• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.73-76
• /
• 2009

LCA is nowadays getting popular as a tool to assess the environmental impacts. We can assess the environmental impacts of products and also compare the environmental performance between products with LCA. Furthermore, the LCA results can be used for designing eco-friendly products. But LCA needs an enormous amount of data collection, calculations of energy and material balance. which required to spend pretty much time and cost. However, If we use Input-Output Analysis, There is a lot of advantages that we can save time and cost to calculate and also analyze energy-material balance more comprehensively. Therefore, we implemented the fundamental research of the environmental impact assessment on railway system using life cycle inventory analysis and Input-Output Analysis method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.24-27
• /
• 2002

The environmental problems by using coolant demanded the new cooling methods. As one of them, the studies on the finding with compressed cold air and oil mist have been done. The cooling method using compressed cold air was effective through going down the temperature of compressed air supplied below $-25^{\circ}$ and increasing the amount of compressed cold air, but had not enough cooling effect due to the low performance of lubrication. Therefore, the cooling methods using oil mist newly were suggested. This method can satisfy both cooling effect and lubrication with only small amount of coolant, also have the benefit in the point of decreasing the environmental pollution. This paper focused on analyzing the grinding characteristics of the cooling method using oil mist. The grinding test according to compressed cold air, oil mist spray pressure and oil mist supply direction were done.

• Journal of the Korea Furniture Society
• /
• v.22 no.1
• /
• pp.72-81
• /
• 2011

These days, beds have been developed not as furniture to sleep in but Healthcare Furniture. The function of heating, non-electronic-waves and far-infrared rays have been added. Also, eco-friendly materials such as stone, mud, rubber and wood are combined to them together with the radiation-heating method using heat conduction through electronic coil and hot water circulation. Modern people suffer from stress and fatigue. The hot issue is "health." Focused on the health, the development of design for beds considering the influence electronic waves, anions, deep sleep and the density of toxic materials have on human bodies has become urgent. In this study, the trend, specification and efficiency of the functional health-related electronic coil technology are analyzed. Through the analysis, the environmental standards are set. According to them, technology, eco-friendly materials and additional functions for the development of the design are considered. Also, the government is promoting the IEC international standardization for the Korean traditional floor heating style beds. In preparation for that, we adopted new HPT method technology. It enables non-electronic-waves, low electricity and stable temperature maintenance control for the warm top and the cool bottom. Also, the head boards and the frames of the beds can be separated. Through this separation, the beds can be easily moved or installed. Eco-friendly materials such as Hinoki cypress wood and red clay and the existing tables function are combined to the head boards so they can be used as drawers and display shelves. If they are used as separate items, they can be used as covers. This is how we suggest the design for the heating beds.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.206-213
• /
• 2019

Purpose: This study aims to develop eco - friendly paving materials using Sawdust and EPDM chips. Method: Materials are eco-friendly materials and have no environmental problems. By using EPDM chip, the walking feeling can be increased. Results: In this study, the optimum mixing ratio was calculated through mixing design test. Based on the blending ratio, the surface layer of the sidewalk is made of fine sawdust and EPDM chips. We used only sawdust of grain - 107 -size to make the base layer of the sidewalks and the surface layer of the bicycle road with the permeability and the anti - resilience, and suggested the application method through the test construction. Conclusion: This study the expected that the recent efforts of the government to reduce the elastic paving material, which is the environmentally harmful problem with the complete eco-friendly paving material, are expected to revive.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.588-591
• /
• 2004

Recently as people's values are changing from development into quality of life, the needs of environmentally friendly construction are gradually increasing, also popular discontent about the construction pollution such as the noise and vibration cause by construction machinery is increasing. Even though it is impossible to eliminate construction pollution fully, it is necessary to make efforts to reduce construction pollution to a minimum. The first step solving these matters is that the necessary sum of expense must be secured as the environmental budgeting method regarding Environmental management costs. To provide an efficient budgeting method, a interview with the person in charge of environment management was conducted. and the environmental management costs were analyzed through the historical data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.499-504
• /
• 2012

The high-speed train enjoys widespread acceptance as environment-friendly means of medium- to long-distance transportation. The pursuit of higher speed and lighter weight in railroad vehicles has engendered higher noise level. In particular, the environmental noise places many restrictions in the operation of high-speed railroad vehicles. This research investigates the effect of installing a skirt onto a high-speed train bogie with the top speed of 400 km/hr and using High Speed EMU for the purpose of reducing the environmental noise. In order to analyze the effect of the interior noise and environmental noise due to installation of the skirt, sound level is calculated using the Ray method and Statical Energy Analysis method. The numerical calculation predicts a reduction of approximately 2 dB in the environmental noise level, but at the cost of increase of approximately 2.5 dB in the interior noise level of the vehicle.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.4
• /
• pp.375-383
• /
• 2020

