• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.577-583
• /
• 2007

To overcome certain disadvantages of past typical control techniques for toxic contaminants emitted from various industrial processes, the current study was conducted to establish a thermal catalytic system using mesh-type transition-metal platinum(Pt)/stainless steel(SS) catalyst and to evaluate catalytic thermal destruction of five chlorinated hydrocarbons[chlorobenzene(CHB), chloroform(CHF), perchloroethylene (PCE), 1,1,1-trichloroethane(TCEthane), trichloroethylene(TCE)]. In addition, this study evaluated the catalyst poison effect on the catalytic thermal destruction. Three operating parameters tested for the thermal catalyst system included the inlet concentrations, the incineration temperature, and the residence time in the catalyst system. The thermal decomposition efficiency decreased from the highest value of 100% to the lowest value of almost 0%(CHB) as the input concentration increased, depending upon the type of chlorinated compounds. The destruction efficiencies of the four target compounds, except for TCEthane, increased upto almost 100% as the reaction temperature increased, whereas the destruction efficiency for TCEthane did not significantly vary. For the target compounds except for TCEthane, the catalytic destruction efficiencies increased up to 30% to 97% as the residence time increased from 10 sec to 60 sec, but the increase of destruction efficiency for TCEthane stopped at the residence time of 30 sec, suggesting that long residence times are not always proper for thermal destruction of VOCs, when considering the destruction efficiency and operation costs of thermal catalytic system together. Conclusively, the current findings suggest that when applying the transition-metal catalyst for the better destruction of chlorinated hydrocarbons, VOC type should be considered, along with their inlet concentrations, and reaction temperature and residence time in catalytic system. Meanwhile, the addition of high methyl sulfide(1.8 ppm) caused a drop of 0 to 50% in the removal efficiencies of the target compounds, whereas the addition of low methyl sulfide (0.1 ppm), which is lower than the concentrations of sulfur compounds measured in typical industrial emissions, did not cause.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.437-453
• /
• 2006

To analyze dental hygienists and other manpower at dental care service institutions where a dental coordinator was working among about 200 dental care service institutions in Seoul, Gyeonggi Province, and Incheon as of June 2005 for contents of training for dental coordinators, opinions of qualification of dental coordinators, present and future services provided by dental coordinators, and awareness of dental coordinators and to provide basic data about future services, roles, and cultivation of dental coordinators, a survey was conducted and 216 copies returned were analyzed, obtaining the following results. 1. 83.8 percent needed an educational program for dental coordinators as an educational content; 41.7% had awareness of the educational content; and 83.8 percent insisted that over the intermediate level of curricula should be taken. Dental coordinator cultivation institutions identified included the institution under the control of the Korean Dental Hygienists Association and the education center for the department of dental hygiene; 76.9% insisted that an appropriate qualifying examination should be necessary. They suggested the central government department and the local government as a certification institution; 39.4% insisted that financial support for the education should be provided by financing education alone. Only 28.7% experienced dental coordinator education and 73.1% hoped to serve as a dental coordinator. They were found to expect a rise in payment(64.4%) and in the title(46.8%) after completion of the educational program. 2. 66.2% saw a dental hygienist as the most appropriate for a dental coordinator; clinical career (39.4%) and practical capacity(29.2%) were suggested as requirements for a dental coordinator; and a period of over three years(47.2%) was suggested for appropriate dental career. 3. Dental coordinators' present services included 'reservation management' for customer management, 'staff service training' for organization management, 'understanding of customer reception attitudes and actions' for self-management, 'hospital information management' for hospital marketing, 'acceptance' for hospital affairs management, and 'hospital environment management' for hospital facilities management; their future services included 'acquisition of ability to use a foreign language' for self-management, followed by 'staff service training' for organization management, 'training and counseling' for customer management, 'acquisition of counseling capacity' for self-management, 'complaining customer reception' for customer management, and 'marketing strategy implementation' for hospital marketing. 4. After comparing dental hygienists and other manpower in terms of dental coordinators' future services, dental hygienists showed interest in 'acquisition of ability to use a foreign language,' 'staff service training,' 'complaining customer reception,' and 'acquisition of counseling capacity' while other manpower showed interest in 'acquisition of ability to use a foreign language,' 'document data management,' 'acquisition of basic service manner,' 'acquisition of counseling capacity,' 'manpower management,' 'establishment and evaluation of a marketing strategy,' and 'education and counseling.' 5. As for awareness of dental coordinators, they were thought of as helpful in improving image of a dental clinic; it was found that continuous training should be necessary to develop dental coordinators' capacity; dental coordinators' services should be important and contribute to patients' qualitative satisfaction.

