• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.659-665
• /
• 2016

The limit equilibrium method (LEM) is commonly used for slope design and stability analysis because it is easy to simulate slope and requires short calculating time. However, LEM cannot adequately simulate ploughing failure in a footwall slope with a joint set dipping parallel with slope, e.g. bedding joint set. This study performed parametric study to analyze the influence factors on ploughing failure using UDEC which is a commercial two-dimensional DEM (Distinct Element Method)-based numerical program. The influence of joint structure and properties on stability of a footwall slope against ploughing failure was investigated, and the factor of safety was estimated using the shear strength reduction method. It was found that the stability of footwall slope against ploughing failure strongly relies on dip angle of conjugate joint, and the critical bedding joint spacing and the critical length of slab triggering ploughing failure are also affected by dip angle of conjugate joint. The results obtained from this study can be used for effective slope design and construction including reinforcement.

• Architectural research
• /
• v.17 no.1
• /
• pp.13-20
• /
• 2015

The physical environment can dramatically affect students' feeling and their behavior, educational attainment, and the way in which we do school activities. Unlimited access to campus areas without appropriate securities have reported an increase of crime in school area and safety issues has encouraged school facility planners to install securities devices at every corner of buildings. However, it is still questionable whether this approach is enough to protect students and staffs from the victimization of crime, including thefts, burglaries and sexual offences. There has been continued doubt about the safety of educational facilities where individual college students are studying and enjoying extra-curricular activities. Therefore, the purpose of this study is intended to investigate the effects of perception of safety by students on the level of academic performance at public outdoor environment of university campus. An extensive literature noted that the central element of modern school design principle mainly holds the theory of crime prevention through environmental design (CPTED) and the concept of defensible space. The second generation of CPTED also focused on social soft issues as well as situational factors, which extends beyond mere physical design to include social factors. The correlation analysis found that the effect of sense of safety does appear to be statistically significant on the facilitation of academic achievement. However, the analysis of Chi-square concluded that the perception of safety was not related to demographic and socio-economic profiles of the group except for gender. Further, stepwise multiple regression analysis revealed that the most prime predictor for academic achievement were 'safe public outdoor space/paths' at university campus environment, implying careful design of public open space and sidewalks based on the guideline of CPTED. The study also demonstrated that as the level of positive perception of safety rose, the overall academic achievement also responded to the specified rate (${\beta}=.99$). Finally, the findings reinforce an evidence that high-quality school environments are a positive factor in student academic performance.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.1-23
• /
• 1999

A palynological investigation of the Annyeong-ri, Hwasung-gun Gyeonggi-do, in where Yung-Nung and Gun-Nung are located, was carried out for the first time. From the pollen analysis, two pollen zones are established: Pollen Zone I : Ainus-Quercus-Pinus and Pollen Zone Ⅱ : Pinus. Pollen Zone I is characterized by Mixed coniferous and deciduous broadleaved vegetation during about 3,500 yr. B.P.-2,000 yr. B.P., while after 2,000 yr. B.P. Pollen Zone Ⅱ appears to be Coniferous vegetation and Evergreen broadleaved vegetation. The former reflects there was a lowland fluvio-lacustrine environment before fully lacustrine one which represents the latter. Pollen analysis indicates the vegetation before 2,000 yr. B.P. was controled by environmental factor such as climate conditions, whereas after that time vegetation was strongly effected by human's impact. It is concluded that pollen analysis is useful to find out the relationship between vegetation history and man's interference. In addition freshwater algae play to tell the lake environments.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8093-8100
• /
• 2016

Background: Genetic and environmental factors play important roles in pathogenesis of digestive tract cancers like those in the esophagus, stomach and colorectum. Folate deficiency and methylenetetrahydrofolate reductase (MTHFR) as an important enzyme of folate and methionine metabolism are considered crucial for DNA synthesis and methylation. MTHFR variants may cause genomic hypomethylation, which may lead to the development of cancer, and MTHFR gene polymorphisms (especially C677T and A1298C) are known to influence predispositions for cancer development. Several case control association studies of MTHFR C677T polymorphisms and colorectal cancer (CRC) have been reported in different populations with contrasting results, possibly reflecting inadequate statistical power. Aim: The present meta-analysis was conducted to investigate the association between the C677T polymorphism and the risk of colorectal cancer. Materials and Methods: A literature search of the PubMed, Google Scholar, Springer link and Elsevier databases was carried out for potential relevant articles. Pooled odds ratio (OR) with corresponding 95 % confidence interval (95 % CI) was calculated to assess the association of MTHFR C677T with the susceptibility to CRC. Cochran's Q statistic and the inconsistency index (I2) were used to check study heterogeneity. Egger's test and funnel plots were applied to assess publication bias. All statistical analyses were conducted by with MetaAnalyst and MIX version 1.7. Results: Thirty four case-control studies involving a total of 9,143 cases and 11,357 controls were retrieved according to the inclusion criteria. Overall, no significant association was found between the MTHFR C677T polymorphism and colorectal cancer in Asian populations (for T vs. C: OR=1.03; 95% CI= 0.92-1.5; p= 0.64; for TT vs CC: OR=0.88; 95%CI= 0.74-1.04; p= 0.04; for CT vs. CC: OR = 1.02; 95%CI= 0.93-1.12; p=0.59; for TT+ CT vs. CC: OR=1.07; 95%CI= 0.94-1.22; p=0.87). Conclusions: Evidence from the current meta-analysis indicated that the C677T polymorphism is not associated with CRC risk in Asian populations. Further investigations are needed to offer better insight into any role of this polymorphism in colorectal carcinogenesis.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.59-66
• /
• 2013

Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.99-107
• /
• 1993

In this study, material nonlinear finite element program is developed to analyze reinforced concrete shell of arbitrary geometry considering tension stiffening effects. This study is capable of tracing the load-deformation response and crack propagation, as well as determining the internal concrete and steel stresses through the elastic, inelastic and ultimate ranges in one continuous computer analysis. The cracked shear retention factor is introduced to estimate the effective shear modulus including aggregate interlock and dowel action. The concrete is assumed to be brittle in tension and elasto-plastic in compression. The Drucker-Prager yield criterion and the associated flow rule are adopted to govern the plastic behavior of the concrete. The reinforcing bars are considered as a steel layer of equivalent thickness. A layered isoparametric flat finite element considering the coupling effect between the in-plane and the bending action was developed. Mindlin plate theory taking account of transverse shear deformation was used. An incremental tangential stiffness method is used to obtain a numerical solution. Numerical examples about reinforced concrete shell are presented. Validity of this method is studied by comparing with the experimential results of Hedgren and the numerical analysis of Lin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2C
• /
• pp.49-60
• /
• 2012

In this study, the behaviors of friction pile groups are investigated using 3D finite element (FE) analysis. The emphasis was quantifying on the shear load transfer (f-w) characteristics of pile groups and the shaft group effects. A framework for determining the f-w curve is proposed based on both theoretical analysis and field load test database. Through comparisons with case histories and FE results, it is shown that the proposed f-w curve is capable of predicting the behavior of a friction pile in deep soft clay. Additionally, a numerical analysis that takes into account the group efficiency factors were performed for major parameter on group pile-soil interaction, such as the pile spacing, pile arrangement, soil condition, and location of pile cap. Based on these results, the shaft group efficiency factors were also proposed.

• Journal of the Korean Home Economics Association
• /
• v.37 no.2
• /
• pp.127-144
• /
• 1999

The purposes of this study were to identify the housing maintenance cost, imputed rent fee and total housing cost of households living in rental house, to analyze the factors related to their housing maintenance cost, imputed rent fee and total housing cost and to investigate the factors contributing to total housing cost to total household income ratio. The data used for these purposes, was 97 KHPS of Daewoo Economic Research Institute. Sample size of households living in rental house, was 663. Statistics performed for the analysis were frequencies, percentiles, t-test, Lorenz cutie and Gini coefficient, Tobit analysis, OLS and Logistic analysis. The results of this study were as fellows: First, monthly cost of monthly rent & maintenance and repairs of households living in rental house with a deposit was lower than rental house, while the imputed rent fee of households living rental house with a deposit was higher than monthly rent households'And, total housing cost of households living in rental house with a deposit was higher than monthly rent households'. Second, Gini coefficient of the housing maintenance cost was 0.440, Gini coefficient of imputed rent fee was 0.362, and Gini coefficient of total housing cost was 0.291. Third, the variables related to their housing maintenance cost were family type, total household expenditure of socio-demographic characteristics and residence, type of rent, housing type of housing environmental factor. Also, the variables contributing to imputed rent fee were job type and educational attainment of household hearts, the number of family members, total household expenditure, residence, type of rent, housing type and tole number of rooms. In addition, the variables associated with total housing cost were job type and educational attainment of household head, total household income and residence, type of rent, housing type and the number of room. Finally, age, job type, educational attainment of household head, wife's employment status, the number of family members, family type, total household expenditure, residence, rent type of rent, housing type, the size of living space, and the number of room were significant variables contributing to total household cost to total household income ratio.

• Structural Engineering and Mechanics
• /
• v.64 no.3
• /
• pp.347-352
• /
• 2017

The poor maintenance practice increases the possibility of system failure. Subsequently, the consequences of failure fall on the aspects of output, safety and healthy, environmental integrity, system quality, and customer satisfaction. Conditionbased maintenance is seen as a potential strategy to improve performance. Whereby, the key success factor of this maintenance strategy is identified as the system inspection. This study aims to investigate the association between system breakdown rate and frequency of inspection. A mixed method approach is implemented by distributing questionnaire and interviewing for data collection. Subsequently, descriptive analysis, correlation analysis and regression are adopted to analyse the collected data from 100 respondents and the results are validated with interview data of 10 interviewees. The research result establishes significant relationship between the system breakdown rate and the frequency of inspection. Additionally, the result of regression analysis confirms that the frequency of inspection is the significant predictor of system breakdown rate. Planning of accurate inspection frequency is crucial to secure the system performance. Hence, the research signifies the importance to carry out regular inspection towards the building systems and components. As a recommendation, the maintenance personnel should assess the risk criticality of the building systems. Then, continuously monitor the condition of critical building systems; regularly inspect the condition of non-critical building systems and randomly inspect all of them.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.499-506
• /
• 2018

The number of demolition work is rapidly increasing because the middle- and high-rised buildings constructed over the rapid industrialization and urbanization have been deteriorated in social and structural aspects. However, theoretical approaches or studies related to the demolition cost prediction are still insufficient. Thus, this study derived and analyzed important factors affecting the fluctuation of the building demolition costs. 14 factors was derived through literature reviews and experts' interview, and the importance of each factor was analyzed to the each work(temporary work, structure demolition, and waste disposal) and the entire demolition work by using descriptive analysis. The survey results showed that the demolition costs was greatly influenced by environmental properties of the site. The results of this study can be used as a basis for estimating the approximate cost of the demolition work.