• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.227-230
• /
• 2011

Pulps were separated from wood chips using an Electron beam irradiation (EBI) treatment without a NaOH-AQ (anthraquinone) treatment for cooking. The methods were based on a hot water treatment after EBI and two-step bleaching processes. Chemical compositions and FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached wood pulps treated with various EBI dose decreased with an increase of EBI doses. Specifically, the lignin in the bleached with pulps treated at 600 kGy of EBI dose was almost completely removed. Moreover, TGA analysis showed that a thermal stability increased with increasing the content of cellulose but the lignin decomposed slowly over the wide region.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.149-154
• /
• 2013

In this study, the simple preparation of poly(sodium 4-styrenesulfonate) (PSS)-patterned substrate via a selective ion irradiation was investigated to manipulate cell adhesion. PSS thin films spin-coated onto the hydrophobic polystyrene (PS) was patterned through masked 150 keV proton irradiation followed by developing with deionized water. The characteristics of the resulting PSS-patterned surfaces were investigated by using microscope, surface profiler, FT-IR, XPS, and contact angle analyzer. These analytical results revealed that the resolved $100{\mu}m$ PSS patterns were formed on the hydrophobic PS surface above the fluence of $1{\times}10^{15}ions\;cm^{-2}$ and the chemical structure, composition, and wettability of the PSS patterns were dependant on a fluence. Moreover, the results of the in-vitro cell culture and proliferation assay exhibited that H1299 cells preferentially adhered and proliferated onto the more hydrophilic PSS part of the PSS-patterned PS and the well-aligned cell patterns was formed on the PSS-patterned PS particularly at the fluence of $1{\times}10^{15}ions\;cm^{-2}$.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.4
• /
• pp.190-196
• /
• 2016

The objective of this study is to obtain the optimal conditions to remove hydrogen fluoride (HF) generated from a variety of F-gas treatment processes. First, we selected $Ca(OH)_2$ and $CaCO_3$ as a reactant among the various alkali salts which have a high removal efficiency and a competitive price by forming a calcium fluoride precipitate. Additionally, various factors were investigated to improve the removal efficiency of HF. The conditions such as the settling time, agitating time and intensity, reaction temperature, and pH were considered as main factors. As a result, in the treatment process to remove HF through Ca-based alkali salts, the optimal conditions were a 120 min settling time, 30 min of agitation at 100 rpm, a pH of 4-8, and a reaction temperature of $40^{\circ}C$.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.7
• /
• pp.289-313
• /
• 1997

The value of 21 century travel originnate from increasing hate about environment pollution and contirmation of quality of life. Therefore the role of travel industry will developo into travel industry that travel information and knowledge unite with service under computer Reservation system out of basic travel work(counsel, agency, mediation, service, sale) So, a view of the travel industry that it is as following. 1. Operrating CRS of travel industry. 2. Constantly development of travel product and service. 2. Constantly development of travel product and service. 3. Pursuide to humanity and nature 4. Travel for keeping natural environment. 5. Establishment of new travel law. In conclusion, we certity our lappiness through travel and create new travel culture.

• Journal of Radiation Industry
• /
• v.4 no.3
• /
• pp.285-288
• /
• 2010

Polyimide films have excellent thermal stability, reliable mechanical properties and low dielectric constant. Therefore, this material is widely used in many industrial fields such as microelectronics, flexible circuits, semiconductor products and aerospace materials. In space applications, earth-orbiting hardware operates in environments that generally include neutral particles, charged particles such as trapped protons and electrons, solar protons, and cosmic rays. Under these conditions, polyimide films were changed in the optical, electrical and mechanical properties. Therefore, in this study, we evaluated the effects of electron beam irradiation on polyimide. The O-H functional groups were created on the polyimide film surface in the results of FT-IR spectra. And it was found that the dielectric constants were changed as a function of electron beam dose.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.167-170
• /
• 2013

Lignin can be a valuable natural chemical resource. Structurally, lignin is a three-dimensional polymer made up of condensed C-C bonds and some ether linkages, most of which are not readily degraded. In this study, lignin carbonization under various electron beam pretreatment conditions was characterized through a thermogravimetric analysis (TGA), X-ray diffraction (XRD) and Raman spectroscopy. Lignin stabilization was controlled by various doses of electron beam irradiation corresponding to 50, 100, 200, 500 and 1,000 kGy; the carbonization process was performed under a nitrogen gas atmosphere at $1000^{\circ}C$ for 1 h. The TGA results showed that a 1,000 kGy lignin dose increased the residue weight from 39.96% to 45.23%, compared to non-irradiated lignin. This observation is in agreement with the XRD and Raman spectroscopy results, in which the two theta degrees and the degree of crystallization were improved by increasing the electron beam irradiation.