• Journal of Intelligence and Information Systems
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2012

As exhibition industry, which is a part of 17 new growth engines of the government, is related to other industries such as tourism, transportation and financial industries. So it has a significant ripple effect on other industries. Exhibition is a knowledge-intensive, eco-friendly and high value-added Industry. Over 13,000 exhibitions are held every year around the world which contributes to getting foreign currency. Exhibition industry is closely related with culture and tourism and could be utilized as local and national development strategies and improve national brand image as well. Many countries try various efforts to invigorate exhibition industry by arranging related laws and support system. In Korea, more than 200 exhibitions are being held every year, but only 2~3 exhibitions are hosted with over 400 exhibitors and except these exhibitions most exhibitions have few foreign exhibitors. The main reason of weakness of domestic trade show is that there are no agencies managing exhibitionrelated statistics and there is no specific and reliable evaluation. This might cause impossibility of providing buyer or seller with reliable data, poor growth of exhibitions in terms of quality and thus service quality of trade shows cannot be improved. Hosting a lot of visitors (Public/Buyer/Exhibitor) is very crucial to the development of domestic exhibition industry. In order to attract many visitors, service quality of exhibition and visitor's satisfaction should be enhanced. For this purpose, a variety of real-time customized services through digital media and the services for creating new customers and retaining existing customers should be provided. In addition, by providing visitors with personalized information services they could manage their time and space efficiently avoiding the complexity of exhibition space. Exhibition industry can have competitiveness and industrial foundation through building up exhibition-related statistics, creating new information and enhancing research ability. Therefore, this paper deals with customized service with visitor's smart-phone at the exhibition space and designing mobile framework which enables exhibition devices to interact with other devices. Mobile server framework is composed of three different systems; multi-server interaction, server, client, display device. By making knowledge pool of exhibition environment, the accumulated data for each visitor can be provided as personalized service. In addition, based on the reaction of visitors each of all information is utilized as customized information and so the cyclic chain structure is designed. Multiple interaction server is designed to have functions of event handling, interaction process between exhibition device and visitor's smart-phone and data management. Client is an application processed by visitor's smart-phone and could be driven on a variety of platforms. Client functions as interface representing customized service for individual visitors and event input and output for simultaneous participation. Exhibition device consists of display system to show visitors contents and information, interaction input-output system to receive event from visitors and input toward action and finally the control system to connect above two systems. The proposed mobile framework in this paper provides individual visitors with customized and active services using their information profile and advanced Knowledge. In addition, user participation service is suggested as well by using interaction connection system between server, client, and exhibition devices. Suggested mobile framework is a technology which could be applied to culture industry such as performance, show and exhibition. Thus, this builds up the foundation to improve visitor's participation in exhibition and bring about development of exhibition industry by raising visitor's interest.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.99-110
• /
• 2013

In the medical field, the necessity of education growth for the professional Radiation Technologists has been emphasized to become experts on radiation and the radiation field is important of the society. Also, in hospitals and companies, important on thesis is getting higher in order to active and cope with rapidly changing internal and external environment and a more in-depth expert training, the necessity of new teaching and learning model that can cope with changes in a more proactive has become. Thesis writing classes brought limits to the in-depth learning as to start a semester and rely on only specific programs besides, inevitable on passive participation. In addition, it does not have a variety opportunity to present, an actual opportunity that can be written and discussed does not provide much caused by instructor-led classes. As well as, it has had a direct impact on the quality of the thesis, furthermore, having the opportunity to participate in various conferences showed the limitations. In order to solve these problems, in this study, writing thesis has organized training operations as a consistent gradual deepening of learning, at the same time, the operational idea was proposed based on the connectivity integrated operating and effective training program & instructional tool for improving the ability to perform the written actual thesis. The development of teaching and learning model consisted of 4 system modeling, scaffolding, articulation, exploration. Depending on the nature of the course, consisting team following the personal interest and the topic allow for connection subject, based on this, promote research capacity through a step-by-step evaluation and feedback and, fundamentally strengthen problem-solving skills through the journal studies, help not only solving the real-time problem by taking wiki-space but also efficient use of time, increase the quality of the thesis by activating cooperation through mentoring, as a result, it was to promote a positive partnership with the academic. Support system in three stages planning subject, progress & writing, writing thesis & presentation and based on cognitive apprenticeship. The ongoing Coaching and Reflection of professor and expert was applied in order to maintain these activities smoothly. The results of this study will introduce actively, voluntarily and substantially join to learners, by doing so, culture the enhancement of creativity, originality and the ability to co-work and by enhance the expertise of based-knowledge, it is considered to be help to improve the comprehensive ability.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.143-152
• /
• 2008

