• 한국환경과학회지
• /
• 제8권5호
• /
• pp.575-586
• /
• 1999

From the environmental aspects, primary productivity of phytoplankton plays the most improtant role in enhancement of marine culture oyster production. This study may be divided into two branches; one is estimation of maximum oyster meat production per unit facility(Carrying Capacity) under the present enviromental conditions in Kamak Bay, the other is improvement of carrying from increase of primary productivity by changing the environmental conditions that cause not ot form an unfavorable environment such as the formation of oxygen deficient water mass using the eco-hydrodynamic model. By simulation of three-dimensional hydrdynamic model and ecosystem model, the comparison between observed and computed data showed good agreement. The results of sensitivity analysis showed that phytoplankton maximum growth rate was the most important parameter for phytoplankton and dissolved oxygen. The estimation of mean primary productivity of Wonpo, Kamak, Pyongsa, and Kunnae culture grounds in Kamak Bay during culturing period were 3.73gC/$m^2$/d, 2.12gC/$m^2$/d, 1.98gC/$m^2$/d, and 1.26gC/$m^2$/d, respectively. Under condition not ot form the oxygen deficient water mass, four times increasing of pollutants loading as much as the present loading from river increased mean primary productivity of whole culture grounds to 4.02gC/$m^2$/d. Sediment N, P fluxes that allowed for 35% increasing from the present conditions increased mean primary productivity of whole culture grounds to 3.65gC/$m^2$/d. Finally, ten times increasing of boundary loadings from the present conditions increased mean primary productivity of whole culture grounds to 3.95gC/$m^2$/d. The maximum oyster meat production per year and that of unit facility in actual oyster culture grounds under the present conditions were 6,929ton and 0.93ton, respectively. This 0.93ton/unit facility is considered to be the carrying capacity in study area, and if the primary productivity is increased by changing the environmental conditions, oyster production can be increased.

• Steel and Composite Structures
• /
• 제31권5호
• /
• pp.453-467
• /
• 2019

Portal frame structures, made up of cold-formed steel trusses, are increasingly being used for lightweight building construction. A novel pin-jointed moment connector, called the Howick Rivet Connector (HRC), was developed and tested previously in T-joints and truss assemblage to determine its reliable strength, stiffness and moment resisting capacity. This paper presents an experimental study on the HRC, in moment resisting cold-formed steel trusses. The connection method is devised where intersecting truss members are confined by a gusset connected by HRCs to create a rigid moment connection. In total, three large scale experiments were conducted to determine the elastic capacity and cyclic behaviour of the gusseted truss moment connection comprising HRC connectors. Theoretical failure loads were also calculated and compared against the experimental failure loads. Results show that the HRCs work effectively at carrying high shear loads between the members of the truss, enabling rigid behaviour to be developed and giving elastic behaviour without tilting up to a defined yield point. An extended gusset connection has been proposed to maximize the moment carrying capacity in a truss knee connection using the HRCs, in which they are aligned around the perimeter of the gusset to maximize the moment capacity and to increase the stability of the truss knee joint.

• 한국수산과학회지
• /
• 제29권5호
• /
• pp.709-715
• /
• 1996

가막만의 굴양식장 환경용량을 산정하기 위해 생태계 모델을 이용하여 월별 기초생산력을 산정하고 년간 식물플랑크톤의 생산량을 구하여 얼굴로서의 전환계수를 사용하여 굴의 최대 생산 가능량 즉 환경용량을 산정 하였다. 1994년 6월부터 1995년 3월까지 굴양식기간 동안의 가막만 전체에서의 식물플랑크톤 생산량은 181,594 tonC이였고 최대 알굴 생산가능량은 287,033 ton이었고 단위용적당 생산가능량은 $0.29kg/m^3/year$였다. 가막만내에서 굴양식시설이 되어 있는 공간에서의 년간 최대 알굴생산 가능량은 15,443 ton이고 1994년도 실제 알굴생산량은 4,532 ton이므로 굴양식장 환경용량의 약 $29\%$에 해당되었고 1987년도 생산량은 14,592 ton이므로 환경용량의 $95\%$에 해당되었다. 따라서 다른 굴양식장 관리조건만 허용된다면 가막만에는 굴양식시설대수를 증가시키면 생산량이 더 증가할 수 있는 해역으로 평가되었다.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.363-371
• /
• 2019

