• Journal of Engineering Education Research
• /
• v.14 no.6
• /
• pp.31-40
• /
• 2011

This paper explores and proposes the evaluation criteria of design projects in the entry-level design course. In the entry-level engineering design course the students proceeds various design projects to understand the concept of engineering design process and to develop the creativity. The evaluation criteria of design projects is very important component because the outcome of students in the engineering design course are effected from the evaluation criteria that enforces the students to focus on doing their task. According to this case study the evaluation criteria can be good solution to evaluate the design projects. By the outcome standard of ABEEK on the entry-level engineering design course the evaluation criteria was selected with the results of design projects such as design plan, report, handicrafts, objectives.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.27-34
• /
• 2009

This paper analyze technical review entry criteria and review process based on system property, and review checklist to conform technical review is also showed. The execution of review is determined according to the preparation of review item and identification for risk element. Risk level should be mitigated before technical review by appropriate plan. This paper described the entering condition of technical review for developmental phase, and tailoring consideration for technical review condition. Described technical review entry criteria, review process, and tailoring consideration is applied to development of test equipment for ground ant-air missile system. Applied system specific technical review process, tailored entry condition for test equipment for ground ant-air missile system and review check list is showed and the effectiveness of described system specific technical review process is presented.

• Journal of the Korean Society for Library and Information Science
• /
• v.21
• /
• pp.61-101
• /
• 1991

This study reviews the development and change of main entry principle in German cataloging codes, with special emphasis on RAK. With rerard to the functions of catalog, comparison between the traditional title main entry in the Orient and author main entry in the West has been made. The analysis confirms in this study that various criteria in choice of the entries in RAK have been adopted. In case of works where the persons who have played different roles in the works are named on the title page, as well as related works and works of mixed responsibility, the criteria of entry determination are complex and time consuming process and have no absolute value. And there are also various kinds of problems in corporate entries including confirmation of originator(Urheber), choice of either the territorial authority corncerned or corporate bodies as an entry depending on the nature of the publications, and a unique bibliographical situation of treaties. This means the code is absence of absolute value in selecting entries, and this results in adoption of main entry principle which has lost its significance for the purpose of cataloging. With emergence of the ISBD and actualization of automated cataloging, morever, all entries are equal as points of access. It would eliminate the need for personal judgements required in choice of main entry by the present code. In doing so, it would bring uniformity and standardization to cataloging practice. In direct approach to works, title entry is more developed finding device than author entry in cataloging theories. Thus introduction of unit card system beginning with title which is adopted in KCR3 would be desirable, the complicated rules for the choice of entry could be abandoned from cataloging codes. Most of the user studies show that catalog users have placed higher value on the title entry as a finding device and each entry is equal as access points through unit entry. This means that choice of a given entry as a main entry is unnecessary in cataloging codes. Title entry would be a rather simple standard and direct approach for works. This study proves that the traditional title entry of Korea is superior to author main entry in the Western world in cataloging theory. Thus recommendation to be made is that abandonment of author main entry from cataloging codes should be considered in the future.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• Journal of the Korean Society of Systems Engineering
• /
• v.19 no.1
• /
• pp.79-90
• /
• 2023

In principle, R&D of general weapons systems are led by companies or government-funded organizations. In terms of project execution, the defense R&D planning system was reorganized to conduct SE-based project management by integrating the naval ship project execution procedure into the general weapon system R&D procedure. The development progress was confirmed according to the guide for SE application of DAPA, and a technical review meeting was proposed to enter into the each next phase in the R&D process. This paper focuses on improvement for technical review in terms of technical management based on system engineering for R&D mounted weapon systems and the naval surface ship project in preliminary design and detailed design. So, the improvement direction for reviewing the entry criteria for the R&D weapons systems of the naval ship and mounted weapons is proposed.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.173-182
• /
• 2012

Entry and exits of the rest area are sections where designed speed can be rapidly change and also a weak traffic safety section. In addition, two tasks can be performed simultaneously at entry of the rest area, particularly searching for deceleration and parking spaces/parking sides etc. Thus, design criteria is required in order to procure the stability of accessed vehicle. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. In this study, Derive problems in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. After Classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the minimum length of the entrance connector road is decided as 40m using Slowing-down length formula and based on the driving pattern, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$. Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• Journal of Information Technology Services
• /
• v.17 no.2
• /
• pp.101-110
• /
• 2018

