• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.273-281
• /
• 2012

The government is carrying forward a sustainable development which reduces green-house gas and environmental pollution by preparing 'Low Carbon Green Development' policy basis as a new paradigm of national development. This study aims to understand the status of atmosphere contamination which Seoul has by finding correlation among social, economical indexes and carbon, the humanities and social characteristic materials which best express types of city and correlation and to suggest implications. According to the results of the analysis, first the carbon emission volume of Seoul recorded 0.56 ppm, Jongno, Jung-Gu, Kuro, Kangnam and Songpa were more than the average of Seoul and Kwangjin-Gu & Kangbuk-Gu, relative north east regions, Yeongdeungpo-Gu and Dongjak-Gu, south west regions showed lower CO occurrences. Second, according to the correlation and factor analysis, elements which affect CO emission volume of Seoul are largely represented by regional level, traffic level and development density level. Third, when the importance of influence factors based on the analyzed standard coefficient by a regression model, traffic and development density level were most important by recording traffic level (0.967), environmental level (0.385), regional level (0.530) and development density (0.561). Consequently, it was revealed that the traffic level most affected CO emission.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.161-165
• /
• 2005

Recently, it is on the increase interest for Al alloy with new material for ship application to substitute for FRP ship. The reason is thatAl alloy ship has beneficial characteristics such as high sea speed, increase of loadage and easy to recycle compared with FRP ship. In this paper, mechanical and electrochemical properties are investigated by slow strain rate test experiment in various applied potential condition. These results will provide as reference data to design ship by deciding optimum protection potential regard to hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys are not corroded with forming film which has the corrosion resistance property in neutral solution. However, it was observed that formation and destruction of passive film by $Cl^-$ ion in sea water environment. At comparison of current density after 1200 sec in potentiostatic experiment, the current density in the potential range of -0.68 $\~$-1.5 V is shown low value. The low current density means protection potential range. Elongation in applied potential of 0 V was high. However, the corrosion protection application in this condition is impossible potential because the toughness is low value by decreasing strength by active dissolution reaction at parallel part of specimen. The film composed with $CaCO_3$ and $Mg(OH)_2$ has a corrosion resistance property. However, the uniform electrodeposition coating at below -1.6 V potential is not formed since the time to form the uniform electrodeposition coating is short. Therefore, it is concluded that mechanical property is poor because effect by hydrogen gas generation is larger than that of electrodeposition coating. It is concluded that the optimum protection potential range from comparison of_maxim urn tensile strength, elongation and time to fracture is -1.3$\~$0.7 V (SSCE).

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2311-2316
• /
• 2014

Conformations and vibrational frequencies of the racemic (2RS,3RS)-5-amino-3-(4-phenylpiperazin-1-yl)-1,2,3,4-tetrahydronaphthalen-2-ol-(I) [(2RS,3RS)-(I)], a precursor of benzovesamicol analogues, have been carried out using various DFT methods (M06-2X, B3LYP, B3PW91, PBEPBE, LSDA, and B3P86) with basis sets of 6-31G(d), 6-31+G(d,p), 6-311+G(d,p), 6-311++G(d,p), cc-pVTZ, and TZVP. The LSDA/6-31G(d) level of theory shows the best performance in reproducing the X-ray powder structure. However, the PBEPBE/cc-pVTZ level of theory is the best method to predict the vibrational frequencies of (2RS,3RS)-(I). The potential energy surfaces of racemic pairs (2RS,3RS)-(I) and -(II) are obtained at the LSDA/6-31G(d) level of theory in the gas phase and in water. The results indicate that (2RS,3RS)-(I) are more stable by ~0.75 kcal/mol in energy than (2RS,3RS)-(II) in water, whereas conformer AIIg and BIIg are more stable by ~0.04 kcal/mol than AIg in gas phase. In particular, the hydrogen bond distances between the N of piperazine and the OH of tetrahydronaphthalen become longer in gas, compared with those in the water phase. Vibrational frequencies calculated at the PBEPBE/cc-pVTZ level of theory in the gas phase are larger than those in water, whereas their intensities in the gas phase are weaker than those in water.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.146-153
• /
• 2013

