• 제목/요약/키워드: Environmental Weight Factors

검색결과 605건 처리시간 0.027초

한국자생 음나무집단 및 채취부위에 따른 Kalosaponin 함량 변이 (Variation of Kalosaponin Contents in Plant Parts and Population of Native Kalopanax septemlobus(Thunb.)Koidz)

  • 최명석;권기원;이철호
    • 생약학회지
    • /
    • 제31권2호
    • /
    • pp.203-208
    • /
    • 2000
  • The concentrations of 4 kalosaponins from tissues of Kalopanax septemlobus (Thunb.)Koidz grown in 7 provenances in Korea were determined by HPLC. Kalosaponin contents in plant part were much higher in the inner bark(30.59 mg/g on the dry weight basis) than those of young leaves(22.74 mg/g on the dry weight basis) and root bark(18.02 mg/g on the dry weight basis). A considerable range of variation in the contents was observed among population. The kalosaponin contents in inner bark from each population were highest in the Mt. Barwang (30.37 mg/g on the dry weight basis) followed by Mt. Gariwang, Hanra II, Mangun, Paltan, and Hanra I population. A variation of kalosaponin contents among population may be affected by both environmental and genetic factors. Establishment of selection and propagation of high kalosaponin containing trees can be a good source for the development of valuable forest products.

  • PDF

Exploring the Health Production Model in Vietnam

  • NGUYEN, Tuyen Thi Mong;NGUYEN, Quyen Le Hoang Thuy To
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권12호
    • /
    • pp.391-397
    • /
    • 2021
  • One of the sustainable development goals is to promote good health and well-being for all people. Child health is a top priority since their health issues can have a detrimental impact on human capital development, which is a critical input for the growth model. This paper applies the health production model to explore the determinants that influence the health of children under the age of five. The results of a survey of 203 households in Ho Chi Minh City, Vietnam, were examined. Child health is measured using anthropometric indicators such as weight-for-age, height-for-age, and weight-for-height (ZWFH). Three separate multinomial logistic models are regressed to examine the drivers of child health as proxied by z-score weight for age, z-score height for age, and z-score weight for height. The significance of input variables relating to a child's attributes, household, and environment was validated by the findings. The inclusion of overweight besides under-nourished indexes is novel because it reflects the current trend of child over-nutrition. The findings of the study highlight the importance of a wide range of initiatives to enhance child health. Moreover, the genetic effect is found to be crowded out by environmental and household factors. The finding verifies that despite their parents' moderate height, the future generation of Vietnamese can achieve the desired height.

General Factors of the Korean Exposure Factors Handbook

  • Jang, Jae-Yeon;Kim, So-Yeon;Kim, Sun-Ja;Lee, Kyung-Eun;Cheong, Hae-Kwan;Kim, Eun-Hye;Choi, Kyung-Ho;Kim, Young-Hee
    • Journal of Preventive Medicine and Public Health
    • /
    • 제47권1호
    • /
    • pp.7-17
    • /
    • 2014
  • Risk assessment considers the situations and characteristics of the exposure environment and host. Various physiological variables of the human body reflects the characteristics of the population that can directly influence risk exposure. Therefore, identification of exposure factors based on the Korean population is required for appropriate risk assessment. It is expected that a handbook about general exposure factors will be used by professionals in many fields as well as the risk assessors of the health department. The process of developing the exposure factors handbook for the Korean population will be introduced in this article, with a specific focus on the general exposure factors including life expectancy, body weight, surface area, inhalation rates, amount of water intake, and soil ingestion targeting the Korean population. The researchers used national databases including the Life Table and the 2005 Time Use Survey from the National Statistical Office. The anthropometric study of size in Korea used the resources provided by the Korean Agency for Technology and Standards. In addition, direct measurement and questionnaire surveys of representative samples were performed to calculate the inhalation rate, drinking water intake, and soil ingestion.

성인 남성의 혈압과 식이섭취 실태 및 기타 환경 요인과의 관계에 대한 사례연구 (Correlations among Blood Pressures, Dietary Intakes and Other Environmental Factors in Korean Adult Males)

