• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.1
• /
• pp.9-16
• /
• 2016

This study was conducted to analyze fishing capacity and bycatch by mesh size and entrance size of spring net pot conducted by water tank and field experiment. The water tank experiments were conducted by using traps with mesh size of 22 mm and entrance size of 120 mm and 140 mm, respectively in the water tank of NIFS. The field experiment was conducted using 5 kinds of spring net pot with mesh sizes of 20 mm, 22 mm, 35 mm and entrance size of 120 mm, 130 mm, 140 mm, 360 mm by coastal trap fishery vessel operating around the area of Geoje island. In the result of water tank experiments, the catch of conger eel was 1.5 times higher when using trap with entrance size of 140 mm than that of 120 mm. In the field experiment, when using same mesh size, the larger the entrance size, the higher amount of conger eel catch, bycatch and number of bycatch species. When using the same entrance size, the larger the mesh size, the lower amount of conger eel catch and number of bycatch species, whereas the amount of bycatch showed increasing trend.

• Korean Journal of Human Ecology
• /
• v.3 no.2
• /
• pp.39-46
• /
• 2000

This research was to identify housing identity expressed on entrance features In Korean single detached houses. The data were collected from field study and content analysis method of 45 houses in Chonju city. The methods of observation, of measuring the size, of sketching. and of Photos of entrance feature in the single detached houses were used for this study. Results of this study were as follows. First. the height and the form both of main gate and of wall tended to be closed. In particular. the size of main gate tended to be shown off rather than having practical funtion. whereas the form of main gate were semi-opened and thus could not guaranteed privacy of the residents very well. Second, 53.3% of the direction of main entrance were found to be at right-an91e0 with main gate, which reflected the control needs of private life. Third. the balance of main gate and exterior was homogeneous, which expressed the increase of aethetic concern of exterior Finally. most of entrance approach were made of stones and bricks. This result indicated that the practical funtion of entrance approach was emphasized the emotional environment was not considered in building the entrance approach.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2010

Recently, Fishermen have required to expand the circumference of trap entrance for conger eel because it was difficult to take the catch out as well as to put the baits into. A series of fishing experiments was carried out in coastal areas of Tongyoung, Korea in 2008 and 2009 using the traps to describe the effect of the entrance size on the catch. The experimental traps (five types) were used in filed experiments with four types circumference size traps (140, 180, 220 and 260mm) with mesh size 22mm and another type was used the same one usually using in filed with mesh size 35mm (750mm circumference). The experiment results were, the conger eels of total length 35mm more or so were caught 85, 93, 142 and 176 individual by the experiment traps with mesh size 22mm as increase circumference size from 140mm to 260mm, respectively. And the small conger eels of the total length below 35mm to be prohibited to catch by law were caught 145, 160, 288 and 304 individual according to increase the circumference size of trap, respectively. In addition, in case of the trap with mesh size 22mm, bycatches were 230 - 260 individuals and much more than bycatches of the trap with mesh size 35mm. In conclusion, when we expand the circumference size of trap according to fishermen's requirement, we should review not only economic of fishery but also increasement the bycatch of non-target fishes and small size fishes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.970-972
• /
• 2011

The vacuum chamber pressure was investigated according to the second throat exhaust diffuser entrance diameter. The sizes of diffuser entrance were changed three cases, and each case was computed by using CFD. Also in order to relatively compare the vacuum chamber pressure the Euler equation was adopted. According to the results, as the size of diffuser entrance was increased it was observed that the vacuum chamber pressure was decreased.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.52-55
• /
• 2005

The purpose of this study is to analyze space size in the apartment unit plan towards optimal space configuration in order to offer the helpful information to housing designers. For this, we analyzed 432 samples using the Excel 2003 program. The major results of this study are as follows. 1) as the unit size gets bigger, the proportion of the usable area is increased. 2) as the unit size gets bigger, the number of spaces is increased and spaces are divided although they have the same function. 3) living room has the highest proportion in each unit, master room and kitchen are followed. 4) the proportion of living room, kitchen and entrance hall is not fluctuated while that of bedroom and bathroom is decreased. 5) there is a big gap between maximum size and minimum size of kitchen, entrance hall, bathroom and dressing room.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.50-59
• /
• 1997

