• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.249-262
• /
• 2021

This study investigated the pollution characteristics of the main pollution zone in the Hwangguji watershed and the influence of the tributary on the main stream. The characteristics of the main pollution zone, including, the water quality index (WQI), stream rating, load duration curve (LDC), delivery load density (DLD), and contribution of the tributary to the mainstream, were evaluated by time-series visual heatmap. The WQI of the mainstream of Hwangguji was lowered to the poor (IV) level from the inflow point of Suwon stream (SW) and the LDC excess rate in the T-P was higher than that of BOD₅, especially for the wet season, suggesting that management of non-point source with T-P is preferred. The contribution (%) of the tributaries in the upstream section of Hwangguji watershed were BOD₅ 14.54%, TOC 15.67%, T-N 5.43%, and T-P 6.97%. In particular, the Suwon sewage treatment plant located in the mainstream showed a high contribution of BOD₅ (64.40%) and T-P (53.54%), respectively, due to the high discharge rate (6.019 m³/sec). Meanwhile, Sammi and Gal stream have a large impact on the mainstream with high DLD and poor WQI. Thus, both streams were considered as pollution hot spots. These results provide useful basic data for preparing more effective water quality improvement and management plans in the watershed.

• Journal of Korean Society on Water Environment
• /
• v.29 no.4
• /
• pp.466-475
• /
• 2013

Non-point source pollution management is one of the most important issues in Korean water quality/watershed management. In recent years, Low Impact Development (LID) has emerged as an effective approach to control stormwater in an urban area. This study illustrates how to design and evaluate the effect of non-point pollutant management using EPA-SWMM LID module and suggests design parameters for modeling LID facilities. In addition, optimal installation locations of LID can be determined by a simple distributed hydrologic model by using SWMM for a long-term.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.877-880
• /
• 2003

In a competitive and globalized business environment, the need for the green products becomes stronger. To meet these trends, the environmental assessment besides delivery, cost and quality of products should be considered as an important factor in new product development phase. In this paper. a knowledge-based approximate life cycle assessment system (KALCAS) for the collaborative design environment is developed to assess the environmental impacts in context of product concept development. It aims at improving the environmental efficiency of the product using artificial neural networks consisting of high-level product attributes and LCA results. The overall framework of the collaborative environment including KALCAS is proposed. This architecture uses the CO environment to allow users on a wide variety of platforms to access the product data and other related information. It enables us to trade-off the evaluation results between the objectives of the product development including the approximate environmental assessment in the collaborative design environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.2
• /
• pp.105-111
• /
• 1992

The characteristics of suspended particulate matters(dust) in Seoul had been studied. The effects of various environmental factors, such as passengers, motor vehicles, wind velocity, wind direction, temperature and humidity were examined during the study period. It was shown that the dust emission occurred through the heating was the major source, and the contribution of passengers and motor vehicles was relatively negligible during the night. It was also revealed that the number concentration between $0.5{\mu}m$ and $2.0{\mu}m$ was increased due to the attachment among the dusts and mists by the increased humidity during the night. Considering the fact that the particles larger than $2{\mu}m$ take the most part of weight concentration, it was suggested that the PM-10 method which considered respirable particle as a weighting factor should be adapted in the evaluation air quality.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.5
• /
• pp.714-723
• /
• 2000

The purpose of this study is to develop functional and sensible brassiere for middle-aged women. As a methodology, engineering design process, especially, QFD(Quality Function Deployment) was adopted to translate consumer's needs into product design parameters. Wearing tests of commercial brassiere were performed for the development o subjective measurement scale. The environmental condition was controlled at 28$\pm$1$^{\circ}C$, 65$\pm$3%RH. As results, subjective measurement scale and dimension for the evaluation of sensible brassiere were extracted from factor analysis. Four factors were fitting, aesthetic property, pressure sensation, displacement of brassiere due to movement. Regression equations with the subjective evaluation descriptors were developed for the prediction of wearing comfort of brassiere. (R2=.82) The most critical design parameter was wire-related property and second one was stretchability of main material of brassiere. Also, wearing comfort of brassiere was affected by the interaction of initial stretchability of wing and support of strap.

• International Journal of Quality Innovation
• /
• v.10 no.1
• /
• pp.115-126
• /
• 2009

Video transmission effectiveness in the Ad Hoc network is becoming important recently, if different routing protocols are applied. Some researchers conclude that the reactive protocols are better for file transfer protocol (FTP) and constant bit rate (CBR) or hypertext transfer protocol (HTTP) transmission in an Ad Hoc wireless network but the performance report of video transmission is not much. This study adopts Qualnet (Network Simulator) as a simulation tool for environmental designing and performance testing, and employs an experimental design with eight groups. Our experiment shows that: (1) The performance of AODV (reactive) protocol is better than DSDV, ZRP and DSR when the transmission load has only one video stream; (2) Proactive (DSDV) and Hybrid protocols (ZRP) are better for a smaller Ad Hoc network when it transmits a video stream with some applications (VoIP, FTP and CBR). We conclude that packet loss rate is sensitive to the quality of video transmission and it has negative relationship with Peak Signal-to-Noise Ratio (PSNR) value. In addition, our experiment also shows that PSNR is a simple Metric for the performance evaluation of video transmission.