In order to share the understanding agricultural multifunctionality with people, we carried out quantification and monetary evaluation for controlling flood and fostering water resources function in paddy and upland farming in Korea. The amount of water controlling flood and fostering water resources function in paddy farming was much greater than that in upland. The quantification of flood control function could be estimated by sum of the height of dike and water infiltrated during the flooding periods in paddy farming, and water excepting runoff water from precipitation at flooding time in upland farming. As results of estimation of flood control function, the amounts of water controlling flood have been evaluated as $294mm\;year^{-1}$ in paddy farming and $72.6mm\;year^{-1}$ upland farming, and was calculated 3.71 billion MT on a nation basis in 2006. When it was carried out monetary estimation as the cost of dam construction and the depreciation expense by using replacement cost method, flood control functions in paddy and upland were evaluated as 44,338.9 and 7,221.5 billion won, respectively. Comparing with previous reports, monetary value was analyzed much to increase because of rising price cost recently. Fostering water resource functions were also quantified in paddy and upland farming as the amount of water keeping and infiltrating water during the cultivation. In the basis of estimation model, it was showed that paddy and upland farming had been estimated to have $414.28mm\;year^{-1}$, $18.7mm\;year^{-1}$, respectively. They were also calculated to 4.49 and 0.137 billion MT on a nation basis in 2006, respectively. The economic values of fostering water resources function in paddy and upland farming were also estimated to 1,769.4 and 52.8 billion won, respectively, as replacing the amount of water to the cost of drinking water in 2006. There were differences by much to the amounts of controlling flood function and fostering water resource between paddy and upland farming. It means that paddy farming more play an important role in environment than upland farming in Korea.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.77-100
• /
• 2009

Information Systems (IS) is an essential tool for any organizations. The last decade has seen an increasing body of knowledge on IS usage. Yet, IS often fails because of its misuse or non-use. In general, decisions regarding the selection of a system, which involve the evaluation of many IS vendors and an enormous initial investment, are made not through the consensus of employees but through the top-down decision making by top managers. In situations where the selected system does not satisfy the needs of the employees, the forced use of the selected IS will only result in their resistance to it. Many organizations have been either integrating dispersed legacy systems such as archipelago or adopting a new ERP (Enterprise Resource Planning) system to enhance employee efficiency. This study examines user resistance prior to the adoption of the selected IS or ERP system. As such, this study identifies the importance of managing organizational resistance that may appear in the pre-adoption context of an integrated IS or ERP system, explores key factors influencing user resistance, and investigates how prior experience with other integrated IS or ERP systems may change the relationship between the affecting factors and user resistance. This study focuses on organizational members' resistance and the affecting factors in the pre-adoption context of an integrated IS or ERP system rather than in the context of an ERP adoption itself or ERP post-adoption. Based on prior literature, this study proposes a research model that considers six key variables, including perceived benefit, system complexity, fitness with existing tasks, attitude toward change, the psychological reactance trait, and perceived IT competence. They are considered as independent variables affecting user resistance toward an integrated IS or ERP system. This study also introduces the concept of prior experience (i.e., whether a user has prior experience with an integrated IS or ERP system) as a moderating variable to examine the impact of perceived benefit and attitude toward change in user resistance. As such, we propose eight hypotheses with respect to the model. For the empirical validation of the hypotheses, we developed relevant instruments for each research variable based on prior literature and surveyed 95 professional researchers and the administrative staff of the Korea Photonics Technology Institute (KOPTI). We examined the organizational characteristics of KOPTI, the reasons behind their adoption of an ERP system, process changes caused by the introduction of the system, and employees' resistance/attitude toward the system at the time of the introduction. The results of the multiple regression analysis suggest that, among the six variables, perceived benefit, complexity, attitude toward change, and the psychological reactance trait significantly influence user resistance. These results further suggest that top management should manage the psychological states of their employees in order to minimize their resistance to the forced IS, even in the new system pre-adoption context. In addition, the moderating variable-prior experience was found to change the strength of the relationship between attitude toward change and system resistance. That is, the effect of attitude toward change in user resistance was significantly stronger in those with prior experience than those with no prior experience. This result implies that those with prior experience should be identified and provided with some type of attitude training or change management programs to minimize their resistance to the adoption of a system. This study contributes to the IS field by providing practical implications for IS practitioners. This study identifies system resistance stimuli of users, focusing on the pre-adoption context in a forced ERP system environment. We have empirically validated the proposed research model by examining several significant factors affecting user resistance against the adoption of an ERP system. In particular, we find a clear and significant role of the moderating variable, prior ERP usage experience, in the relationship between the affecting factors and user resistance. The results of the study suggest the importance of appropriately managing the factors that affect user resistance in organizations that plan to introduce a new ERP system or integrate legacy systems. Moreover, this study offers to practitioners several specific strategies (in particular, the categorization of users by their prior usage experience) for alleviating the resistant behaviors of users in the process of the ERP adoption before a system becomes available to them. Despite the valuable contributions of this study, there are also some limitations which will be discussed in this paper to make the study more complete and consistent.

