• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.802-809
• /
• 2014

This paper presents a dual-mode bias modulator (BM) for complementary metal oxide semiconductor (CMOS) power amplifiers (PAs). The BM includes a hybrid buck converter and a normal buck converter for an envelope tracking (ET) mode for high output power and for an average power tracking (APT) mode for low output power, respectively. The dual-mode BM and CMOS PA are designed using a $0.18-{\mu}m$ CMOS process for the 1.75 GHz band. For the 16-QAM LTE signal with a peak-to-average power ratio of 7.3 dB and a bandwidth of 5 MHz, the PA with the ET mode exhibited a poweradded efficiency (PAE) of 39.2%, an EVM of 4.8%, a gain of 19.0 dB, and an adjacent channel leakage power ratio of -30 dBc at an average output power of 22 dBm, while the stand-alone PA has a PAE of 8% lower at the same condition. The PA with APT mode has a PAE of 21.3%, which is an improvement of 13.4% from that of the stand-alone PA at an output power of 13 dBm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.4
• /
• pp.364-375
• /
• 2014

Parametric array transducers are used for long-range and highly directional communication in an underwater environments. The power amplifiers for parametric array transducers should have sufficient linear output characteristic and high efficiency to avoid communication errors, system heating, and fuel problems. But the conventional power amplifier with fixed source voltage is very low efficient due to large power loss by the big difference between the fixed source voltage and the amplifier output voltage. Thus to solve the problems this paper proposes the high efficiency power amplifier for parametric array transducers. The proposed power amplifier ensures high linearity of output characteristic by utilizing the push-pull class B type amplifier and furthermore gets high efficiency by applying the envelope tracking technique that variable source voltage tracks the envelope of the amplified signal. Also the paper suggests the detailed circuit topology and design guideline of class B push-pull type amplifier and variable output voltage AC/DC converter. Its characteristics are verified by the detailed simulation and experimental results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.413-422
• /
• 2022

In this paper, the fault analysis of the momentum wheel, which is a high-speed rotary machinery of 'Control Moment Gyro' for medium and large satellite, was described. For fault diagnosis, envelope spectrum analysis was performed using Hilbert transformation method and signal demodulation method to find the impact signals periodically generated from amplitude modulated signals. Through this, the fault of the momentum wheel was diagnosed by analyzing whether there was a harmonic component of the rotational frequency and a bearing fault frequency in a specific frequency band with a high peak.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.851-856
• /
• 2010

This paper presents an efficiency enhancement for the balanced power amplifier using DBS(Dynamic Bias Switching) method which dynamically provides the power amplifier with two bias voltage levels according to the input envelope signal. In order to apply the dynamic biases to each side of the balanced power amplifier, two switching stages are adopted. Using an OFDM signal with a bandwidth of 20 MHz and a PAR(Peak to Average Ratio) of 8.5 dB, 6 % of PAE(Power-Added Efficiency) is improved at an output power of 42.5 dBm.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.32-36
• /
• 2012

In this paper, we present a novel algorithm for detecting a bonded channel in a cognitive radio network where channel bonding is allowed for a higher data rate. The envelope detection algorithm is proposed to distinguish the center frequency of the received signal in order to determine whether the signal is transmitted by a primary user occupying a single channel or a secondary user occupying more than two channels when the channel is in use.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.39-42
• /
• 1999

Adaptive array is using the array of antenna elements spatially and its output is the sum of each antenna elements output signal which is multiplied by the controlled weight coefficients corresponding to each elements. In this paper, for the BPSK and BFSK signals with S/I=2, S/N=10 is applied to the linear array antenna using the LMS & the Kalman filter algorithm. For the 4 elements equidistance linear array antenna system LMS and Kalman filter algorithm was used as the adaptive instruction principles and the application results to the constant amplitude envelope signals such as BPSK or BFSK can be seen that the computer simulation results are very fast in the convergence characteristics of directional patterns and the signal following characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.199-203
• /
• 2002

Adaptive array is using the array of antenna elements spatially and its output is the sum of each antenna elements output signal which is multiplied by the controlled weight coefficients corresponding to each elements For the 4 elements equidistance linear array antenna system LMS and RLS algorithm was used as the adaptive instruction principles and the application results to the constant amplitude envelope signals such as BPSK can be seen that the computer simulation results are very fast in the convergence characteristics of directional patterns and the signal following characteristics.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.80-87
• /
• 1994

Fetal monitoring is a routine procedure to obtain a record of physiologic functions during pregnancy and labor. It is required to determine fetal heart frequency accurately. There are various types of fetal heart rate(FHR) determination and the most frequently applied method is transabdominal Doppler ultrasound. However, in the case of weak or noise corrupted Doppler ultrasound signals, conventional peak detections and the autocorrelation function method have many difficulties to determine FHR precisely. Also the autocorrelation function is effected by threshold level and window size. To solve these problems, the high resolution pitch determination algorinthm is introduced to detect FHR from Doppler ultrasound signals. This scheme digitally processes Doppler ultrasound signal for digital rectification, envelope detection, decimation and correlation calculation of two interconnected segments and then FHR is determined by its maximal value. Even in the case of a greatly smeared noise signal, this algorithm is able to search FHR more accurately than autocorrelation function by means of compensating FHR with a constant correlation threshold. This algorithm is simulated by 386-MATLAB on PC 486/DX and verified that it is superior to the autocorrelation function method.

• Proceedings of the KOSOMBE Conference
• /
• v.1991 no.11
• /
• pp.79-82
• /
• 1991

Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3145-3147
• /
• 2000

A passive RFID system consists of reader and tag. Reader is required the filter to modulate the data from backscattering signal which is transmitted by tag. The filter in the reader consists of envelope detector, amplifier, filter, and pulse shaping circuit, In this paper, design and analysis of filter in the RFID system which is operated at l3.56MHz carrier and 70KHz backscattering signal frequency is presented and is confirmed by simulation using Pspice.