• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.136-142
• /
• 1995

The kinematically admissible velocity field is developed for the analysis of extruded products. The curving of product in extrusion is caused by the linearly distributed longitudinal velocity on the cross-section of the workpiece at the die exit. In the analysis, the longitudinal velocity in extrusion direction is divided into the uniform velocity and the deviated velocity. In order to satify the requirement of the kinematically admissible velocity field, the average value of the deviated velocity should be zero. At the same time, it should Iinearly change with the destance from the center of gravity of the cross-section of the workpiece. The results of the analysis show that the curvature of product incresses with increses in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-sectio at the die exit.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.45-48
• /
• 1997

The kinematically admissible velocity field is developed for the eccentric extrusion of circular shaped products. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The results of the eccentric extrusion by upper bound analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of workpiece at dies entrance from that of the corss-section at the dies exit end. By the DEFORMTM-3D analysis, the curving of circular shaped product in extrusion is changed by the eccentricity, die land length and the die length. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.49-52
• /
• 1997

The kinematically admissible velocity field is developed for the analysis of the curving of an eccentric extrusion. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The result of the analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of the workpiece at the die entrance from that of the cross-section at the die exit. It also increase with the die land dimension. By the DEFORMTM-3D analysis, the curving of T-shaped product in extrusion is changed by the eccentricity, die land length and the friction constant. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.176-183
• /
• 2021

The purpose of this study is was to analyze customer experience attribute of professional baseball. To achieve objectives of this study, a method was used the in-depth interview and experts' consultation which understanding the attributes and structure of customer experience attribute of professional baseball. As a result, the professional baseball customer experience attributes are 'viewing plan & purchase', 'stadium movement', 'entrance stadium', 'move to seat', 'game viewing', 'amenities/services', 'events/cheering', 'move after match'. The review of the experience section and attributes derived through in-depth interviews with professional baseball fans was verified through an expert' consultation to secure content validity. Through this process, 8 experience section and 41 attributes were analyzed. The customer experience journey was analyzed for a more in-depth analysis of the viewing experience of professional baseball fans. The customer experience journey was presented based on the needs of fans and discomfort in each experience section activity.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.912-917
• /
• 2009

An experimental flow visualization study of the entrance section of channels formed with wavy plates was made. The experiments were conducted in a water channel and a laser illuminated particle tracking was used as the technique of flow visualization. The flow region that were found in the experiments are steady, unsteady and significantly-mixed flows. Instabilities of the flow first appear near the exit of the channel. As the Reynolds number increases, the flows are characterized by the appearance of flow separation and the growth of recirculation region.

• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.409-415
• /
• 2022

국내 연결로 가속차로 길이는 13 PS/ton 마력의 화물차를 기준으로 산정되어 연결로를 주행하는 대부분의 차량 성능에 비해 과다하게 산출되어있다. 이로 인해, 대부분의 운전자들은 고속도로로 진입하기 위해 가속차로 전 구간에서 본선으로의 무분별한 진입 경향으로 본선 교통흐름에 영향을 미쳐 이에 대한 개선이 필요하다. 양지, 수석, 용인, 오산 각각IC의 연결로 유입부에서 차량의 속도와 진입률 및 차량별 교통량을 조사하여 VISSIM 시뮬레이션 분석을 통해 교통흐름의 개선정도를 검토하였다. 조사결과 곡선부의 단순화와 본선 교통흐름의 인지가능 시점인 노즈부에서 부터 전체차량의 74.0 %가 연결로 규정속도 이상으로 주행하였고, 가속차로 길이대비 0.8 l 지점까지 88.6 %의 차량이 본선으로 진입하였다. 실측교통량을 기반으로 연결로 유입부를 0.265 l 지점까지 의도적으로 본선으로의 교통진입을 제한하여 시뮬레이션한 결과 본선과 연결로의 흐름을 평균속도 60.1 km/h에서 68.5 km/h까지 개선할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.397-403
• /
• 2000

In the present study, flow characteristics of turbulent pulsating flow in a square-sectional $180^{\circ}$ curved duct were experimentally investigated. Experimental studies for air flows were conducted to measure axial velocity and wall shear stress distributions and entrance length in a square-sectional $180^{\circ}$ curved duct by using the LDV with the data acquisition and the processing system. The experiment was conducted in seven sections from the inlet (${\phi}=0^{\circ}$) to the outlet (${\phi}=180^{\circ}$) at $30^{\circ}$ intervals of the duct. The results obtained from the experimentation were summarized as follows ; (1) When the ratio of velocity amplitude ($A_1$) was less than one, there was hardly any velocity change in the section except near the wall and any change in axial velocity distributions along the phase. When the ratio of velocity amplitude ($A_1$) was 0.6, the change rate of velocity was slow. (2) Wall shear stress distributions of turbulent pulsating flow were similar to those of turbulent steady flow. The value of the wall shear stress became minimum in the inner wall aid gradually increased toward the outer wall where it became maximum. (3) The entrance length of turbulent pulsating flow reached near the region of bend angle of $90^{\circ}$, like that of turbulent steady flow. The entrance length was changed by the dimensionless angular frequency (${\omega}^+$).

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.167-173
• /
• 2009

일반적으로 사용되는 고속도로 합류부 영향권은 합류지점을 중심으로 상류 100m, 하류 400m를 포함하는 총 500m로 정의된다. 그러나 실제 합류부의 교통류특성은 하류부보다는 상류부에 합류영향이 크게 미치는 것으로 관찰된다. 따라서 본 연구에서는 고속도로 우측합류부 및 좌측합류부를 대상으로 차량간 상충으로 정의되는 난류현상을 이용하여 고속도로 합류부의 영향권을 분석하였다. 약 500m 간격으로 설치되어있는 현재의 교통류검지체계의 한계를 극복하기 위하여 동일한 도로조건의 합류부지점에 설치되어있는 교통류검지기를 통하여 수집된 원시데이터를 이용하였다. 각 지점별 데이터를 유사한 교통 조건으로 구분하기 위하여 도로의 서비스수준을 기준으로 총 72시간의 데이터를 분류하였다. 교통류 난류현상의 분석기준을 속도의 표준편차로 규정하고 분석한 결과, 우측합류부와 좌측합류부 모두 합류부의 직접 영향을 받는 구간으로 상류부 300m에서 하류부 400m까지 약 700m 구간이 도출되었으며 이는 기존의 영향권보다 상류부로 200m확장된 영역을 포함하는 결과이다.

• 컴퓨터교육학회논문지
• /
• 제12권3호
• /
• pp.1-10
• /
• 2009

현행 대학수학능력시험 직업탐구영역 정보 컴퓨터 관련 교과들의 '탐구' 영역의 평가준거는 4개로 제시되어 있으며 구체성이 떨어져 '탐구' 영역에 적합한 문항 개발이 어렵다. 본 연구에서는 직업탐구영역의 정보 컴퓨터 관련 교과들의 '탐구' 영역에 대한 평가준거를 개발하고자 하였다. 국내외의 정보 컴퓨터 관련 교과들의 대학입시 문항과 대학의 정보 컴퓨터 관련 학과의 교육과정 이수를 위한 수행능력을 분석하여 평가준거를 설계하였고, 전문가 집단의 타당도를 이용해 수정하였다. '탐구' 영역의 평가 준거를 '분석', '종합', '평가' 영역으로 구분하였다. '분석' 영역에 적합한 평가준거는 3개, '종합' 영역은6개, '평가' 영역은 2개로 선정하고, 이에 적합한 예시 평가 도구를 함께 제시하였다.