• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.784-786
• /
• 1995

Variable Structure Control(VSC) scheme with sliding mode is widely used to keep a control system insensitive to parameter variations and disturbances. However, the conventional sliding mode control has the undesired phenomenon of chattering which may become a serious problem. Also the restriction of the sliding mode regime cannot guarantee the insensitivity throughout an entire response. In this paper, the sliding surfaces, which are composed of three-line segments, are used to remove the reaching phase. Also, the concept of fuzzy logic is incorporated with the sliding mode control in order to control the unknown or partially known systems effectively. The proposed method is applied to a Double-Sided MM Type LDM to show its usefulness.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2464-2476
• /
• 2021

Direct-contact heat transfer of a single saturated droplet upon colliding with a heated wall in the regime of film boiling was experimentally investigated using high-resolution infrared thermometry technique. This technique provides transient local wall heat flux distributions during the entire collision period. In addition, various physical parameters relevant to the mechanistic modelling of these phenomena can be measured. The obtained results show that when single droplets dynamically collide with a heated surface during film boiling above the Leidenfrost point temperature, typically determined by droplet collision dynamics without considering thermal interactions, small spots of high heat flux due to localized wetting during the collision appear as increasing We_n. A systematic comparison revealed that existing theoretical models do not consider these observed physical phenomena and have lacks in accurately predicting the amount of direct-contact heat transfer. The necessity of developing an improved model to account for the effects of local wetting during the direct-contact heat transfer process is emphasized.

• Analyses & Alternatives
• /
• v.6 no.1
• /
• pp.115-162
• /
• 2022

The Rules of the Workers' Party of Korea (WPK), revised at the eighth Party Congress in 2021, reflect the Kim Jong Un regime's changes in strategic lines and ideological justifications on North Korea's socialism and communism, and its recent stances against the external environment. Moreover, they contain critical changes in the party's organizational system encompassing the central and the provinces. This study explores the organizational changes of the "monolithic guidance system of the party core" stipulated by the new party rules in January 2021, based on the analysis of the entire nine revised rules of the WPK since 1945. In the 2021 Party Congress, the Kim Jong Un regime, which officially came to power after the fourth Party Conference in 2012, has institutionalized the monolithic guidance system centered on the party core, or the head of state, Kim Jong Un. The newly set leadership and execution system, which reorganized party, government, and military organizational structure and accompanied the relevant personnel changes, was derived from the attempts for reinstating the Kim Jong Un regime as a more normalized party-state structure before its 10th year in power in April 2022. The "monolithic leadership system of the party core" established a system of "organizational leadership" through the organization of the Central Committee, directed by the Party Head, or General Secretary. The institutionalization of the new system resulted from the ten-year development of the revival of the party-state structure, which compromised the status of the military and reconfirmed the party's control of the military. This study explains the new system from the perspectives of both institutionalization and top-down unity, shedding light on the new party-military-government relations of the Kim Jong Un regime. The analysis contributes to a better understanding and forecasting of the Kim Jong Un regime's governance, which currently strengthens the monolithic leadership system as a crisis management system in the face of the "triple hardships" of sanctions, Covid and disaster.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.432-445
• /
• 1994

From a theoretical analysis point of view, the 2-stage precipitator is decomposed into two units: charging cell and collecting cell. Collection efficiency predictions of the two-stage parallel-plate electrostatic precipitator have been performed theoretically incorporating with the charging and the collecting cells. Particle trajectorise passing the charging cell have been modeled as a simple one. Particle charge distribution at the outlet of the charging cell is calculated through integration of the present unipolar combined charging rate along the entire particle trajectory, and average charge of particles at the outlet of the charging cell is obtained from the particle charge distribution. As for the collecting cell, the diminution of particle concentration along the longitudinal direction of the collecting cell is investigated considering the conventional Deutsch's theory and the laminar theory. One should note that the collection efficiency formula derived is based on monodisperse aerosols. It has been confirmed through the analysis that predictions of particle charge by applying White's unipolar diffusion charging theory overpredict actual cases in the continuum regime, while predictions by Fuch's unipolar diffusion charging theory indicate the reasonable result in the same regime. Theoretical predictions of collection efficiency are also compared with the available experimental results. Comparisons show that the experimental results are consistently located in the collection efficiency region bounded by the two limits, the Deutsch and the laminar collection efficiencies. Finally design parameters of the 2-stage electrostatic precipitator have been investigated systematically through the one-variable-at-a-time method in terms of collection efficiency. Applied voltages on the corona wire of the charging cell and the plate of the collecting cell, and the average air velocity have been selected as the design parameters.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.345-353
• /
• 1987

