• Journal of The Korea Institute of Healthcare Architecture
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2004

This study attempts to provide the fundamental materials for space program in terms of planning a senior welfare center by means of examining and analyzing the present conditions of spatial arrangement of each section in senior welfare center for the aged. The results of the study are as in the following. 1) The demand for new service programs corresponding to the improved quality of the elderly and various social desires is relatively on the increase. Each program in senior welfare center for the elderly should be connected in an organic manner and the organization of space should be provided. 2) The section of counseling, the first step when using a welfare center, should be located in the entrance of the building and it has to be closely connected with other section. 3) The section of medical rehabilitation is a place mostly for the elderly in their frail physical condition; therefore, it is effective to use horizontal line. 4) It is important for the room for volunteers in the section for domiciliary welfare to be arranged flexibly with the office or the room for social education, and it is necessary to consider how easy daytime or short-term care is accessible. 5) The space where dynamic programs are progressed in the section of social education should be distinguished from the section of medical rehabilitation or the room for daytime care and the room for short-term care of the section of domiciliary welfare.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.5
• /
• pp.401-408
• /
• 2012

Volumetric mass transfer coefficient was measured with carbon dioxide and deionized water for the gas-liquid cocurrent slug flow in 2, 5 and 8 mm tubes. Measurement was repeated with and without a vertical section in an experimental setup and entrance effect was found greater for smaller tubes. Volumetric mass transfer coefficient in the vertical section was found generally a strong function of gas- and liquid-phase superficial velocities. 5 mm- and 8 mm-tube data are highly consistent each other but not with 2 mm tube.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.277-280
• /
• 2003

It was investigated that the "ㄱ" type angle product could be bended with a curvature during extrusion by extru-bending process. The bending process for the "ㄱ" type angle product can be developed by the hot metal extru-bending machine with the two punches moving in the different velocity. Because of non-symmetry of product, it is important to design the ruled surface contour of dies cavity for the welding and bending with two billets. So it is designed that the multi-hole container has two non-symmetric holes and non-symmetric contour of dies entrance. The results of the experiment show that "ㄱ" type angle product can be bended by the extrusion process and that the curvature of the product can be controlled by the velocity of punch and that the defects such as the distortion of section and the thickness change of the product and the folding and wrinkling of the product did not happen after the bending processing by the extrusion bending machine.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.136-139
• /
• 1997

Applications of commercial software DEFORM-3DTM for 3-D simulation in extrusion process are developed for the analysis of twisting of extruded products. Because the elliptical shape has at least one line symmetry, the twisting is not occured during the extrusion. But, the results of extrusion simulation of the elliptical shape show that the twisted boundary of the die surface makes the material inside die surface rotate with the constant angular velocity. Otherwise, the simulation results of the S shaped product show that the twisting can be occured by the only 180$^{\circ}$rotation symmetry of S shape without no line symmetry and show that the angular velocity increases by the only 180$^{\circ}$rotation symmetry without no twisted die surface between on the die entrance section and on the die exit section. The results of the analysis show that the angular velocity of the extruded product changes with die length and friction condition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.111-114
• /
• 1999

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted die surface connecting the die entrance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the taisting of die surface and the shear work is calculated by the consumption of shear energy The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.12
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• Journal of Korean language education
• /
• v.25 no.1
• /
• pp.169-201
• /
• 2014

The purpose of this research is to analyze the problems of the way of the 32th TOPIK(advanced)'s management for the disabled examinee and to prescribe the management of the TOPIK for them. Since the TOPIK started in 1997, the number of examinee who take it as a qualifying exam for the university entrance have gradually increased. The first disabled examinee who wants to use the result of the TOPIK for entrance into the post graduated university took the 32th TOPIK(advanced level). However, there was no examination regulations and detailed management method for the disabled. The biggest problem was the examinee could not have braille test and answer. The exam supervisor read all that is printed on the test sheet. It caused two big problems. 1) The essay question in writing test became an oral test. 2) The strategies of answering to multiple choice questions could not be used in vocabulary/grammar, writing, listening, and specially reading section. The first problem is occurred because writing and speaking have different cognitive process. The second one can be strongly related to the result in reading section. Above all, these disrupt accurate assessment of the examinee's writing and reading achievement. Therefore, this research insists the TOPIK needs to have the regulation and prescribe the management for the disabled. This research suggests 5 regulations for the blind examinee which covers the test time, supervisor, place and request of the examinee. These refer to the regulation for the disable in the other tests, such as the college scholarship ability test, TOEFL, TEPS, and a civil service exam.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.444-451
• /
• 2005

A new extrusion process of the circular section product with helical fins could be developed by rotating extrusion die. The twisting of extruded product is caused by the twisted conical die surface connecting the die entrance section and the die exit section linearly. But, until now, because the process has used fixed extrusion die, it needs high pressure in order to twist billet and form fin shape on the surface of billet. So, during extruding billet, in order not to twist billet, the extrusion die is needed to rotate itself instead of twisting of billet. It is known that it is possible to reduce extrusion load of product with helical fins by analysis and experiments using rotating die. And it is known that, through the extrusion load analysis by $DEFORM^{TM}-3D$ software, optimal rotational velocity of rotating die can be obtained according to reduction ratio of area and twisted angle of die. And experiments and analysis using rotating extrusion die show that the twisted angle of product can be controlled by twisted angle of extrusion helical die and the rotational velocity of extrusion helical die.

• Journal for History of Mathematics
• /
• v.22 no.1
• /
• pp.111-124
• /
• 2009

In this paper we check over some problems in College Scholastic Ability Test(CSAT) Mathematics section and propose some methods to improve the CSAT Mathematics section. CSAT has been changed several times with the change of the school curriculum. A Mathematics amended curriculum will apply in 2009 and we have to reorganize the system of CSAT. We investigate the changes in school curriculum and system of CSAT. Also we make a comparative study of the range of possible questions of CSAT with those of SAT and foreign national entrance exam for college.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.927-936
• /
• 2002

An experimental study has been conducted to investigate the heat/mass transfer characteristics within a film cooling hole of square cross-section for various blowing ratios and Reynolds numbers. The experiments have been performed using a naphthalene sublimation method and the flow field has been analyzed by numerical calculation using a commercial code. A duct flow enters into a film cooling hole in a cross-direction. For the film cooling hole with square cross-section, it is observed that the reattachment of separated flow and the vortices within the hole enhance considerably the heat/mass transfer around the hole entrance region. The heat/mass transfer on the leading edge side of hole exit region increases as the blowing ratios decrease because the main flow induces a secondary vortex. Heat/mass transfer patterns within the square film cooling hole are changed little with the various Reynolds numbers.