• Hwankyungkyoyuk
• /
• v.13 no.1
• /
• pp.23-36
• /
• 2000

As the environmental industry grew bigger and bigger, the corcern about environmental condition increased and the demand of environmental expert tended to be much more increased. A lot of universities therefore established environment-related departments on campuses and ended up with producing numerous students every single year. However, some problems such as followings were in this study. First, the industry cannot adopt all the students directly from universities due to their low capabilities in environment affairs. Second, the universities yield much more students than the industry can actually adopt. In order to yield the appropriate students meeting the expectation of the industry, it is necessary to permit no more new department established on campus and to adopt new environmental field such as environmental management, eco-auditing and also 3+1 lecture system focused on real affairs.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.492-500
• /
• 2014

The defense industry export of Korea has been steadily risen since 2006. It is attained $340million, the highest export amounts ever, in 2013. As the defense industry export increase, Defense Acquisition Program Administration (DAPA) built defense industry export and import management system to assist export and to protect defense technologies. In this paper, we study factors to activate the defense industry export and import management system using Technology Acceptance Model(TAM) in compulsive usage environment. The significance of this study is as follows: First, we prove the reliability and feasibility of measurement variables in defense industry of compulsive usage environment. Second, we suggest factors to activate the defense industry export and import management system. Third, we present methodology to find factors in computation systems of public institute using TAM.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.11
• /
• pp.39-53
• /
• 2020

Purpose: With a rapid advance of communication technology, distributional systems of sport contents continue to show improvements. In particular, a traditional framework in creating sport cartoon has been influenced by the environment of the communication industry. Despite the development of distributional systems, the current sport cartoon industry still lacks in advancement. To this day, various research about sport contents have been conducted; yet, not many studies of the interaction between sport cartoons and communication technology have been done. In this respect, this study is to review the distributional environment of the sport cartoon industry and provide distributional strategies for developing sport cartoon industry. Research design, data, and methodology: In addition to in-depth interviews with five practitioners in sport cartoon industry, the study employed case study methodology. Interview data were analyzed by qualitative content analysis. Results: With new environments allowing anyone allowing to create and share webtoons, various genres including sports webtoons appear, and this became amotive to the growth of sports webtoons. Today, sports comics acted as a sports advertisement platform which not only created additional profit but also became an opportunity as a marketing method. On the contrary, the formal attributes of webtoons cause hardship in consistently creating sports webtoons. Hence, it is needed that supporting policies need to be established to nurture sport webtoon expertise. For example, Korea Creative Content Agency allows future webtoon authors to have an opportunity to be educated and equipped in producing creative sport webtoon contents. Moreover, revenue systems should be developed for motivating webtoon authors to involve in sport contents in their works. Conclusions: In order to promote the sports cartoon industry based on the findings, it is first necessary to create sports comics that reflect the formal characteristics of webtoons and the changing consumer environment. Second, it is important to acknowledge the industrial value of sports comics and it is necessary to promote policies regarding sports webtoon production and distribution from a national level. Third, by diversifying profits through OSMU and sports advertisements, it is possible to enhance the work environment and the treatment of authors. Implications and future directions were discussed.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.74-78
• /
• 2010

In this paper, crosslinked polyethylene (PE) separators for lithium secondary batteries were prepared by an electron beam irradiation under various beam currents and dose rates. The crosslinking degree increased up to maximum 71% with an increasing absorption dose and with a decreasing beam current. The PE separators irradiated at lower beam currents showed better thermal shrinkage (51%) and mechanical properties than the original PE separator and PE separators irradiated at higher beam current. The ionic conductivity ($1.01{\times}10^{-3}\;S/cm$) and electrolyte uptake (275%) of the crosslinked PE separators were comparable to the original PE separator.