Analytic Hierarchy Process (AHP) is a systematic and objective decision method that stratifies multiple criteria to determine various evaluation factors' order of priority. Since AHP requires several stages of analysis with complicated attributes, they normally rely on computer programs for the execution of such analyses. However, the existing AHP analytic tools carry the inconvenience of having to repeatedly input massive amounts data generated in every stage. This repetitious data entry process results in prolonged analysis times and higher possibility of errors, leading to decreased reliability of the results. Thus, in this study, we develop an analytic tool that effectively simplifies the data entry process in AHP analysis, for the purpose of reducing analysis times and increasing the reliability of the results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.397-407
• /
• 2017

This study investigated current status of rest area for drowsy drivers on the highways and drew the related issues to define specifications and design criteria regarding expressway rest area for drowsy drivers on the highways. Based on the investigation result, geometric structure specifications and improvement plans are suggested. The entry part of a rest area for drowsy drivers on the highways was divided into deceleration transition section, deceleration lane and entry connection road while the exit part was divided into exit connection road, acceleration lane and acceleration transition section. The optimum length was estimated by considering the main lane vehicle traveling speed, traveling speed at the beginning/end point of entry/exit connection roads, deceleration and acceleration. In addition, reasonable design criteria were suggested by dividing the parking section of rest area for drowsy drivers according to parking style and cross-section composition, and length of parking space and then considering the ratio of vehicles using rest area for drowsy drivers, the ratio of heavy vehicles, and the design speed within a rest area for drowsy drivers. It is believed that the suggested design criteria on rest area for drowsy drivers on the highways can be utilized in the future planning and maintenance of rest area for drowsy drivers. Additionally, the defined criteria on installing rest area for drowsy drivers on the highways will prevent traffic accidents in resting facilities and highways as well as improve usage and safety of them.

• Korean Medical Education Review
• /
• v.18 no.2
• /
• pp.90-98
• /
• 2016

Assessment tools for non-academic qualities such as ethics frequently employ hypothetical scenarios to lay out a contextual framework underlying the corresponding criteria of assessment. Due to the context-specific nature of the assessment criteria, details of the scenarios become very important in obtaining accurate results. This study aims to explore how medical school applicants differ in ethical decision making depending on the types of ethical dilemma scenarios, and how they correlate with academic achievements after admission. In 2014, all 82 applicants invited for an admission interview for a graduate-entry program were asked to complete a questionnaire comprised of 13 hypothetical scenarios. There were three domains (unethical business decisions, unethical academic decisions, and sexual quid pro quos) and participants were made to choose between the profitable-but-unethical choice or the unprofitable-but-ethical choice, using a four-point Likert-type scale. On average, tendencies toward unethical decisions were lowest for sexual favors ($1.34{\pm}0.46$), and highest for gaining academic advantages ($2.22{\pm}0.56$). Unethical decisions for academic advantages and sexual benefits showed significant correlation respectively with the female gender and those who graduated from overseas universities. In addition, the propensity for choosing unethical academic decisions was significantly correlated with high academic achievements in medical school (r=0.396). Not only does this study demonstrate that different levels of ethical decision making depend on the scenarios, but also those differences may be a determinant factor in subsequent academic performances in medical school. In conclusion, given the possible influence of the details of the hypothetical scenarios to the applicant's responses, careful consideration must be given during their development.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.7-16
• /
• 2009

Korea Highway Capacity Manual (2001) proposes only LOS(Level of Service) analysis method on non-control and two-way-stop intersections, not dealing with the analysis method on LOS for roundabouts, nor even including the term 'roundabout'. This study selects proper MOEs for roundabouts and criteria the LOS through simulation analysis. To attain this goal, the authors reviewed the methods to select proper MOEs in the first step, criteria the Los. For this study, the MOEs were chosen from existing literature, and used for the criteria. The MOEs to be applied to roundabouts in this research were entry traffic volume, v/c (volume/capacity) ratio, and average vehicle delays. The results showed that the maximum entry traffic volume(LOS F) at local one-lane roundabout was analyzed to be 1,700pcph and average vehicle delay 18 seconds LOS A was analyzed as 700pcph and average vehicle delay 3 seconds and v/c 0.41 in this case Maximum entry traffic volume(LOS F) at local area 2 lane roundabouts was analyzed as 2,900pcph and their average vehicle delay as 31 seconds LOS A was analyzed to be 1.500pcph and average vehicle delay 8 seconds, v/c 0.52.