• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.261-277
• /
• 2017

This study defines influencing sections as the part of the road section where passing vehicles are traveling with the lower speed compared to speed limit due to speed humps. The influencing section was divided into 3 parts; influencing section before the speed hump, interval section, and influencing section after the speed hump. This analysis focused on the changes of each part depending on installation types, vehicle types, and daytime or nighttime. For the interval section, especially, the ratio of distance traveled with lower speed than speed limit to interval section is defined as effective influencing section ratio to be analyzed. Vehicle speed profiles were collected with a speed gun to extract influencing section lengths. The survival analysis was applied and estimated survival functions are compared with each other by several statistical tests. As a consequence, the average length of influencing section on the 50m sequential speed humps was 75.3% longer during the deceleration than that of isolated speed hump, and 18.9% during the acceleration. The effective influencing section ratio for the 30m and 50m sequential speed humps had a small difference of 81.0% and 76.0% while the absolute values of the section that passing speed were less than the speed limit were longer on 50m sequential speed humps, each being 24.3m and 38.0m. Using the log rank test, it was evident that sequential speed humps were more effective to increase the length of influencing sections compared to the isolated speed hump. Vehicle type was the strong factor for influencing section length on the isolated speed hump, but daytime or nighttime was not the effective one. This research result can be used for improving the efficiency selecting the installation point of speed humps for road safety and estimating the standard of the distance between sequential speed humps.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.151-162
• /
• 2009

When viewing that since the 1990s local governments have tried to build golf courses as a plan to revitalize the attraction of home and abroad tourists and to increase their tax incomes and that big companies are interested in leisure business including golf courses as a future promising business in the 21st century, golf courses seem to continuously increase in the future. On the contrary, noticing that golf courses are not only the main culprit behind the damage of natural environment and environmental pollution but also a target of real estate speculation and that golf makes a sense of incongruity between the classes of a society as a luxury sports, environment activists and local residents raise criticism to golf. Golf in our country shows a special sports phenomenon of which the pros and cons appear continuously. So, it is judged that policy for golf development direction should be set up based on verified scientific data. Thus, the research aims at deriving the location types of golf courses by looking at laws from the period of formation of the initial domestic golf courses to the recent period, grasping their distribution status according to time series and regions, conducting a questionnaire survey regarding location factors for golfers and the workers of golf courses, and dividing golf courses into several types. It is expected that the research will be a fundamental material when a golf course is built later on, contributing to the research of golf courses.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.1
• /
• pp.55-61
• /
• 2003

This study was conducted to evaluate distribution and behavior characteristics of heavy metals for tidal flat sediments in the Saemankeum area. The value of heavy metal contents in the tidal flat sediments were higher than that surveyed in 1994, but showing that it's lower when compared with the value of Shiwha lake. Enrichment factors in the tidal flat sediments showed below 1 except for Pb and Zn. Metal excesses was appeared that Cu, Cr, Fe, Mn lacked and Pb, Zn were high. The correlation analysis between heavy metals and organic matters was found high positive relationship (r=0.424$\~$0.839), especially correlation coefficient between ignition loss and oxide Al, Fe, Mn showed high positive relationship above 0.7. The correlation analysis between Brain size and hear metals was found that as grain size was small, heavy metals contents were increased. Correlation coefficient between silt and heavy metals except for Cu, Pb showed high positive relationship as 0.552$\~$0.732.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.22-44
• /
• 2023

The subsistence economics of the early Bronze Age has focused on explaining the intensity of agricultural practices without sufficiently taking into account the diversity of production methods that may arise from cultural types or environmental factors. The problem appears to stem from paying insufficient attention to the question whether we should understand the transition from the Neolithic Age to the Bronze Age as continuous or discrete. This has hitherto blocked an avenue to investigate the gradual changes in subsistence resource production methods. Taking as its premise that changes in the production methods of subsistence resources in the Bronze Age have been continuous and gradual, this paper seeks to restore the production patterns of subsistence resources according to the variety of factors that may have influenced the early Bronze Age production method. With diverse cultural patterns and ecological spaces of the early Bronze Age being confirmed, the work of restoring the production methods of subsistence resources in a specific period is difficult to achieve with one or two stand-alone analyses. A more appropriate method would involve separating a number of different aspects related to the production of subsistence resources, analyzing and interpreting each, and in the final stage, synthesizing the analyses. The specific research method employed in this paper checked for compositional differences in stone production tools, functionally categorized according to a variety of factors that have a close relationship with the production of subsistence resources: cultural-environmental factors and cultural patterns, geographical and topographical factors, soil productivity, and size of settlement. The results of the analysis are as follows: for the early Bronze Age production pattern of subsistence resources in the Seoul and Gyeonggi regions, while no substantive differences were observed with respect to cultural type, geographical and topographical location, the results show statistically significant differences in the composition of production tools according to settlement size and soil productivity. Also, with an increasing ratio of settlement size and total production soil, increases in hunting and armoring tools, woodworking tools, and harvesting tools were observed; on the other hand, when it came to the ratio of fishing tools, the opposite relationship was observed. While a correlation between settlement size or crop cultivation productivity and dependence on hunting or farming was expected, the results of the regression analysis show that settlement size and soil productivity ratios do not have mutually significant relationships. The results thus illustrate that patterns of production differ according to a variety of factors, and no single factor is decisive in the adoption of subsistence resource production methods by a specific settlement. Therefore, the paper emphasizes the need to investigate the production patterns of subsistence resources according to the variety of cultural and environmental factors that make up settlements in early Bronze Age society.

• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.1-18
• /
• 1986

This study was initiated to estimate productivity of Quercus variabilis stand. However the practical objective of this study was to provide some information to establish the basis of selecting the suitable site for Quercus variabilis. The productivity measured in terms of DBH, height, basal area and stem volume was hypothesized, respectively, to be a function of a group of factors. This study considered 32 factors, 20 of which were related to the forest environmental factors such as tree age, latitude, percent slope, etc. and the rest of which were related to soil factors such as soil moisture, total nitrogen, available $P_2O_5$, etc. The data on 4 productivity measurements of Quercus variabilis growth and related factors cited were collected from 99 sample plots in Kyeongbook and chungbook provinces. Some factors considered were, in nature, discrete variables and the others continuous variables. Each kind of factor was classified into 3 or 4 categories and total numbers of such categories were eventually amounted to 110. Then each category was treated as an independent variable. This is amounted to saying that individual variable was treated a dummy variable and assigned a value 1 or 0. However the first category of each factor was deleted from the normal equation for statistical consideration. First of all, each of 4 productivity measurements of Quercus variabilis growth was regressed and, at the same time, those 110 categories. Secondly, the partial correlation coefficients were measured between each pair of 4 productivity measurements and 32 individual foctors. Finally, the relative scores were estimated in order to derive the category ranges. The result of these statistical analyses could be summarized as follows: 1) Growth measurement in terms of height seems to be a more significant criterion for estimation of productivity of Quercus variabilis. 2) Productivity of forest on stocked land may better be estimated in terms of forest environmental factors, on the other hand, that of unstocked land may be estimated in terms of physio-chemical factors of soil. 3) The factors that a strongly positive relation to all growth factors of tree are age group, effective soil, soil moisture, etc. This implies that these factors might effectively be used for criteria for selecting the suitable site for Quercus variabilis. 4) Parent rock, latitude, total nitrogen, age group, effective soil depth, soil moisture, organic matter, etc., had more significant category range for tree growth. Therefore, the suitable site for Quercus variabilis may be selected, based on this information. In conclusion, the above results obtained by the multivariable analysis can be not only the important criteria for estimating the growth of Quercus variabilis but also the useful guidance for selecting the suitable sites and performing the rational of Quercus variabilis forest.

• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.465-478
• /
• 1995

The objective of this study was to investigate the impacts of large-scale timber harvesting on the environment of a mature hardwood forest. To achieve the objective, the effects of harvesting on forest environmental factors were analyzed quantitatively using the field data measured in the study sites of Seoul National University Research Forests [(Mt.) Paekunsan] for two years(1993-1994) following timber harvesting. The field data include information on vegetation, soil mesofauna, physicochemical characteristics of soil, surface water runoff, water quality in the stream, and hillslope erosion. For comparison, field data for each environmental factor were collected in forest areas disturbed by logging and undisturbed, separately. The results of this study were as follows : The diversity of vegetational species increased in the harvested sites. However, the similarity index value of species between harvested and non-harvested sites was close to each other. Soil bulk density and soil hardness were increased after timber harvesting, respectively. The level of organic matter, total-N, avail $P_2O_5$, CEC($K^+$, $Na^+$, $Ca^{{+}{+}}$, $Mg^{{+}{+}}$) in the harvested area were found decreased. While the population of Colembola spp., and Acari spp. among soil mesofauna in harvested sites increased by two to seven times compared to those of non-harvested sites during the first year, the rates of increment decreased in the second year. However, those members of soil mesofauna in harvested sites were still higher than those of non-harvested sites in the second year. The results of statistical analysis using the stepwise regression method indicated that the diversity of soil mesofauna were significantly affected by soil moisture, soil bulk density, $Mg^{{+}{+}}$, CEC, and soil temperature at soil depth of 5(0~10)cm in the order of importance. The amount of surface water runoff on harvested sites was larger than that of non-harvested sites by 28% in the first year and 24.5% in the second year after timber harvesting. The level of BOD, COD, and pH in the stream water on the harvested sites reached at the level of the domestic use for drinking in the first and second year after timber harvesting. Such heavy metals as Cd, Pb, Cu, and organic P were not found. Moreover, the level of eight factors of domestic use for drinking water designated by the Ministry of Health and Welfare of Korea were within the level of the first class in the quality of drinking water standard. The study also showed that the amount of hillslope erosion in harvested sites was 4.77 ton/ha/yr in the first year after timber harvesting. In the second year, the amount decreased rapidly to 1.0 ton/ha/yr. The impact of logging on hillslope erosion in the harvested sites was larger than that in non-harvested sites by seven times in the first year and two times in the second year. The above results indicate that the large-scale timber harvesting cause significant changes in the environmental factors. However, the results are based on only two-year field observation. We should take more field observation and analyses to increase understandings on the impacts of timber harvesting on environmental changes. With the understandings, we might be able to improve the technology of timber harvesting operations to reduce the environmental impacts of large-scale timber harvesting.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.10-17
• /
• 2001