In this study, the load carrying behavior of piled rafts installed in inclined bearing rock layer was investigated for rock-mounted and -socketed conditions. It was found that settlements induced for an inclined bearing rock layer are larger than for a horizontal layer condition. The load capacity of piled rafts for the rock-mounted condition decreased as rock-layer inclination angle (${\theta}$) increased, while vice versa for the rock-socketed condition. The load capacities of raft and piles both decreased with increasing ${\theta}$ for the rock-mounted condition. When bearing rock layer was inclined, loads carried by uphill-side piles were greater than those by downhill-side piles. The values of differential settlements of rock-mounted and -socketed conditions were not significantly different whereas slightly higher for the rock-socketed condition. The values of load sharing ratio (${\alpha}_p$) and its variation with settlement were not markedly changed by the inclination of bedrock. It was shown that ${\alpha}_p$ for piled rafts installed in rock layer was not affected by ${\theta}$ whereas actual loads carried by raft and piles may vary depending on the pile installation and rock-layer inclination conditions.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1996년도 봄 학술발표회 초록집
• /
• pp.13-14
• /
• 1996

• 대한토목학회논문집
• /
• 제7권2호
• /
• pp.107-120
• /
• 1987

본(本) 논문(論文)은 실용적(實用的)인 이차(二次)모멘트 신뢰성이론(信賴性理論)을 사용하여 체계적(體系的)이며 이론적(理論的)인 내하력산정(耐荷力算定) 방법(方法)을 제안(提案)하는데 연구(硏究)의 주안점을 두고 있다. 그리고 교량내하력(橋梁耐荷力) 평가(評價)의 새로운 접근 방법을 본(本) 논문(論文)을 통하여 시도하고자 한다. 이 새로운 방법의 기본개념(基本槪念)은 극심한 주행(走行)트럭하중을 받는 교량(橋粱)의 내하력(耐荷力)의 신뢰성수준(信賴性水準)을 신뢰성지수(信賴性指數) ${\beta}$로 나타내는 데 있다. 본(本) 논문(論文)에서 제안(提案)된 내하력(耐荷力) 판정공식(判定公式)으로 몇 개의 실존교량(實存橋粱)에 대하여 적용하여 보았으며 그 결과(結果)를 현행(現行)의 내하력(耐荷力) 판정공식(判定公式)을 적용하여 얻은 결과(結果)와 비교(比較)하여 보았다. 신뢰성이론(信賴性理輪)에 기초한 교량내하력평가(橋粱耐荷力評價) 공식(公式)은 가까운 장래에 저항(抵抗)과 하중효과(荷重效果)에 대한 기초적(基礎的)인 통계자료(統計資料)가 확보되는 대로 현행(現行)의 내하력평가(耐荷力評價) 방법(方法)에 대치될 수 있을 것으로 판단된다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.20-36
• /
• 2001

The purpose of this paper is estimating environmental carving capacity of Seoul Metropolitan Area for a sustainable city management using system dynamics model. A sustainable development requires a society to define sustainability constraints or environmental limits, environmental carving capacity. Environmental carving capacity can be defined as the level of human activity which a region can sustain at an acceptable quality of life level. This concept of environmental carving capacity has several important application to sustainable city planning and management. If the limitation of a human activity can be supported by a scientific data on carving capacity, the resulting decision and actions could more easily win public support for a sustainable development. However, one of the key issues is how to operationalize the carving capacity. In this paper, the environmental carving capacity was operationalized as a maximum number of industry structure, population, and housing that can sustain certain level of environmental quality of Seoul Metropolitan Area. The model developed in this paper consisted off sectors: population, housing, industry, land, and environmental sector. The model limits its main focus on the NO$_2$level of ambient air of Seoul. Carving capacity Seoul Metropolitan Area was estimated by figuring out the maximum number of population, industry structure, housing at an equilibrium point that sustain a desirable NO$_2$level. Based on the model estimation, several policy implications for a sustainable city management was discussed.

