• Journal of Korean Society on Water Environment
• /
• v.18 no.2
• /
• pp.103-112
• /
• 2002

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.192-196
• /
• 2005

Abstract Oligotrophic microbial fuel cells (MFCs) were tested for the continuous monitoring of low biochemical oxygen demand (BOD) by using artificial wastewater, containing glucose and glutamate, as check solution. Ten times diluted trace mineral solution was used to minimize the background current level, which is generated from the oxidation of nitrilotriacetate used as a chelating agent. The feeding rate of 0.53 ml/min could increase the sensitivity from 0.16 to 0.43 ${\mu}$A/(mg BOD/l) at 0.15 ml/min. The dynamic linear range of the calibration curve was between 2.0 and 10.0 mg BOD/l, and the response time to the change of 2 mg BOD/l was about 60 min. The current signal from an oligotroph-type MFCs increased with the increase in salts concentration, and the salt effect could be eliminated by 50 mM phosphate buffer.

• Carbon letters
• /
• v.16 no.1
• /
• pp.41-44
• /
• 2015

We report the preparation of sulfonated reduced graphene oxide (SRGO) by the sulfonation of graphene oxide followed by radiation-induced chemical reduction. Graphene oxide prepared by the well-known modified Hummer's method was sulfonated with the aryl diazonium salt of sulfanilic acid. Sulfonated graphene oxide (SGO) dispersed in ethanol was subsequently reduced by ${\gamma}$-ray irradiation at various absorbed doses to produce SRGO. The results of optical, chemical, and thermal analyses revealed that SRGO was successfully prepared by ${\gamma}$-ray irradiation-induced chemical reduction of the SGO suspension. Moreover, the electrical conductivity of SRGO was increased up to 2.94 S/cm with an increase of the absorbed dose.

• Educational Technology International
• /
• v.12 no.1
• /
• pp.67-94
• /
• 2011

The major concern of e-learning environment design is to create and improve artifacts that support human learning. To facilitate effective and efficient learning, e-learning environment designers focused on the contemporary information technologies. Web 2.0 services, which empower users and allow the inter-transforming interactions between users and information technologies, have been increasingly changing the way that people learn. By adapting these Web 2.0 technologies in learning environment, educational technology can facilitate learners' abilities to personalize learning environment. The main purpose of this study is to conceptualize comprehensively constructs for understanding the inter-transforming relationships between learner and learning environment and mutable learning environments' impact on the process through which learners learn and strive to shape their learning environment. As results, this study confirms conceptualization of four constructs by incorporating aspects of design that occur in e-learning environments with Web 2.0 technologies. First, learner-designer refers to active and intentional designer who is tailoring an e-learning environment in the changing context of use. Second, learner's secondary design refers to learner's design based on the primary designs by design experts. Third, transactional interaction refers to learner's inter-changeable, inter-transformative, co-evolutionary interaction with technological environment. Fourth, trans-active learning environment refers to mutable learning environment enacted by users.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.80-87
• /
• 2020

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.69-80
• /
• 2020

A Rayleigh Lidar used for wind detection works by transmitting laser pulses to the atmosphere and receiving backscattering signals from molecules. Because of the weak backscattering signals, a lidar usually uses a high sensitivity photomultiplier as detector and photon counting technology for signal collection. The capturing of returned extremely weak backscattering signals requires the lidar to work on dark background with a long time accumulation to get high signal-to-noise ratio (SNR). Because of the strong solar background during the day, the SNR of lidar during daytime is much lower than that during nighttime, the altitude and accuracy of detection are also restricted greatly. Therefore this article describes an ultra-narrow bandwidth filter (UNBF) that has been developed on 354.7 nm wavelength of laser. The UNBF is used for suppressing the strong solar background that degrades the performance of Rayleigh wind lidar during daytime. The optical structure of UNBF consists of an interference filter (IF), a low resolution Fabry-Perot interferometer (FPI) and a high resolution FPI. The parameters of each optical component of the UNBF are presented in this article. The transmission curve of the aligned UNBF is measured with a tunable laser. Contrasting the result of with-UNBF and with-IF shows that the solar background received by a Licel transient recorder decreases by 50~100 times and that the SNR with-UNBF was improved by 3 times in the altitude range (35 km to 40 km) compared to with-IF at 10:26 to 10:38 on August 29, 2018. By the SNR comparison at four different times of one day, the ratio-values are larger than 1 over the altitude range (25~50 km) in general, the results illustrate that the SNR with-UNBF is better than that with-IF for Rayleigh Lidar during daytime and they demonstrate the effective improvements of solar background restriction of UNBF.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.169-178
• /
• 2010

