• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.153-165
• /
• 2014

Carbon dioxide capture and storage (CCS) technology is recognizing one of method responding the climate change with reduction of carbon dioxide in atmosphere. In Korea, due to its geological characteristics, sub-seabed geological $CO_2$ storage is regarded as more practical approach than on-land storage under the goal of its deployment. However, concerns on potential $CO_2$ leakage and relevant acidification issue in the marine environment can be an important subject in recently increasing sub-seabed geological $CO_2$ storage sites. In the present study effect data from literatures were collected in order to conduct an effect assessment of elevated $CO_2$ levels in marine environments using a species sensitivity distribution (SSD) various marine organisms such as microbe, crustacean, echinoderm, mollusc and fish. Results from literatures using domestic species were compared to those from foreign literatures to evaluate the reliability of the effect levels of each biological group and end-point. Ecological effect guidelines through estimating level of pH variation (${\delta}pH$) to adversely affect 5 and 50% of tested organisms, HC5 and HC50, were determined using SSD of marine organisms exposed to the $CO_2$-induced acidification. Estimated HC5 as ${\delta}pH$ of 0.137 can be used as only interim quality guideline possibly with adequate assessment factor. In the future, the current interim guideline as HC5 of ${\delta}pH$ in this study will look forward to compensate with supplement of ecotoxicological data reflecting various trophic levels and indigenous species.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.147-153
• /
• 2017

The purpose of this study was to isolate Escherichia coli from flies and to assess pathogenic genes and antibiotic resistance of the isolates. A total of 188 flies were captured in agricultural environment including fruits farms (n = 19), fermented soybean farms (n = 9), municipal waste (n = 46), livestock farms (n = 66), slaughterhouses (n = 38), and manure ground (n = 10). E. coli isolates of captured flies were tested for pathogenic gene and antibiotic resistance using PCR methods and VITEK2 systems. As a result, E. coli from 63% (119/188) of the captured flies has been detected, and the detection rate of E. coli was the highest (89%, 31/34) in flies captured at particular slaughterhouse. Of the 34 isolates, 94% (32/34) were pathogenic gene (ST gene) positive. Twenty-six percent (31/119) of the E. coli isolates were observed being resistant to one or more antibiotics. Markedly, one of E. coli isolates from Livestock farms was resistant to 7 antibiotics including ampicillin, ampicillin/sulbactam, cefazolin, cefotaxime, gentamicin, levofloxacin, and trimethoprim/sulfamethoxazole. In addition, it was ESBL positive. The results of the present study may suggest a risk of transmission of pathogenic and antimicrobial resistant bacteria from flies to livestock environment Therefore, it may need to prevent introducing flies into the agricultural production environment for safe food production.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• Journal of Nutrition and Health
• /
• v.57 no.1
• /
• pp.136-152
• /
• 2024

Purpose: A comprehensive evaluation item was developed to assess adolescent dietary habits and nutritional practices, considering food intake, eating behaviors, and food culture, such as social support and food environment. Methods: The 59 candidate items of the evaluation checklist were obtained based on the results of the eighth Korea National Health and Nutrition Examination Survey data, Korea Dietary Reference Intakes, dietary guidelines for adolescents, Youth Risk Behavior Survey data, national nutrition policies and dietary guidelines, and literature reviews. Four hundred and three middle and high school students residing in metropolitan areas participated in a survey using the 58-item checklist, which was selected through expert evaluation and content validity ratio analysis. The construct validity of the assessment tool for the quality of adolescent diets was assessed by exploratory factor analyses to determine if the checklist items were organized properly and whether the responses to each item were distributed adequately. Results: The Bartlett sphericity test was significant for each area (p <0.001), and the eigen values were greater than one. The Kaiser-Meyer-Olkin and cumulative proportions by areas were food intake (0.765 and 56.8%, respectively), eating behaviors (0.544 and 64.8%, respectively), and food environment (0.699 and 62.4%, respectively). Twenty-two checklists were determined for the final evaluation items for the adolescents' dietary habits and nutritional practices and were categorized into three distinct factors: food intake (10 items), eating behaviors (4 items), and food environment (8 items). Conclusion: The evaluation items for adolescent dietary habits and nutritional practices is a useful checklist for easily and quickly assessing the dietary qualities and reflecting Korean adolescents and their food environmental factors related to a sustainable diet.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.509-517
• /
• 2017

This study was conducted to assess effect of thiacloprid fogging on non-target insect communities in Korean white pine forests. In addition, we assessed effect of thiacloprid fogging on mortality of Monochamus saltuarius as a vector of pine wood nematodes, and Apis mellifera as a non-target species. We compared abundance, species richness, and compostion of insects, and mortality of two insects among four treatment groups (control and thiacloprid-fogged groups with 3 different doses) located in the Kangwon National University Forest. For sampling of insects, 6 pitfall and 2 multi-funnel traps and 3 waterproof cloth sheets were placed in each study plot. In addition, M. saltuarius and A. mellifera were put into each meshed cage which installed at 7 m and 15 m heights in center of each study plot. Thiacloprid was fogged only once (middle May) in each plot using a fogging machine. Overall, thiacloprid fogging was appeared to be low toxicity to the abundance, species richness, and compostion of insects and mortality of A. mellifera, while it seems effectively impact on the mortality of M. saltuarius. However, thiacloprid fogging seems more influenced by microclimates in forests because the mortality of M. saltuarius in mesh cages was different according to heights and spatial locations. To control the population density and dispersal of M. saltuarius using by fogging techniques, therefore, it may be necessary to minimize the uncertainty about the effectiveness of thiacloprid fogging by improving the fogging techniques.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2010