  • 이일하
    • 대한가정학회지
    • /
    • 제24권4호
    • /
    • pp.57-68
    • /
    • 1986
  • The present survey was designed to investigate correlations among blood pressure, nutritional intakes, and various environmental factors in Korean adult males, and to observe the difference in dietary intakes between hypertensive patients and normotensive subjects. Two hundred forty-three adult men from Seoul and rural areas were interviewed about their food intakes, dietary patterns, food habits, and general environmental factors from December 20, 1982 to February 15, 1983. Their dietary intakes were surveyed by means of 24-hour recall diet method. Dietary score card was used in order to evaluate the quality of routine diet of the subject. Variables of environmental factors and factors related to hypertension were expressed as percentage, and the differences in nutrient intake and food score of each sub-group were examined by means of t-test. Correlation of all the variables were analyzed by Pearsons Correlation Coefficient. The results obtained are summarized as follows: 1. 38% of the subjects were between the ages of 40~49, and about one-half of the subjects were middle or high school graduates. 28% of the subjects earned 210, 000~350, 000 Won per month, and income distribution was almost identical to that of the urban population of Korea. 2. There was more overweight or obese found in the hypertensive patients than in the normotensive subjects. About 40% of the hypertensive patients reported a family history of hypertension, and their knowledge about hypertension was rather poor, but slightly better than the normotensive subjects. The patient group had less adherence to smoking and alcohol compared with the normotensive subjects, but no difference was observed in coffee drinking. The mean value of the blood pressure for the normotensive subjects was 127/86mmHg and 175/109mmHg for the hypertensive group. 3. Nutrient intake for the hypertensive group was lower for most of nutrients than in the healthy group. Hypertensive patients on diet therapy consumed less calories and carbohydrates compared with those who do not follow diet therapy. 4. There was no difference intake of these food groups between patients and the healthy group. Food score was strongly related to consumption of animal protein, saturated fats, Calcium, Iron, Vitamin A, Riboflavin, and Vitamin C, which are prone to be deficient in the typical Korean diet. 5. Blood pressure had a strong positive correlation with age, body weight, and socioeconomic level. In addition, monthly income was positively related with age and education level. 6. Three was a positive relationship between blood pressure and consumption of vegetable protein, and a negative relationship with consumption of Calories, Carbohydrates, Calcium, Iron, Vitamin A, Vitamin B1, Niacin, and Vitamin C. Animal protein intake increased as income and education levels increased, but this tendency was opposite for carbohydrates. In summary, nutritional intakes are strongly correlated with various environmental factors and the level of blood pressure. There was no difference between normotensive and hypertensive subjects with respect to the quality of food consumed except restricting energy and carbohydrate in the patient group.

  • PDF

소형차도로 방호울타리 형식선정을 위한 충돌계수 및 방호울타리 높이선정 연구 (A Study of Impact Factors and Barrier Height of Compact Car Road for Decision of Barrier Type)

  • 최현호;김기환;이의준;이상근
    • 대한토목학회논문집
    • /
    • 제30권6D호
    • /
    • pp.605-613
    • /
    • 2010
  • 본 연구에서는 소형차도로 방호울타리 형식선정의 필수요소인 충돌계수 분석 및 방호울타리 높이 선정을 위해 현재의 기준을 적용하는 과정에서 생긴 문제점을 파악하여 개선점을 제시하고 이를 해외기준과 비교분석하여 방호울타리의 형식결정을 위한 기준을 제시하였다. 이를 위해 소형차관련 사고사례분석을 실시하였고, 사고사례를 토대로 방호울타리의 형식선정에 중요인자인 충돌각도, 충돌차량, 충돌속도를 비교 분석 및 소형차 방호울타리의 소요높이를 결정하였다. 충돌각도의 경우 편도 2차로 고속도로 사고사례를 분석하여 유럽 RISER 연구 결과와 비교하여 상향조정의 필요성을 도출하였다. 충돌차량의 경우 경차, 소형승용차, 중형 및 대형승용차, 승용차(SUV), 승합차 및 소형 트럭으로 나누어 분석을 실시하였으며, 충돌사고소형차 사고누적율에 기반한 차량중량 및 충돌속도를 회귀분석하였으며 수도권고속도로 누적통행비율을 감안 충돌중량을 결정하였다. 또한 그 결과를 토대로 소형차도로 방호울타리 높이를 계산하였다. 본 연구의 결과는 향후 소형차도로 형식선정에 중요한 인자가 된다.

과산화수소를 이용한 철(Fe)선 용해반응에 따른 청정기술 개발에 관한 연구 (A clean technology development using the iron(Fe) dissolution reaction with hydrogen peroxide)

  • 김재우
    • 환경위생공학
    • /
    • 제16권4호
    • /
    • pp.62-68
    • /
    • 2001
  • The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of iron wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved iron. This study was aimed at gathering the basic data of iron wire dissolution- recovery process and proposes the reaction condition of iron wire dissolution- recovery process rind the factors influencing those reactions. The results were as follows : 1 . Hydrogen peroxide dissolution method used hydrochloric acid as the catalyst. 1. In the dissolution of iron wire(1.668 g), the condition of reaction was E1702(30 ml), HCI(20 ml) and $H_2O$(200 ml) ; time of the reaction was 18 min. P.W.(Piece weight) was 7.75 mg, and C.R. was $2.34{\;}{\Omega}$ 2. In the dissolution of iron wire(1.529 g), the condition of reaction was H7O2(30 ml), HCI(20 ml) and $H_2O$(200 ml), time of the reaction was 21 min., P.W.(Piece weight) was 7.73 mg, and C.R. was $2.35{\;}{\Omega}$. Hydrogen peroxide dissolution method used sulfuric acid as the catalyst. 1. In the dissolution of iron wire(0.834 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and 1702(5 ml) ; time of the reaction was 5 min.30 sec, P.W.(Piece weight) was 7.74 mg, and C.R. was $2.33{\;}{\Omega}$ 2. In the dissolution of iron wire(1.112 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and $H_2O_2$(5 ml) ; time of the reaction was 4 min.30 sec, P.W.(Piece weight) was 7.75 mg, and C.R. was $2.33{\;}{\Omega}$. Hydrogen peroxide dissolution method used hydrochloric acid and sulfuric acid as the catalyst confirmed a clean technology, because there were not occurred a pollutant discharged in the existing method.