• Journal of Korean Society for Quality Management
• /
• v.29 no.1
• /
• pp.184-190
• /
• 2001

Industrial structure is more developed, the economical value of human resources and the cases which risks worker's Health & Safety is expended. The Safety & Health issues are focused on elements of control for management activity simultaneously with work environment as well as the risk elements which risks worker's life and body. The activity for combination of basic management System and Safety & Health management is progressing with active discussion in ILO, BS 8800 is specified the guidance of Occupational Safety & Health Management System in UK. 1996. This research refers to BS 8800:1996, specification as a basic model, and introduce of the result of certification development result in Occupational Safety & Health management System with in ISO 14001 Environmental System Standards & ISO 9001 Quality Management System Standards and Systemic Factors. Through this applicability and efficiency evaluation, we make an effort to support and to improve the specification. Also applicability evaluation of Occupational Safety & Health management System and the specification developed for the purpose of the third party certification is applied with expending in industry, and the method is presented through the case which is required to support for method review and activities.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.87-92
• /
• 2010

As the Concept "how environmental friendly" becomes more and more important in road construction. However, so far there is no estimation method. Environmental friendly concept can be incorporated at the plan level in order to influence decision making, and support policies that affect environment. The overall goal of this study was to develop environmental friendly concept measures for the national highway and to develop a methodology to implement a more environmental friendly concept. The research identified 8 performance measures through a project analysis that could address environmental impact assessment system's ten strategic goals - Topography, Wildlife, hydrology, landuse, air quality, water quality, soil, waste, noise, landscape. The qualitatively and quantitatively evaluation approach was selected as the decision support framework and performance measure were investigated using the AHP(Analytic Hierarchy Process) and pilot corridor for a 10 section and calculate the index values. The methodology was applied to a pilot corridor comprised of a 120km section of national highway in korea. The methodology made it possible to identify the specific performance measures that need improvement to enhance the overall environmental friendly concept. It is fairly intuitive, based on readily available data, and is easy to apply. It provides a powerful tool for government to assess the relative environmental friendly conceptof their transportation corridors now and in the future. It allows for comparisons within a corridor and with other corridors and identifies the improvements needed to enhance the environmental friendly concept.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.61-69
• /
• 2002

Daylighting is a powerful vehicle of architectural expression and provides buildings a living quality due to constantly changing properties in intensity and color. As an environmental system, daylighting should be subjected to the same level of rigorous analysis and review that any environmental system receives. For example, increasing cooling loads and causing visual displeasure are easily occurred owing to the excessive sunlight through windows. Therefore, daylighting performance attributes and physical characteristics must be described qualitatively and quantitatively in early design process. In various architectural daylighting performance evaluation methods, the scale model experiment can be applied due to it's simplicity and usefulness. So, this study aims to evaluate the validation of scale model experiments in architectural daylighting performance. For the purpose, two scale model experiments under clear sky are conducted. And, the validation of the experiments are evaluated by computer simulations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.63-68
• /
• 1974

The growth of sea weeds is greatly affected by the environmental conditions of ambient water. Especially nutrient salts in sea water function as a major factor to the growth of lavers, so that the content of inorganic substances in lavers could he a criterion for quality evaluation of lavers. In this experiment, the relation between the quality and the content of Zinc and Magnesium which are not only physiologically active and closely related with pigments such as chlorophll and phycobilins but also important in quantify is discussed if such a measurement to be an index for quality evaluation. Sixteen samples of layers were collected from three different culture farms, 7 from Jangrim-Busan, 6 from Wando-Jeon Nam, 3 from Hadong-Gyeong Nam, and classified into 3 quality grades to each farm and to whole samples by organoleptic test. Zinc and Magnesium were analyzed by atomic absorption spectrophotometry. For pigment analysis, chlorphyll was extracted with 85 percent acetone, filtered and the absorbance was measured at 660 nm and the residue was further extracted with phosphoric buffer solution to determine the optical density for phycobilins at 560 nm. The result showed that the total content of Zinc and Magnesium varied between the farms, but kept consistent with quality grades from the same farm. The Zinc content was correlated proportion- ally with the content of phycobilins, and Magnesium content in total ash could roughly represent the content of chlorophll except some examples in which the Magnesium content of chlorophyll-ext ractresiduewasexceptionallyhigher. In conclusion the contents of these metals provide an applicable index for quality judgment of lavers.