An analysis is performed to study flow and heat transfer characteristics of mixed free and forced convection about a sphere. Nonsimilar boundary layer equations which are valid over the entire regime of mixed convection are derived in terms of the mixed convection parameter, Gr/Re$^{2}$, through a dimensional analysis. The transformed conservation equations are solved by a finite difference method for the whole range of mixed convection regime. Numerical results for fluids having the Prandtl number 0.7 and 7 are presented. As the mixed convection parameter increases, the local friction coefficient and local heat transfer coefficient increases as well. For small Prandtl number, the friction coefficient is larger, while for large Prandtl number, the heat transfer coefficient is larger. Natural convection effect on the forced flow is more sensitive for small Prandtl number fluid. Flow separation migrates rearward as an increase in the mixed convection parameter. For small Prandtl number, the buoyancy effect is relatively small so that the flow separation occurs earlier.

• The Korean Journal of Archival Studies
• /
• no.10
• /
• pp.324-370
• /
• 2004

This paper aims to research the historical development of the archival systems in the Soviet Union from 1917 to the 1920's. The Russian revolution was the turning point not only for the political and social changes but for the archival administration in Russia, as it provided the new Soviet regime with the chances to reorganize the archival institutions under Bolshevik rule. However, we must not forget the fact that the Russian Archival Workers' Union had taken part in the organization of the archival systems together with the Bolshevik revolutionaries. The Soviet government intended to transform the decentralized and poorly organized archival systems in the prerevolutionary years into the centralized and bureaucratized ones. In this meaning, the decree signed be V. I. Lenin on 1 June 1918 was estimated as the real basis for the Soviet archival centralization. Lenin's archival decree of 1918 encompassed the entire national documentary legacy, which was gradually extended to all types and categories of manuscripts and archival records by successive legislation. The concept of state proprietorship of all documentary records was designated "Single State Archival Fond"(Edinyi Gosudarstvennyi arkhivnyi fond), which was renamed as "Archival Fond of the Russian Federation" after the collapse of the USSR. The independent state administrative agency, that is, "Main Administration of Archival Affairs"(Glavnoe upravlenie arkhivnym delom) was charged with the management of the entire "Single State Archival Fond". While the Soviet Union reorganized its archival systems in the twenties, the archival institutions became under the severe control of the government. For example, M. N. Pokrovskii, the well-known Marxist historian and the political leader, headed the organizational work of archives in the Soviet Union, which resulted in the exclusion of the prerevolutionary specialists from the archival field in the Soviet Union. However, the discussions over the concept of "the Archival Fond" by B. I. Anfilov helped to develop the archival theories in the USSR in the twenties. In conclusion, the Soviet Union, having emphasized the centralization of the archives, developed its archival systems from the early period, which were the basis of the systematic archival institutions in Russia.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.13-18
• /
• 2006

Ti-8Ta-3Nb, as a new biomaterial, was prepared by cast and swaging process. Their deformation behavior of Ti-8Ta-3Nb alloy has been characterized on the basis of its flow stress variation obtained from the true strain rate compression testing in the temperature of $700-900^{\circ}C$ and strain rate of $0.001-10\;s^{-1}$. At the strain rates lower than $0.1\;s^{-1}$ and the all temperature ranges which consist of two phase ${\alpha}+{\beta}$ as well as single ${\beta}$ phase fields, the flow curves show a small degree of flow softening behavior. In contrast, the shapes of the flow curves at other strain rates indicate unstable behavior. The shapes of the flow curves were similar in both as-cast and swaged specimen as well as in both ${\alpha}+{\beta}$ phase and ${\beta}$ phase. The flow stress data did not obey the kinetic rate equation over the entire regime of testing but a good fit has been obtained in the intermediate range of temperatures ($750-850^{\circ}C$). In this range, a stress exponent value of about 7.7 in as-cast specimens and about 6.2 in swaged specimens with an apparent activation energy of about 300 kJ/mol and about 206 kJ/mol respectively have been evaluated.