• Korean Journal of Ecology and Environment
• /
• v.40 no.3
• /
• pp.403-411
• /
• 2007

The purpose of the study was to evaluate fish community, based on conventional at Shannon-Weaver diversity index (H'), and ecological health, based on the Index of Biological Integrity (IBI) using fish assemblage in the eight sites of Nakdong River during June${\sim}$August 1999. Total number of species sampled was 19 species, and two sensitive species of Zacco temminckii (51%) and Rhynchocypris oxycephalus (28%) dominated the fish community. Also, trophic guild analyses showed that insectivore was 87% of the total and omnivore was rare, indicating that the ecological health is well maintained in the system. The pattern of spatial variation in the diversity index(H') was very similar to patterns of the species number and individual number, whereas the pattern of H' was not matched with the tolerance and trophic guild data. The diversity index (H') showed highest (1.56) in Site 6 where the proportion of sensitive species and tolerant species was minimum and maximum, respectively, and where the insectivore and omnivore were minimum and maximum. In other words, the diversity index was not matched at all with the trophic and tolerant guilds, indicating that the conventional index did not reflect the ecological characteristics of fish community in the system. In the mean time, the ecological health (IBI) averaged 33.5 (n=8), indicating "good${\sim}$fair condition" and the IBI values matched with trophic and tolerance guilds. Maximum IBI occurred in Site 2 where the sensitive and msectivore species were nearly maximum, and the tolerant and omnivore species were almost minima, indicating that IBI values were closely associated with the ecological functions and health conditions. Overall data suggest that the conventional diversity index may not effective for a evaluation of fish community, and that in contrast the IBI approach may be a useful tool for diagnosis of stream community.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.435-442
• /
• 2010

The study analyzed the effects of salt concentration [high salt (HS) and low salt (LS)] and sodium nitrite ($NaNO_2$), which are typically utilized in Korean processing facilities, on fatty acid composition, free amino acids, microbial counts and sensory characteristics of processed dry-cured ham. Four different treatments were considered: three hams (11.30 kg) salted with 92 g/kg salt (w/w) (HS), three hams (10.65 kg) treated with HS and 100 ppm $NaNO_2$ (HS+$NaNO_2$), three hams (11.42 kg) salted with 62 g/kg salt (w/w) (LS), and three hams (10.62 kg) treated with LS and 100 ppm $NaNO_2$ (LS+$NaNO_2$). Fatty acid composition analysis revealed significantly (p<0.05) higher saturated fatty acid and lower (p<0.05) unsaturated fatty acid in the HS+$NaNO_2$ group compared with the other groups. Glutamate, alanine and lysine free amino acids were higher than the other free amino acids. The processing conditions did not significantly affect the free amino acids of biceps femoris muscles, except for the proline content (p>0.05). In sensory evaluation, the fermentation aroma of the LS group was higher than that of the HS group. The aerobic counts consistently ranged from from $2.3{\times}10^2$ to $1.11{\times}10^4$ CFU/g. Escherichia coli including strain O157:H7, Staphylococcus aureus, and Salmonella spp. were not detected.

• The KIPS Transactions:PartB
• /
• v.13B no.5 s.108
• /
• pp.561-568
• /
• 2006

WPS(Wearable Personal Station) for next generation PC can define as a core terminal of 'Ubiquitous Computing' that include information processing and network function and overcome spatial limitation in acquisition of new information. As a way to acquire significant dynamic gesture data of user from haptic devices, traditional gesture recognizer based on desktop-PC using wire communication module has several restrictions such as conditionality on space, complexity between transmission mediums(cable elements), limitation of motion and incommodiousness on use. Accordingly, in this paper, in order to overcome these problems, we implement hand gesture recognition system using fuzzy algorithm and neural network for Post PC(the embedded-ubiquitous environment using blue-tooth module and WPS). Also, we propose most efficient and reasonable hand gesture recognition interface for Post PC through evaluation and analysis of performance about each gesture recognition system. The proposed gesture recognition system consists of three modules: 1) gesture input module that processes motion of dynamic hand to input data 2) Relational Database Management System(hereafter, RDBMS) module to segment significant gestures from input data and 3) 2 each different recognition modulo: fuzzy max-min and neural network recognition module to recognize significant gesture of continuous / dynamic gestures. Experimental result shows the average recognition rate of 98.8% in fuzzy min-nin module and 96.7% in neural network recognition module about significantly dynamic gestures.