• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.539-563
• /
• 2022

Nine pig farms were evaluated for the welfare quality in Korea using animal- and environment-based parameters (particularly air quality parameters) during the winter of 2013. The Welfare Quality^® (WQ^®) protocol consists of 12 criteria within four principles. The WQ^® protocol classifies farms into four categories ranging from 'excellent' to 'not classified'. Each of these criteria has specific measures for calculating scores. Calculations for the welfare scores were conducted online using the calculation model in the WQ^® protocol. Environment-based parameters like microclimate (i.e., temperature, relative humidity, air speed, and particulate matter), bacteria (total airborne bacteria, airborne total coliform, and airborne total Escherichia coli), concentration of gases (carbon dioxide, ammonia, and hydrogen sulfide) were measured to investigate the relationship between animal- and environment-based parameters. Correlations between the results of animal- and environment-based parameters were estimated using spearman correlation coefficient. The overall assessments found that five out of nine farms were 'acceptable', and four farms were 'enhanced'; no farm was 'not classified'. The average score for the four principles across the nine farms, in decreasing order, were 'good feeding' (63.13 points) > 'good housing' (59.26 points) > 'good health' (33.47 points) > 'appropriate behaviors' (25.48 points). In the result of the environment aspect, the relative humidity of farms 2 (93.4%), 3 (100%), and 9 (98%) was much higher than the recommended maximum relative humidity of 80%, and four out of the nine farms had ammonia concentrations greater than 40 ppm. Ammonia had negative correlations with 'positive social behaviors' and positive emotional states: content, enjoying, sociable, playful, lively, happy and it had positive correlations with negative emotional states: aimless, distressed. The concentration of carbon dioxide had negative correlations with positive emotional states; calm, sociable, playful, happy and it had a positive correlation with negative emotional state; aimless. Our results indicate that the control of the environment for growing pigs can help improve their welfare, particularly via good air quality (carbon dioxide, ammonia, hydrogen sulfide).

• Journal of Information Processing Systems
• /
• 제16권2호
• /
• pp.394-405
• /
• 2020

The parameters of transmission lines have an influence on the electromagnetic environment surrounding the line. This paper proposes a method based on phasor measurement unit (PMU) and supervisory control and data acquisition (SCADA) to achieve online estimation of transmission line full parameters, such as resistance, reactance and susceptance. The proposed full parameter estimation method is compared with the traditional method of estimating resistance independently based on SCADA system. Then, the electromagnetic environment is analyzed based on the different parameter estimation methods. The example results illustrate that online estimation of transmission line full parameters is more accurate in the analysis of electromagnetic environment, which further confirms its necessity and significance in engineering application.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.157-164
• /
• 2003

The amount of information increases rapidly when working in a distributed environment where multiple collaborative partners work together on a complex product. Today's PDM (product data management) systems provide good capabilities regarding the management of product data within a single company. However, taking into account the variety of systems used at partner sites in an engineering environment one can easily imagine problems regarding the interoperability and the data consistency. This paper presents a concept to improve the workflow management using the parameters network. It shows a parameter driven engineering workflow that is able to manage engineering task across company boarders. We introduce a mechanism of workflow management based on the engineering parameters and an architecture of the distributed workspace to apply it within a PDM system. For a parameter mapping between CAD and PDM system we developed an XML-based CATIA data interface module using CAA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2174_2175
• /
• 2009

This Paper present about loop impedance characteristic based on korea internal electrical environment. Analysis parameters were touch voltage, electrical shock current and human body resistance. Result, For protect of electrical shock must measuring of loop impedance. And current capacity & loop impedance are must important parameters.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.326-326
• /
• 2018

The study will assess the seasonal effect of hydrological models on performance and parameters for streamflow simulation. TPHM, GR4J, CAT, and TANK-SM hydrological models will be applied for simulating streamflow in ten small and large watersheds located in South Korea. The readily available hydrometeorological data will be applied as an input to the four hydrological models and the potential evapotranspiration will be computed using the Penman-Monteith equation. The SCE-UA algorithm implemented in PEST will be used to calibrate the models considering similar objective functions bedside the calibration will be renewed to capture the seasonal effects on the model performance and parameters. The seasonal effects on the model performance and parameters will be presented after assessing the four hydrologic models results. The conventional approach and season-based results will be evaluated for each model in the tested watersheds and a conclusion will be made based on the finding of the results.