When a front head of train enters a tunnel at a high speed, compression wave is generated at tunnel entrance due to the confinement effect and propagated along the tunnel with sound of speed. The propagated compression wave is reflected at tunnel exit due to abrupt pressure change at passage. The reflected wave is expansion pressure wave. And when the rear head of train goes through the tunnel entrance, another expansion pressure wave is generated and propagated along the tunnel. The pressure drop occurs seriously around train when the two expansion pressure waves come cross on train in the tunnel. In order to reduce the pressure drop, the compression wave front must be controlled because the intensity and magnitude of pressure drop is nearly proportional to that of compression wave at tunnel entrance. This study relates to reduction of the pressure wave gradient with respect to tunnel entrance shape change with various kind of angle and rounding. The results show characteristics of wave propagation in tunnel, usefulness of characteristic curve to estimate proper time domain size in numerical study and measuring time in actual experiment. Also rounding is contributed to improve pressure wave front even if its radius is very small at tunnel entrance. In order to improve of pressure wave front at tunnel entrance, proper angle is prefered to rounding with big radius and an angle of around 14$^{\circ}$ is recommended according to this simulations, And it is expected to reduce additional pressure drop in tunnel when the location and the size of the internal space for attendant equipment are considered in advance.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2011

The purpose of this study is to clarify the transitional process of spatial configuration of 'Topdong Yangdalmal'; One of the existing 22 old settlements in cheongju city. The results are as follows. 1) Side roads are derived from Inner road until 1970, so large-scale lots are subdivided small-scale lots. The houses are mostly in 1970s and 1980s. The existing old houses are 11, their orientation are East South, and the entrance gives on side road. The orientation, court yard, and entrance of the houses nearby side roads keep ongoing, in spite of alteration and extension. Especially, Entrance is changed by the new arterial roads and subdivided lots, but, the houses nearby side roads are continued as in the past. 2) The newly built houses in 1970's are 20, and it's arrangements are equal to existing old one. The orientation of houses after 1980's is the same in 1970's. But, the entrance is changed by subdivided lots, and the size of the court yard are reduced or disappeared. In other hand, the houses as the same size of the existing houses, and Storyincrease continue court yard as in the past. Therefore, the houses which are nearby inner road, and increase story, are continued, in spite of the newly built one.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.877-886
• /
• 2019

The size of the subway entrance should be calculated according to the user's demand, but Korea has the same size for each entrance by applying a uniform value. Recently, the installation of mobile convenience facilities such as escalators, elevators, etc. is mandated by the traffic weakness promotion law, but it is inconvenient to use the existing stations because it is mainly arranged in the place where it can be installed regardless of user demand. This study aims to establish a model for estimating the size of mobile convenience facilities by predicting the use demand of each station entrance so that the location and size of mobile facilities can be reflected in the design or construction of the station. To this end, a multiple regression model was established to forecast daily demand by utilizing the demand for getting on and off by station and the building association area for each purpose around the railway station. The actual data of Dongdaemun and Jonggak Stations were used to verify the estimated model. In addition, the escalator installation scale was compared / analyzed by doorway using domestic and overseas escalator equations. As a result, it was more accurate to estimate the usage demand for a single station. Also, Jonggak Station has an up and down escalator installed at exit 1, but it was analyzed that it is appropriate to install at exit 4. This study is an advanced form of the essay model for estimating the users of the entrance and exit users of urban railway stations published in 2018. In addition, it seems to be the basis of the current escalator installation criteria.

• The Journal of the Korea Contents Association
• /
• v.12 no.6
• /
• pp.346-352
• /
• 2012

Radiation dose estimation on the newborn and infants during radiation examinations, unlike for the adults, is not actively being progressed. Therefore, as an index to present exposure dose during radiation examinations on newborn and infants, entrance skin dose was measured, and the result was compared with results of monte carlo simulation to raise reproducibility of entrance skin dose measurement, and it was proved that various geometry implementation was possible. The resulting values through monte carlo simulation was estimated using normalization factors for entrance skin dose to calibrate radiation dose and then normalized to a unit X ray radiation field size. Average entrance skin dose per one time exposure was $78.41{\mu}Gy$ and the percentage error between measurement by dosimeter and by monte carlo simulation was found to be -4.77%. Entrance skin dose assessment by monte carlo simulation provides possible alternative method in difficult entrance skin dose estimation for the newborn and infants who visit hospital for actual diagnosis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.204-213
• /
• 2010

Test fishing was carried out using six kinds of different mesh sizes (20, 22, 24, 28, 35, 40mm) for springnet-pot to study bycatches according to the mesh size and catches survey was done for another one (mesh size : 22mm, entrance round : 350mm) in Geo-je & Tong-young waters of Korea. On the first sea experiment, it was thought that suitable mesh size of spring-net-pot catching conger-eel over 35cm with decreasing the catches of conger-eel (Conger myriaster) below 35cm was 24mm. On the second sea experiment, commercial catches were crabs (Charybdis bimaculata), octopus minor (Octopus variabilis) and others including conger-eel, and catches proportion was 60% of total catches weights. There was no big difference for the monthly catches. Self-consumption catches were 9 species including conger-eel below 35cm holding 50% of catches in the side of weights. There were 40% of bycatches for the catches weights and 63% for catches numbers in the 22mm mesh size of spring-net-pot having entrance round over 140mm. It showed that 50% of catches weights were discarded.