could only be observed on the south-dipping slopes. This indicates that slope stability may be dependent on the angular relationships between the dip direction of bedding and the orientation of the slope. Slope failure continued, post-construction, around large fault zones in the studied outcrop; these fault damage zones are, however, not easily recognized in the field. Here we suggest a new method that uses accumulated fracture density to precisely identify fault damage zones. Multiple-faced slopes are now increasingly being exposed during large-scale construction projects in South Korea. This multiple-faced slope analysis indicates that the stability of a slope should be evaluated by identifying domains, through the analysis of possible slopes and their angular relationships with bedding and other discontinuities, prior to construction. Therefore, careful consideration of geological structures such as bedding and other discontinuities, and their angular relationships during the design of cuttings through sedimentary rocks, will increase the efficiency of construction and enable the safe construction of more stable slopes that will retain their stability after construction.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2215-2226
• /
• 2000

Adsorption characteristics for homologous xanthates on quartz surface has been investigated by FT-IR spectroscopy to understand the adsorption mechanism in relation with verification of the influence of surfactants on the stability of hydrophilic suspended solids in aqueous system. Contact angle measurement for water droplets on quartz surface treated with xanthate was also conducted as a supplementary study for spectroscopic investigation to grant a reliability to the interpretation of experimental results. It has been observed that monolayer of ethyl xanthate was formed on quartz surface as the adsorption progressed and double layer of ethyl xanthate was formed eventually through the reverse oriented adsorption of xanthate molecules on the monolayer. Similar trend of adsorption to the case of ethyl xanthate was found for propyl and butyl xanthates and adsorption was observed to occur more rapidly as the number of carbon atom in alkyl group of xanthate homologs increased. Thermodynamic aspect of adsorption was discussed using Young's equation and the variation in adsorption rate was examined according to the concentration of ethyl xanthate. Based on the result, it has been concluded that the adsorption features of surfactant on substrate in aquatic system is governed by molecular structure and concentration of surfactant and its residual time in aqueous environment as dissolved state also influences greatly the stability of hydrophilic suspended particles.