• Structural Engineering and Mechanics
• /
• 제26권3호
• /
• pp.277-295
• /
• 2007

3-D wall panels are used in construction of exterior and interior bearing and non-load bearing walls and floors of building of all types of construction. Fast construction, thermal insulation, reduced labor expense and weight saving are the most well pronounced advantage of such precast system. When the structural performance is concerned, the main disadvantage of 3D panel, when used as floor slab, is their brittleness in flexure. The current study focuses on upgrading ductility and load carrying capacity of 3D slabs in two different ways; using additional tension reinforcement, and inserting a longitudinal concentrated beam. The research is carried on both experimentally and numerically. The structural performance in terms of load carrying capacity and flexural ductility are discussed in details. The obtained results could give better understanding and design consideration of such prefabricated system.

• 한국패류학회지
• /
• 제32권2호
• /
• pp.83-93
• /
• 2016

For the continuous stable production of oyster, estimation of food availability (F) was carried out in Goseong Bay, south of coast Korea. Primary productivity ranged from 0.07 to $0.44gC/m^2/day$ (average $0.25gC/m^2/day$), lowest in July and highest in January. The distribution of primary productivity at Goseong Bay showed the pattern of "high in the south and low in the north." Food availability (F) was $F{\leq}0$, indicating insufficient food supply, from August to November and F > 0 from January to April. Continuous insufficient food supply was observed at 18 oyster farms in the southern part of the bay and 4 in its northern part. Mortality at the oyster farms was 56% on the average, and around 58% of death occurred during November when food supply was insufficient. The optimal population of cultured oyster per unit flow area was calculated to be $110-115indiv./m^2$ (198-201 indiv./string). When the sea area was divided into 3 regions (A, B, C) according to carrying capacity, the carrying capacity of (A) regions was $52-53indiv./m^2$ (93-95 indiv./string), (B) regions was $142-144indiv./m^2$ (255-259 indiv./string), and (C) regions was $198-202indiv./m^2$ (356-363 indiv./string). In particular, (A) regions showed extremely low productivity. For continuous stable oyster farming at Goseong Bay, it is necessary to control point and non-point source pollution through continuous environmental monitoring and to adjust harvest according to the base carrying capacity during the season of high water temperature.

• 한국수산과학회지
• /
• 제35권4호
• /
• pp.408-416
• /
• 2002

과밀양식으로 생산성이 저하되고 있는 거제 $\cdot$ 한산만의 안정적이고 지속적인 굴 생산방안을 제시하기 위하여 생태계 모델을 이용하여 먹이 공급량을 추정하였고, 양식 굴의 여수율과 chloro-phyll $\alpha$ 농도로부터 먹이 요구량을 계산하여 양식 수용력을 산정한 결과는 다음과 같다. 수확 크기별 굴의 먹이 요구량은 습중량 4g의 알굴인 경우 1.40~4.82mgC/ind./day (평균 2.49mgC/ind./day), 습중량 7g의 알굴인 경우 1.96-6.77mgC/ind./day (평균 3.50mgC/ind./day) 범위로 나타나 알굴의 습중량이 증가할수록 먹이 요구량도 크게 나타났다. 월별로는 2월이 가장 작았고, 9월이 가장 크게 나타났다. 월별 먹이 공급량을 월별 먹이 요구량으로 나누어 수확 크기별 수용력을 산정한 결과 2월이 평균 6.10 ton/ha로 최저 수용력을 나타내었고, 4월이 14.91 ton/ha로 최대 수용력을 나타내었다. 거제 $\cdot$ 한산만의 알굴 생산량은 9ton/ha로 최대 수용력의 $60\%$ 수준이나 지속적 생산을 위해서는 임계 수용력인 2월의 6.1ton/ha와 통계자료에 의한 최대 생산량 5.5ton/ha를 감안하여 현재 시설량을 $32\%{\~}39\%$ 정도 줄여야 할 것으로 판단되었다.