This study was motivated by the attempt to examine from versatile viewpoints the structural relationship between industrial environment, technology orientation and performances which are all factors related to technical innovation of small and medium-sized companies. In this regard, a survey was conducted to investigate the late industrial environment that could have direct and indirect impacts on the technology orientation of small and medium industry and, based on the survey, an analysis was carried out to determine the effects of its technology orientation on the performances in the technological innovation and management. The outcomes of the analysis could be summed up as follows: First, the factors of technology orientation turned out to have influence on those of industrial environment, which suggests the needs for the small and medium industry to consider the factors of industrial environment at multiple levels. Second, the technology orientation was found to influence the performances of technology innovation and management of small and medium industry in a structural manner, which signifies that the small and medium sized companies have to make strategic decision about the preference in the area of technology innovation and management performances.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.529-540
• /
• 2018

Sand dam is a flow barrier commonly built on small or medium size sandy rivers to accumulate sand and store excess water for later use or increase the water table. The effectiveness of sand dam in increasing the water table and the amount of extractable groundwater is tested using numerical models. Two models are developed to test the hypothesis. The first model is to simulate the groundwater flow in a pseudo-natural aquifer system with the hydraulically connected river. The second model, a modified version of the first model, is constructed with a sand dam, which raises the riverbed by 2 m. In both models, the effect of groundwater abstraction is tested by varying the pumping rate. As the model results show the groundwater after the construction of the sand dam has increased significantly and the amount of extractable groundwater is also increased by many folds. Most importantly, in the second model, unlike the pseudo-natural aquifer system, the groundwater abstraction does not have a significant effect on the water table.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.193-202
• /
• 2006

About 99% of microorganisms in the environment are unculturable. However, advances in molecular biology techniques allow for the analysis of living microorganisms in the environment without any cultivation. With the advent of new technologies and the optimization of previous methods, various approaches to studying the analysis of living microorganisms in the environment are expanding the field of microbiology and molecular biology. In particular, real-time PCR provides methods for detecting and quantifying microorganisms in the environment. Through the use of the methods, researchers can study the influence of environmental factors such as nutrients, oxygen status, pH, pollutants, agro-chemicals, moisture and temperature on the performances of environmental processes and some of the mechanisms involved in the responses of cells to their environment. This review will also address information gaps in the analysis of the microorganisms using real-time PCR in the environmental process and possible future research to develop an understanding of microbial activities in the environment.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.9-16
• /
• 2003

The aim of this study is to analyze the improvement of housing renewal project and suggest the conditions of rural housing environment filled with the resident's desire, requirements concerning about characteristics of a rural environment and temporal and social requirements. The project for improvement of rural housing environment has been executed in a few ways: reform of the rural housing environment and the development of territories for settlement of a desolate region. To analyze and assess the accomplishments, we considered codes and process related to the project for improvement of rural housing environment and analyzed present conditions and problems through many reference books and administrative data. According to these results, devices in future business for improvement of rural housing environment are as follows; It should required a rational allocation of working space, living space, cultural activity space suitable for rural area characteristics and changed into uniformed system in various projects governed by different institutions.