Purpose: We measured anti-H. pylori IgG in Korean elementary school children living in Shinchon area of Seoul, Korea to evaluate the influence of environmental living standards on H. pylori infection. Methods: IgG antibodies to H. pylori were measured in plasma using a commercial ELISA kit (GAP IgG Helicobacter pylori, Bio-Rad Laboratories Inc., Hercules, CA, USA). Information on environmental status such as place of birth, parental income, type of housing, number of persons in the household, parents' occupation, family history of peptic ulcer disease and gastric cancer was obtained. Statistical analysis was done by Chi-square and logistic regression test using SPSS $7.0^{TM}$ for Windows. Results: Study subjects consisted of 571 children, and the age distribution ranged from 6.0 to 13.6 years with a mean of $9.6{\pm}1.8$ years. Male-to-female ratio was 1.1:1. The seropositive rates of H. pylori infection ranged from 10.4% in children aged 6 years to 30.9% in 12 year-old group, overall 16.8%. The prevalence of H. pylori infection progressively increased with age, but there was no significant difference in seropositive rates among children in different age groups (p=0.06). Seropositive rates of anti-H. pylori IgG on the basis of gender, place of birth, parental income, type of housing, parents' occupation, family history of peptic ulcer disease and gastric cancer showed no statistically significant difference. Interestingly, however, seropositive rate of anti-H. pylori IgG showed statistical significance in relation to number of persons in the household (p=0.003; Odds ratio 1.50 by logistic regression test). Conclusion: These results suggest that number of persons in the household is the most important factor among environmental living standards, and that risk of H. pylori infection increases by increment of 1.5 times as the number of persons in the household increases by one.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Journal of Environmental Impact Assessment
• /
• v.30 no.2
• /
• pp.105-116
• /
• 2021

In the city of high population density crowded with buildings, Urban Heat Island (UHI) is intensified, and the city is vulnerable to thermal comfort. The maintenance of vacant land in downtown is treated as a factor that undermines the residential environment, spoils the urban landscape, and decreases the economic vitality of the whole region. Therefore, this study compared the effects on microclimate in the surrounding area according to the development scenarios targeting the vacant land in Songhyeon-dong, Jongno-gu, Seoul. The status quo, green oriented, building oriented and green-building mediation scenarios were established and ENVI-met was used to compare and analyze the impact of changes in wind speed, air temperature and mean radiant temperature (MRT) within 1 km of the target and the target site. The result of inside and 1 km radius the targeted area showed that the seasonal average temperature decreased and the wind speed increased when the green oriented scenario was compared with the current state one. It was expected that the temperature lowered to -0.73 ℃ or increased to 1.5 ℃ in summer, and the wind speed was affected up to 210 meters depending on the scenario. And it was revealed that green area inside the site generally affects inside area, but the layout and size of the buildings affect either internal and external area. This study is expected to help as a decision-making support tool for developing Songhyeon-dong area and to be used to reflect the part related to microclimate on the future environmental effects evaluation system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.85-92
• /
• 2015

This article presents the dynamic instability response of sigmoid functionally graded material plates on elastic foundation using the higher-order shear deformation theory. The higher-order shear deformation theory has ability to capture the quadratic variation of shear strain and consequently shear stress through the plate thickness. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. The results of dynamic instability analysis of sigmoid functionally graded material plate are presented using the Navier's procedure to illustrate the effect of elastic foundation parameter on dynamic response. The relations between Winkler and Pasternak elastic foundation parameter are discussed by numerical results. Also, the effects of static load factor, power-law index and side-to-thickness ratio on dynamic instability analysis are investigated and discussed. In order to validate the present solutions, the reference solutions are used and discussed. The theoretical development as well as numerical solutions presented herein should serve as reference for the dynamic instability study of S-FGM plates.