• Water for future
• /
• v.21 no.2
• /
• pp.183-192
• /
• 1988

The previous two-dimensional non-linear tidal model of the East China Sea(Choi, 1980) has been further refined to resolve the flow over the ocntinental shelf in more detail. The mesh resolution of the present finite-difference grid system used is 4 minutes latitude by 5 minutes longitude over the entire shelf. The developed fine grid two-dimensional model was utilized to reproduce the $M_2$ tide and $M_4$ tide for the East China Sea contnental shelf. There is general agreement between the model results and the current observation made in the Eastern Yellow Sea, which supports the calculated tidal regime over the shelf. Some preliminary results on maximum bottom stress and tidally-induced residual current were also examined and discussed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.753-758
• /
• 2013

Molecular dynamics (MD) simulations have been used to study the diffusion behavior of small gas molecules ($CO_2$) in polyethylene terephthalate (PET)/polylactide (PLA) blends. The Flory-Huggins interaction parameters (${\chi}$) determined from the cohesive energy densities are smaller than the critical value of Flory-Huggins interaction parameters (${\chi}_{critical}$), and that indicates the good compatibility of PET/PLA blends. The diffusion coefficients of $CO_2$ are determined via MD simulations at 298 K. That the order of diffusion coefficients is correlated with the availably fractional free volume (FFV) of $CO_2$ in the PET/PLA blends means that the FFV plays a vital role in the diffusion behavior of $CO_2$ molecules in PET/PLA blends. The slopes of the log (MSD) as a function of log (t) are close to unity over the entire composition range of PET/PLA blends, which confirmes the feasibility of MD approach reaches the normal diffusion regime of $CO_2$ in PET/PLA blends.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.104-112
• /
• 2012

BACKGROUND: Agricultural inputs (fertilizer and organic inputs) and water conditions can influence $CH_4$ and $CO_2$ emission from agricultural soils. This study was conducted to investigate the effects of agricultural inputs (fertilizer and organic inputs) under changing water regime on $CH_4$ and $CO_2$ emission from a soil in a laboratory incubation experiment. METHODS AND RESULTS: Four treatments were laid out: control without input and three type of agricultural inputs ($(NH_4)_2SO_4$, AS; pig manure compost, PMC; hairy vetch, HV). Fertilizer and organic inputs were mixed with 25 g of soil at 2.75 mg N/25 g soil (equivalent to 110 kg N/ha) in a bottle with septum, and incubated for 60 days. During the first 30-days incubation, the soil was waterlogged (1 cm of water depth) by adding distilled water weekly, and on 30 days of incubation, excess water was discarded then incubated up to 60 days without addition of water. Based on the redox potential, water regime could be classified into wetting (1 to 30 days), transition (31 to 40 days), and drying periods (41 to 60 days). Across the entire period, $CH_4$ and $CO_2$ flux ranged from 0 to 13.8 mg $CH_4$/m/day and from 0.4~1.9 g $CO_2$/m/day, and both were relatively higher in the early wetting period and the boundary between transition and drying periods. During the entire period, % loss of C relative to the initial was highest in HV (16.4%) followed by AS (8.1%), PMC (7.5%), and control (5.4%), indicating readily decomposability of HV. Accordingly, both $CH_4$ and $CO_2$ fluxes were greatest in HV treatment. Meanwhile, the lower $CH_4$ flux in AS and PMC treatments than the control was ascribed to reduction in $CH_4$ generation due to the presence of oxidized compounds such as ${SO_4}^{2-}$, $Fe^{3+}$, $Mn^{4+}$, and ${NO_3}^-$ that compete with precursors of $CH_4$ for electrons. CONCLUSION: Green manure such as HV can replace synthetic fertilizer in terms of N input, however, it may increase $CH_4$ emission from soils. Therefore, co-application of green manure and livestock manure compost needs to be considered in order to achieve satisfactory N supply and to mitigate $CH_4$ and $CO_2$ emission.