• Structural Engineering and Mechanics
• /
• 제39권2호
• /
• pp.187-206
• /
• 2011

This paper uses dynamic computer simulation techniques to develop and apply a multi-criteria procedure using non-destructive vibration-based parameters for damage assessment in truss bridges. In addition to changes in natural frequencies, this procedure incorporates two parameters, namely the modal flexibility and the modal strain energy. Using the numerically simulated modal data obtained through finite element analysis of the healthy and damaged bridge models, algorithms based on modal flexibility and modal strain energy changes before and after damage are obtained and used as the indices for the assessment of structural health state. The application of the two proposed parameters to truss-type structures is limited in the literature. The proposed multi-criteria based damage assessment procedure is therefore developed and applied to truss bridges. The application of the approach is demonstrated through numerical simulation studies of a single-span simply supported truss bridge with eight damage scenarios corresponding to different types of deck and truss damage. Results show that the proposed multi-criteria method is effective in damage assessment in this type of bridge superstructure.

• 대한원격탐사학회지
• /
• 제33권5_3호
• /
• pp.787-798
• /
• 2017

본 연구에서는 각기 다른 방법으로 내부표정 요소를 산출하였다. 내부표정 요소를 영상처리 과정에 적용하여 총 5개의 DSM(Digital Surface Models)을 제작한 뒤 정확도를 평가하였다. 내부표정 요소를 DSM 정확도의 독립변수로 활용하기 위해 DSM의 정확도에 영향을 줄 수 있는 비행요소와 외부표정 요소를 단일 고정변수로 설정하였다. 연구결과, campaign 3-2의 RMSE가 0.0305 m로 가장 양호한 결과를 보였다. 따라서 실험실 환경에서 카메라 검정 시스템을 이용하여 내부표정 요소를 확인한 뒤, 최적화를 통해 획득한 수정된 내부표정 요소를 이용해 DSM을 제작하는 것이 가장 정확도가 높은 DSM을 구축하는 방법으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.410-410
• /
• 2000

Impedance control is recognised as one of the most proper control scheme to carry out the assembly tasks, since it can control the dynamic relationship between the manipulator and environment directly. However, it is well known that the contact force cannot be controlled directly using the impedance control. Also impedance parameters should be properly defined depending on the task to be performed. We propose a new position based impedance control, which has self-adjusted impedance parameters and can control the contact force explicitly, Impedance parameters, as time-varying parameters, are adjusted automatically based on the measured contact force and the position error during the task. A proposed algorithm was implemented on the peg-in-hole task with the industrial manipulator. We shows the effectiveness of proposed control method experimentally.

• 제어로봇시스템학회논문지
• /
• 제21권10호
• /
• pp.936-943
• /
• 2015

This paper presents arc/line segments-based Simultaneous Localization and Mapping (SLAM) by updating accumulated laser sensor data with a mobile robot moving in an unknown environment. For each scan, the sensor data in the set are stored by a small constant number of parameters that can recover the necessary information contained in the raw data of the group. The arc and line segments are then extracted according to different limit values, but based on the same parameters. If two segments, whether they are homogenous features or not, from two scans are matched successfully, the new segment is extracted from the union set with combined data information obtained by means of summing the equivalent parameters of these two sets, not combining the features directly. The covariance matrixes of the segments are also updated and calculated synchronously employing the same parameters. The experiment results obtained in an irregular indoor environment show the good performance of the proposed method.

• 정보보호학회논문지
• /
• 제15권4호
• /
• pp.11-27
• /
• 2005

현재까지 제안된 대부분의 신원기반 키 동의 프로토콜은 단일 PKG(Private Key Generator) 환경을 고려하고 있다. 2002년에 Chen과 Kudla는 처음으로 다중 PKG 환경을 고려한 신원기반 2자간 키 동의 프로토콜을 제안하였지만 이들은 PKG의 마스터키를 제외한 다른 시스템 파라미터는 공유한다고 가정하고 있다. 그러나 PKG의 마스터키 이외에 다른 파라미터마저도 공유하지 않는 것이 보다 현실적인 가정이다. 이 논문에서는 시스템 파라미터를 공유하지 않는 각 PKG들로부터 개인키를 발급 받은 두 사용자들 간의 2자간 키 동의 프로토콜과 이를 확장한 두 가지 버전의 3자간 키 동의 프로토콜을 제안한다. 제안된 2자간 키 동의 프로토콜은 다중 PKG 환경에서 최소의 pairing 연산량을 요구하며, 제안된 3자간 키 동의 프로토콜은 다중 PKG 환경에서 기존의 3자간 키 동의 프로토콜들에 비해 효율적이다. 또한 제안된 키 동의 프로토콜들은 키 동의 프로토콜의 보안 요구사항을 만족한다.