CNG buses has contributed to improve air quality in cities. But it is difficult to meet the next emission regulations such as EURO-VI without the help of additional post-processing device. Hydorgen has higher flame speed and lower combustion temperature that make it thermal efficiency increase with leaner operation. Using hydrogen natural gas blend (HCNG) fuel is promising technology which can reduce $NO_x$ and $CO_2$ emissions for a natural gas vehicle. However, fuel flow rate of HCNG should be increased since hydrogen's energy density per volume is much smaller than natural gas. In the present study, the characteristics of fuel supply system and its applicability were evaluated in a heavy duty natural gas engine. The results showed that the potential of fuel pressure regulator and fuel metering valve had enough capacity with HCNG. Employed mixer did not affect the distribution characteristics of mixture.

• Monthly Notices of the Royal Astronomical Society
• /
• v.491 no.3
• /
• pp.4045-4056
• /
• 2020

We examine whether galaxy environments directly affect triggering nuclear activity in Sloan Digital Sky Survey (SDSS) local spiral galaxies using a volume-limited sample with the r-band absolute magnitude M_r < -19.0 and 0.02 <z< 0.055 selected from the SDSS Data Release 7. To avoid incompleteness of the central velocity dispersion σ of the volume-limited sample and to fix the black hole mass affecting AGN activity, we limit the sample to a narrow σ range of 130 km s^-1 <σ< 200 km s^-1. We define a variety of environments as a combination of neighbour interactions and local density on a galaxy. After the central star formation rate (which is closely related to AGN activity level) is additionally restricted, the direct impact of the environment is unveiled. In the outskirts of rich clusters, red spiral galaxies show a significant excess of the AGN fraction despite the lack of central gas. We argue that they have been pre-processed before entering the rich clusters, and due to mergers or strong encounters in the in-fall region, their remaining gases efficiently lose angular momentum. We investigate an environment in which many star-forming galaxies coexist with a few starburst-AGN composite hosts having the highest [O_III] luminosity. We claim that they are a gas-rich merger product in groups or are group galaxies in-falling into clusters, indicating that many AGN signatures may be obscured following the merger events.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

This study was performed with electrolysis treatment method for improving anaerobic digestion gas production efficiency in a sewage sludge, thereby confirmed in anaerobic digestion production and denitrification effect. As a result, solubilization was increased by increasing treatment time of electrolysis and current density, also showed to be 9.02% with 10 mA/cm2 of current density in 4 mm electrode distance. Based on the results of BMP test used the above experiment, methane production was 0.49 L CH4/g VS, and increased by 88.4% compared with control groups. As for the results of denitrification using the sewage sludge treated with the same conditions, denitrification rate appeared $19.2mg\;NO_3{^{-}}N/g\;MLVSS{\cdot}hr$, and through the sewage sludge treated with electrolysis, it can be applied to anaerobic digestion and denitrification process by increasing biodegradation.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.324-330
• /
• 1999

$Si_3N_4$-$TiB_2$ with 2 wt% $Al_2O_3$ and 4 wt% $Y_2O_3$ additives was hot pressed in a flowing $N_2$ environment with varying $TiB_2$ content from 10 to 50 vol%. Variations of mechanical (hardness, fracture toughness, and flexual strength), and tribological properties as a function of $TiB_2$ content were investigated. As the content of $TiB_2$ increased, relative density decreased due to the chemical reaction of $TiB_2$in $N_2$ environment. The reduction of density causes mechanical properties to be degraded with an increase of $TiB_2$ in $Si_3N_4$. Tribological properties were dependent of microstructure as well as mechanical properties, however, they were degraded strongly by the chemical reaction of $Si_3N_4$-$TiB_2$ during hot pressing in $N_2$ environment. SEM and TEM observations, and X-ray diffraction analysis that the chemical reaction products at the interface are TiCN, Si, and $SiO_2$. Also, the comparison of XRD patterns of the $Si_3N_4$-40 vol% $TiB_2$ composites hot pressed at $1,750^{\circ}C$ for 1 hour between in $N_2$ and in Ar gas was made. The XRD peaks of Si and $SiO_2$ were not found in Ar, but still a weak peak of TiCN was presented.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.205-212
• /
• 2011

