• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.193-198
• /
• 1988

This study was carried out to investigate the influence of shading pretreatment and planting density on the periodic needle leaves growth in fresh and dry weight. 1. The fresh and dry weight growth of needle leaves per seedlings increased with light intensity and decreased with increase of density. The best growth of needle leaves in fresh weight and dry weight appeared during the period from May to June. 2. The contribution rates to the growth of fresh and dry weight of needle leaves were 1.9% and 5.1% in light intensity, 3.6% and 3.2% in density and 83.7% and 75.6% in growth period, respectively. 3. For the three factors, shading, density and growth period, all the interactions between any two factors, and among the three factors in the fresh and dry weight growth of leaves per plant were significant.

• Journal of Environmental Health Sciences
• /
• v.40 no.4
• /
• pp.279-293
• /
• 2014

Objectives: Children are more susceptible to heavy metal toxicity than adults. The purpose of this study was to evaluate heavy metal concentrations in the blood of Korean preschoolers and investigate the association between metals in blood and related factors. Methods: A total of 512 subjects from 36 to 83 months of age were sampled. A questionnaire survey was performed and the levels of lead, mercury and cadmium were measured in the blood samples of all subjects. Their parents were interviewed in order to obtain information on basic characteristics, dietary patterns, socio-economic factors, and indoor/outdoor environment of the preschoolers. Multiple linear regression was used to analyze the association between the above factors and lead, mercury or cadmium concentrations. Results: The geometric mean concentrations of lead, mercury and cadmium in the blood were $1.45{\pm}1.58{\mu}g/dL$, $2.14{\pm}1.74{\mu}g/dL$ and $0.23{\pm}1.91{\mu}g/dL$, respectively. Results from multiple linear regression analysis showed that blood lead levels were associated with birth weight and paternal smoking status. Daily mercury intake from food and maternal education were also shown to influence mercury concentrations in blood. Also, blood cadmium concentrations were associated with maternal age and having a bus garage near the place of residence. Conclusion: This study suggests that smoking status, dietary patterns and the environmental status near the residence should be considered as important factors for preventable sources of heavy metal exposure in preschoolers.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.72-75
• /
• 2003

Plant species have shown the capability to absorb U into the biomass. Norman(l952) even suggested that uranyl ion acts as an accessory microelement in growth of Lemna and flax roots. The plants, termed metal hyperaccumulators, can extract and accumulate more than 1000-10,000mg heavy metal per kilogram of dry weight of plants (0.1-1%). The most vital main factors influencing the ability and efficiency of phytoremediation is the ability of the plant to uptake the metals from soil before the accumulation mechanism happens in the plant tissue. (omitted)

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.320-328
• /
• 2017

This paper describes the non-isothermal pyrolysis of wood pellet and saw dust, and their blends with bituminous coal. The blends showed the distinct, two peaks in thermogravimetric curves, and the first peak came from the biomass pyrolysis and the second one came from the coal pyrolysis. The interaction in the blend was evaluated in terms of the maximum rate of weight loss, characteristic temperatures, char yields, and the calculated and experimental thermogravimetric curves. The activation energies and frequency factors for the blends were obtained with the multi-stage, Coats and Redfern method. The respective activation energies of 73 and 67 kJ/mol and the frequency factors of 725,100 and $65,262min^{-1}$ were obtained for the present wood pellet and saw dust samples. The thermogravimetric study shows that there is no significant interaction between the present biomass and coal in the blends, and the pyrolysis behavior can be described with the additive rule.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.866-868
• /
• 1998

Room temperature vulcanizing(RTV)silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water filming on the surface and thus to suppress the leakage current and consequent flashover. However, the electrical property and its hydrophobicity of RTV silicone rubber coating under outdoor conditions may be influenced by many environmental factors. In this study various treatments, such as salt-fog, salt water immerging and UV irradiation were applied to samples for investigation the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased as the degradation time longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight)silicone fluid diffused from the bulk to the surface.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2259-2277
• /
• 2023

We propose a probabilistic fish growth model for smart aquaculture systems equipped with IoT sensors that monitor the ecological environment. As IoT sensors permeate into smart aquaculture systems, environmental data such as oxygen level and temperature are collected frequently and automatically. However, there still exists data on fish weight, tank allocation, and other factors that are collected less frequently and manually by human workers due to technological limitations. Unlike sensor data, human-collected data are hard to obtain and are prone to poor quality due to missing data and reading errors. In a situation where different types of data are mixed, it becomes challenging to develop an effective fish growth model. This study explores the unique characteristics of such a combined environmental and weight dataset. To address these characteristics, we develop a preprocessing method and a probabilistic fish growth model using mixed data sampling (MIDAS) and overlapping mixtures of Gaussian processes (OMGP). We modify the OMGP to be applicable to prediction by setting a proper prior distribution that utilizes the characteristic that the ratio of fish groups does not significantly change as they grow. We conduct a numerical study using the eel dataset collected from a real smart aquaculture system, which reveals the promising performance of our model.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.153-159
• /
• 2005

The purpose of this study was to assess the ergonomic risks of lifting tasks in a marine diesel engine manufacturing industry using the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE). Average Lifting Index(LI=Weight of Load/Recommended Weight Limit) of a total number of 45 lifting tasks was $1.6{\pm}0.7$. The LIs were above 1 at 34 tasks(75.6%), and above 2 at 11 tasks(24.4%). Parts management showed the highest average LI value (LI=2.3) in all departments, which resulted from high frequency and heave load of lifting. The common and significant ergonomic risk factors in the processes were the heavy weight of diesel engine parts and the long horizontal distance. In addition, some lifting tasks had such potential risk factors as the long vertical distance, the high frequency of lifts or the long work duration.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.4
• /
• pp.33-40
• /
• 2009

In earthwork projects, the designer considers cut and fill balance for minimizing earthwork which may significantly decrease construction costs. Despite carrying out considerable earthwork design, the decrease in volume of earth occurs in construction sites because of embankment settlement under self-weight, consolidation settlement of soft ground, cavity filling and soil loss due to rainfall-runoff. To reflect the decrease in volume of earth, the specifications for road construction just give shrinkage factors in embankment for soils without consideration of embankment settlement under self-weight. In this study, the computational method is used to estimate the amount of embankment settlement under self-weight developed by Iseda (1972) and Ishii (1976). This research shows that the total compression settlements are between 3 to 10 percent of embankment height according to the property of embankment material and embankment height. As a result, the designer should consider the compression settlement on embankment material under selt-weight.