BACKGROUND: Bisphenol A (BPA) is a chemical widely used in polycarbonate plastics, epoxy resins. BPA is an endocrine disruptor. Residue of BPA in agricultural environments is a major concern. The objective of this study was to understand the characteristics of the uptake and distribution of BPA and its metabolites introduced into the agricultural environment to crops, and to use it as basic data for further research on reduction of BPA in agricultural products. METHODS AND RESULTS: This study established the analysis method of BPA and its metabolites in soil and crops, and estimated the intake of BPA and its metabolites from lettuce (Lactuca sativa) grown in sandy loam and loam soil, which are representative soils in Korea. The two major metabolites of BPA were 4-hydroxyacetophenone (4-HAP) and 4-hydroxybenzoic acid (4-HBA). BPA, 4-HAP and 4-HBA have been analyzed by using liquid chromatography tandem mass spectrometry (LC-MS/MS). These substances were detected in sandy loam and loam soil, indicating that certain portions of BPA were converted to 4-HAP and 4-HBA in the soil; however, it was observed that only 4-HBA migrated to lettuce through the roots into crops. CONCLUSION: The uptake residues showed the BPA and 4-HAP were not detected in lettuces grown on sandy loam (SL) and loam (L) soil treatments that were applied with of 10 ng/g, 50 ng/kg and 500 ng/g of BPA. However, the 4-HBA was detected at the level of 7 ng/g and 11 ng/g in the lettuce grown in sandy loam and loam soil that were treated with the 500 ng/g of BPA, respectively, while the 8 ng/g of 4-HBA was measured in the lettuce cultivated in the loam that was treated with 100 ng/g of BPA. This result presents that the BPA persisting in the soil of the pot was absorbed through the lettuce roots and then distributed in the lettuce leaves at the converted form of 4-HBA, what is the oxidative metabolite of BPA.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.48-54
• /
• 2009

Structures to support against slop failures or resist earth pressure like masonry retaining walls or retaining walls have continued to advance and evolve to new eco-friendly, easy-to-construct, crib retaining walls with varied forms and construction methods, meeting the needs of the times. Researches until now, however, have focused on the analyses of site displacement or stability of the whole site including structures like retaining walls, and thus, researches on rational design or method for stability analysis are lacking. Therefore, this study was conducted on a number of stability analyses, such as the visual power line or stability on sliding, being presented for bin walls, which enable vegetation to grow and were developed and applied in varied forms, meeting the development demands for eco-friendly retaining wall structures. This study compared the results of stability analyses, determined their feasibility, and evaluated their stability according to the height and facade slope of retaining walls. According to the results of this study, traditional masonry retaining wall analysis showed rather conservative stability evaluation results in the stability evaluation of bin walls, and the method using the visual power line seems to be objective because it produced similar results to the stability evaluation method on sliding or turnover.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.80-90
• /
• 2000

This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. Since the end of 20th century, the native ecology and landscape of Japan remained only a limited areas such as stream side, water side and forest areas. Therefore, recently the works of forest conservation and erosion control of environmental restoration on stream side tended to increased. The strategic prospects of environmental restoration in Japan were summarized as follows : 1. From the ecological point of view, we have to develop a certain method and technology in construction of forest conservation and erosion control to prevent environmental problem from erosion control works. 2. We have to restore not only a continuity of stream side forest from a primitive area to an estuary but also the stream side forest to preserve and restore a stream side vegetation on a primitive watershed areas. 3. We have to improve a method of construction or removal of a structure which were constructed in the stream to restore a water side environment and an interaction system for an integration on a forest land, stream, and erosion control. Additionally, we have to establish an integrated evaluation method and an enforcement system after investigation of influences on natural environment, stream, and forest etc. 4. We have to conduct an integrated research to investigate the ecosystem of stream side, and construct environmentally friendly water park and erosion control park which considered natural environment and its landscape. Additionally, we need to introduce and adopt a natural style stream construction method to restore a water side areas.

• Journal of Agricultural Extension & Community Development
• /
• v.16 no.4
• /
• pp.687-711
• /
• 2009

Recently, environmental-friendly agriculture (EFA) has been pointed out as an alternative for the change of our agricultural conditions. But the excessive amount of nutrients have been used to farmland since 1960s, when the intensive farming method called "High-Input, High-Yield" was expanded in earnest. This study was conducted to examine and compare farmers' purchasing and using fertilizer. For these purpose, data were gathered from a total of 326 farmers of the nation wide (greenhouse horticulture 60, upland cultivating 177, fruit-growing 89). The findings were as follows: First, 70.6% of greenhouse horticulture farmers, 89% of upland-cultivating farmers, 76.3% of fruit-growing farmers purchased fertilizer in Nong-hyup (farmers' cooperative organization). Second, only 54.2% of the greenhouse horticulture farmers, 60.2% of the upland cultivating farmers and 70.4% of the fruit-growing farmers recognized the optimum level of fertilizer. So, governmental organizations and agricultural technology center should carry out various programs for informing the farmers of the right way to use fertilizer and to practice EFA.