The paper describes the objectives of Yellow Sea Large Marine Ecosystem (YSLME) project, focusing on procedural and practical aspects. YSLME is a highly productive sea yet possibly one of the most impacted large marine ecosystems, in terms of anthropogenic stressors, due the enormous coastal population. The aim of the YSLME project is the reduction of ecosystem stress through identification of the environmental problems in the Transboundary Diagnostic Analysis (TDA) that are then addressed in the Strategic Action Programme (SAP). One of the major problems found to be affecting biological diversity is habitat modification through wetland reclamation, conversion and degradation. Since the early 1900's more than 40% of intertidal wetlands have been reclaimed in Korea, and 60% of Chinese coastal wetlands have been converted or reclaimed. Damaging fishing practices, pollution and coastal eutrophication have further degraded the coastal environment reducing the biological diversity. To combat this loss, the YSLME project has mounted a public awareness campaign to raise environmental consciousness targeted at all different levels of society, from politicians at parliamentary workshops, local government officer training events, scientific conferences and involvement of scientists in the project research and reporting, to university and high school students in our visiting internship programmes and environmental camps. We have also built networks through the Yellow Sea Partnership and by liaising and working with other environmental organizations and NGOs. NGO's are recognised as important partners in the environmental conservation as they already have extensive local networks that can be lacking in international organisations. Effective links have been built with many of these NGOs through the small grants programme. Working with WWF's YSESP project and other academic and research institutions we have conducted our own biodiversity assessments that have contributed to the science-based development of the SAP for the YSLME. Our regional targets for biodiversity outlined in the SAP include: Improvements in the densities, distributions and genetic diversity of current populations of all living organisms including endangered and endemic species; Maintenance of habitats according to standards and regulations of 2007; and a reduction in the risk of introduced species. Endorsement of the SAP and its successful implementation, during the proposed second phase of the YSLEM project, will ensure that biological diversity is here to benefit future generations.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.88-94
• /
• 2014

Among pre-harvest environmental factors, increasing attention has been paid to the effects of chemical and microbiological factors on fresh produce. The occurrence and prevalence of these factors have been usually studied with regard to the final products at the post-harvesting stage and/or when they are sold in the market. However, the origin and routes of transmission of both factors remain to be clarified. In the present study, we examined the contamination levels of food-borne pathogens and chemical factors such as pesticide residues and heavy metals in 83 and 43 samples, respectively, including various soil, water, and fertilizer samples, as well as post-harvested and processed samples. Among the organic farming samples, only one pesticide, dimethomorph, was detected in the soil sample, however no pesticides were observed from any other samples in organic farming system. Thus, it was thought that might be contaminated from conventional farm land in the vicinity. Whereas many pesticide residues were detected in conventional farming systems such as soil, fertilizer, water, and fresh produce as expected. Furthermore, heavy metals detected from all tested samples did not shown contamination levels higher than the standard limit. We comparatively assessed the levels of contamination by food-borne pathogens on the samples from organic and conventional farming systems, and found aerobic bacteria at approximately 7 log CFU/g, with no significant differences observed between the two systems. Coliforms were present at lower levels than aerobic bacteria. No human pathogens were present among the coliforms detected, indicating that these bacteria are saprophytes without the ability to cause food-borne illnesses. In contrast, among the high-risk food-borne pathogens, only sporadic cells of Bacillus cereus were found on samples of organic farming system. These data extend previous findings that the most prevalent food-borne pathogen is B. cereus and demonstrate that it spreads to whole living plants via soil.

• Korean Journal of Psychosomatic Medicine
• /
• v.7 no.2
• /
• pp.213-225
• /
• 1999

Objectives : The purpose of this study was to investigate how the play habits, temperament, and environmental factors might affect childhood obesity. Methods : Two hundred sixty children, aged 4 through 6 years living in Seoul & Cheonan were surveyed by a questionnaire about the children's play habit and the parent's related factors such as weight, height, education, income. In addition the Korean version of the Parent Temperament Questionnaire for Children and the Korean version of the Family Environment Scale were also administered to parents of those children. The height and weight of those children were measured and the percentage of body fat was measured by Bioelectrical Impedance Fatness Analyzer. Result : 1) Among 260 children, 25 children were considered to be obese on the basis of both obesity index and percentage of body fat. 2) Parents of obese children showed a significantly higher educational level(p<0.05) and mothers of obese children had significantly more jobs(p<0.05) and showed higher body mass index(p<0.05) than those of nonobese children. 3) By observing play habits of children, obese children spent significantly longer time in watching TV and video(p<0.05), while nonobese children showed a trend to play outside(p<0.1). 4) On the Korean version of the Parent Temperament Questionnaire for Children, obese children showed significantly less activity than nonobese ones(p <0.05). 5) Family of obese children had significantly higher point on subscale of Achievement orientation, Intellectual-cultural orientation and Moral-religious emphasis of the Korean version of the Family Environment Scale(p<0.05). 6) Percentage of body fat of obese children was correlated with children's watching TV time, activity level, scores of Achievement orientation, Intellectual-cultural orientation of the Korean version of the Family Environment Scale and the both parent's education levels(p<0.05). Conclusion : Obese children showed hypoactivity and more watching TV time. And obese children's both parent had higher educational level and their mother had higher Body Mass Index and more jobs. Family of obese children had higher point on items of Achievement orientation, Intellectual-cultural orientation and Moral-religious emphasis. Family environmental factors influence on children's obesity through interaction of genetic and behavioral-psychological factors concomittently.