The potential factors for quality loss of cleaned fresh ginseng and technology to be associated with the improvement of marketability through pre-packaging fumigation were examined. Major microorganisms isolated from fresh ginseng included Botrytis cinerea, and Erwinia sp. Others such as Cylindrocarpon sp., Fusarium spp., Pennicilium spp., Bacillus spp. were also found at relatively low frequency. The bacterial density of vacuum packaged fresh ginseng rapidly increased during simulated marketing. Little correlation between bacterial growth and package swelling was found. In order to improve packaging method of fresh ginseng, pre-packaging treatment of 2-phenylethyl alcohol (PE, 100 uL/L, 4 hr) was examined. The fumigation treatment effectively inhibited the growth of bacteria density and also effective on keeping firmness of ginseng root, especially in cortical portion. The internal gas compositions of plastic container packaged for ginseng were approximately ranged between 6 to 8% $O_2$and 3 to 4% $CO_2$. The $O_2$ level of fumigation treatment was lower than control whereas $CO_2$ level was higher. The upsurge of ethylene evolution I day after simulated marketing was found only in fumigation treatment but it returned to ordinary level at day 2. The sucrose content of 2-PE treatment was significantly reduced at 5 days after simulated marketing but reducing sugars like glucose and fructose remained at higher level. The difference in sugar levels was reduced after 10 days of simulated marketing. The decay of fresh ginseng began at the lateral or fine root, which is weak to physical damage, in general. The epidermis was more damaged. Plastic container packaging with PE fumigation could be an alternative to vacuum packaging, which allows an aerobic environment and prevents anaerobic respiration. Further study of pre-package fumigation is required to improve technology of fresh ginseng marketing.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.69-80
• /
• 2009

We investigate the dependence of star formation rate and Active Galaxy Nuclei (AGN) frequency on the bar properties, especially the bar strength, using SDSS DR6. To better represent the bar strength, we divided the bars into 6 classes according to their length and axial ratios. There seems to be a fairly good correlation between the star formation rate derived from $H{\alpha}$ emission lines and the bar strength, whereas there is no apparent correlation between the AGN activity and the bar strength. We interpret that the former correlation is due to the dependence of bar-driven gas inflow on the strength of bar. The lack of correlation between AGN and bar properties suggests that the accretion of gas onto a supermassive black hole (SMBH) is regulated by the interplay between the bar and SMBH. The frequency of AGN seems to be dependent on the background density but the star formation rate does not. It suggests that star formation is a localized phenomenon that is mostly determined by the gas density in a galaxy, while AGN activity is more closely related to the host property such as mass and luminosity that are thought to be dependent on the environment through the density-luminosity relation.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.139-147
• /
• 2019

In this study, an experiment was conducted to evaluate the properties of cement matrix using diatomite and silica gel as adsorbents of radon. The adsorption properties of diatomite of a natural adsorbent and silica gel of an artificial sorbent were examined to confirm the reduction of radon gas concentration of the removal of radon gas in the indoor environment of the human body. We conducted a performance evaluation for the study. The fluidity, air content, density, absorption, flexural failure load, thermal conductivity and radon gas concentration of the specimen using diatomite and silica gel were measured. the fluidity and the air content of the adsorbed matrix with diatomite were decreased as the diatomite replacement ratio increased. Which seems to affect the subsequent matrix by the absorption of the compounding water of diatomite. As the replacement rate of silica gel increased, the fluidity decreased and the air content increased up to constant replacement rate. It is judged that the surface of the silica gel has a critical point at which it can react with moisture.