  • PDF

Effects of Vibration Fatigue on Compression Strength of Corrugated Fiberboard Containers for Packaging of Fruits during Transport

  • Jung, Hyun-Mo;Park, Jeong-Gil
    • Journal of Biosystems Engineering
    • /
    • 제37권1호
    • /
    • pp.51-57
    • /
    • 2012
  • Purpose: The compression strength of corrugated fiberboard containers used to package agricultural products rapidly decreases owing to various environmental factors encountered during the distribution of unitized products. The main factors affecting compression strength are moisture absorption, long-term top load, and fatigue caused by shock and vibration during transport. This study characterized the durability of corrugated fiberboard containers for packaging fruits and vegetables under simulated transportation conditions. Methods: Compression tests were done after corrugated fiberboard containers containing fruit were vibrated by an electro-dynamic vibration test system using the power spectral density of routes typically traveled to transport fruits and vegetables in South Korea. Results: To predict loss of compression strength owing to vibration fatigue, a multiple nonlinear regression equation ($r^2=0.9217$, $RMSE=0.6347$) was developed using three independent variables of initial container compression strength, namely top stacked weight, loading weight, and vibration time. To test the applicability of our model, we compared our experimental results with those obtained during a road test in which peaches were transported in corrugated containers. Conclusions: The comparison revealed a highly significant ($p{\leq}0.05$) relationship between the experimental and road-test results.

Landslide Susceptibility Analysis in Baekdu Mountain Area Using ANN and AHP Method

  • Quan, Hechun;Moon, Hongduk;Jin, Guangri;Park, Sungsik
    • 한국지반환경공학회 논문집
    • /
    • 제15권12호
    • /
    • pp.79-85
    • /
    • 2014
  • To analyze the landslide susceptibility in Baekdu mountain area in china, we get two susceptibility maps using AcrView software through weighted overlay GIS (Geographic Information System) method in this paper. To assess the landslide susceptibility, five factors which affect the landslide occurrence were selected as: slope, aspect, soil type, geological type, and land use. The weight value and rating value of each factor were calculated by the two different methods of AHP (Analytic Hierarchy Process) and ANN (Artificial Neural Network). Then, the weight and rating value was used to obtain the susceptibility maps. Finally, the susceptibility map shows that the very dangerous areas (0.9 or higher) were mainly distributed in the mountainous areas around JiAnShi, LinJiangShi, and HeLongShi near the china-north Korea border and in the mountainous area between the WangQingXian and AnTuXian. From the contrast two susceptibility map, we also Knew that The accuracy of landslide susceptibility map drew by ANN method was better than AHP method.

A Production Method of Landslide Hazard Map by Combining Logistic Regression Analysis and AHP(Analytical Hierarchy Process) Approach Selecting Target Sites for Non-point Source Pollution Management Using Analytic Hierarchy Process

  • Lee, Yong-Joon;Park, Geun-Ae;Kim, Seong-Joon
    • 한국농공학회논문집
    • /
    • 제49권3호
    • /
    • pp.63-68
    • /
    • 2007
  • The LRA(Logistic Regression Analysis) conducts a quantitative analysis by collecting a lot of samples and the AHP(Analytic Hierarchy Program) makes use of expert decision influenced by subjective judgment to a certain degree. This study is to suggest a combination method in mapping landslide hazard by giving equal weight for the result of LRA and AHP. Topographic factors(slope, aspect, elevation), soil dram, soil depth and land use were adopted to classify landslide hazard areas. The three methods(LRA, AHP, the combined approach) was applied to a $520km^2$ region located in the middle of South Korea which have occurred 39 landslides during 1999 and 2003. The suggested method showed 58.9% matching rate for the real landslide sites comparing with the classified areas of high-risk landslide While LRA and AHP Showed 46.1% and 48.7% matching rates respectively. Further studies are recommended to find the optimal combining weight of LRA and AHP with more landslide data.

Effects of Sinusoidal Vibration Fatigue on Compression Strength of Corrugated Fiberboard Container for Packaging of Fruits

  • Jung, Hyun-Mo;Kim, Jong-Kyoung;Kim, Man-Soo
    • 한국포장학회지
    • /
    • 제16권1호
    • /
    • pp.1-4
    • /
    • 2010
  • The compression strength of corrugated fiberboard containers for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about 30~40% owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard containers for packaging the fruits and vegetables under simulated transportation environment. After the packaging freight was vibrated at various experimental conditions, the compression test for the packaging was performed. The compression strength of corrugated fiberboard containers decreased with loading weight and vibration time. The multiple nonlinear regression equation ($R^2$ = 0.9198) for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibration time.

  • PDF