• 제목/요약/키워드: Engineering subject

검색결과 3,158건 처리시간 0.026초

"Computer Programming IV" as Capstone Design and Laboratory Attachment

  • Yokoyama, Shoichi
    • 공학교육연구
    • /
    • 제15권5호
    • /
    • pp.31-35
    • /
    • 2012
  • A new obligatory subject, Computer Programming IV, is organized in the Department of Informatics, Faculty of Engineering, Yamagata University. The purposes of the subject are as follows: (1) Attachment to each laboratory for bachelor thesis was usually at the initial stage of the student's fourth academic year. This subject actually moves up the attachment because students are tentatively attached to a laboratory for this subject. The interval to complete their bachelor thesis is extended by half a year. (2) In each laboratory, students cooperate with each other to complete their project. The project becomes capstone design which JABEE (Japan Accreditation Board for Engineering Education) is recently emphasizing. We not only explain the introduction of this subject, but also report some case studies.

A Novel Journal Evaluation Metric that Adjusts the Impact Factors across Different Subject Categories

  • Pyo, Sujin;Lee, Woojin;Lee, Jaewook
    • Industrial Engineering and Management Systems
    • /
    • 제15권1호
    • /
    • pp.99-109
    • /
    • 2016
  • During the last two decades, impact factor has been widely used as a journal evaluation metric that differentiates the influence of a specific journal compared with other journals. However, impact factor does not provide a reliable metric between journals in different subject categories. For example, higher impact factors are given to biology and general sciences than those assigned to other traditional engineering and social sciences. This study initially analyzes the trend of the time series of the impact factors of the journals listed in Journal Citation Reports during the last decade. This study then proposes new journal evaluation metrics that adjust the impact factors across different subject categories. The proposed metrics possibly provides a consistent measure to mitigate the differences in impact factors among subject categories. On the basis of experimental results, we recommend the most reliable and appropriate metric to evaluate journals that are less dependent on the characteristics of subject categories.

국내 초·중등 공학 교육 연구 동향 분석 (Research Trends and Issues of Engineering Education in Korean Elementary and Secondary Education)

  • 이은상
    • 공학교육연구
    • /
    • 제18권4호
    • /
    • pp.45-56
    • /
    • 2015
  • The goal of this study was to analyze the research trends of engineering education in elementary and secondary education. To accomplish this goal, this study analyzed the journal papers by 'published year', 'research topic', 'research subject', 'research method' and 'related school subject'. Followings are the results of this study. First, regarding the published year, the studies related to the elementary and secondary school level engineering education had been conducted 1 to 3 pieces intermittently from 1995 to 2009. And the number of studies are more than 5 pieces after 2010. Second, regarding the research topic, the number of study followed by 'investigation for current status', 'tendency analysis', 'development of teaching method or model', 'verification of teaching method/models' effect'. Third, regarding the research subject, the number of study followed by 'student', 'literature', 'professor', 'teacher'. Fourth, regarding the research method, the number of study followed by 'survey research' and 'literature research', 'qualitative research', 'experimental research' and 'integrated research'. Fifth, regarding the related subject, the number of study followed by 'science', 'technology', 'mathematics', 'practical arts'. Based on the results of this study, there are the needs for further studies to establish theoretical foundation on the engineering content elements in elementary and secondary school level, analyze on related variables and effects, develop engineering assessment instrument, use a variety of research methods, and conduct study on the applications of engineering in math subject.

Women in Engineering Subject and Education

  • Youn, Jong-Tae;Choi, Song-Ah;Park, Eun-Ji
    • 공학교육연구
    • /
    • 제17권5호
    • /
    • pp.8-12
    • /
    • 2014
  • Women in engineering subject were developed for women included engineering education in Korea. Women in the predominantly male-oriented college of engineering which is afflicted by the high dropout rate and the low employment rate of coeds in their majoring fields because of the die-hard male dominant culture. In order to resolve the related problems, Our University has been actively engaged in a movement called "Women into Engineering" (WIE) to raise the gender cognitive awareness and to train women engineers for highly qualified work force. As part of the movement, a subject called "Women in Engineering" that focuses on the gender cognitive perspective is effective to reduce the dropout rate and to land a job inside their fields by stimulating their interest in their specialty made soft/hard skills. The study was conducted a survey of the coeds who have completed the "Women in Engineering" course to evaluate the degree of satisfaction perceived, and a t-test through comparing the group of the coeds and a group of coeds who have not taken the course. The results showed statistically significant responses indicating that both groups of coeds would like to see WIE offer more basic engineering courses like "Women in Engineering." This may lay the foundation to offer other major engineering courses for juniors and seniors that emphasize the gender cognitive approach.

고등학교 공학 교과 교육과정 텍스트 네트워크 분석 (Analysis of Text Network of The High School Engineering Subject Curriculum)

  • 정해영;허혜연
    • 공학교육연구
    • /
    • 제26권5호
    • /
    • pp.29-41
    • /
    • 2023
  • Using text network analysis, this research aimed to identify significant keywords associated with each period of the revised High School Engineering curriculum from 2009-2022 and to examine their interrelationships in order to analyse the observed changes. The results of this study can be summarised as follows. Firstly, a significant increase in the number of words was observed throughout the curriculum revisions, with prominent occurrences of terms such as 'engineering', 'understanding', 'problem', 'solution', 'learning', 'evaluation' and 'diversity'. Secondly, network analysis and examination of connection centrality for each subject revealed the connection relationship that represented distinct subject characteristics. Thirdly, the study of the engineering curriculum revealed shifts in emphasised content with each revision. Based on these findings, recommendations were formulated. Firstly, given the growing importance of engineering, it is imperative to conduct systematic research on engineering education in primary and secondary school contexts. Secondly, efforts should be made to strengthen the link between Engineering and Technogy・Home-economics subjects in secondary schools. Finally, high school engineering subjects should be used not only to explore engineering careers, but also to cultivate talents with interdisciplinary expertise.

공과대학생들의 학습지원을 위한 수학클리닉 프로그램별 교과만족도 차이 연구 (The effects on subject satisfaction of math-clinic programs for learning support in engineering students)

  • 최원영;김성환;손정숙
    • 공학교육연구
    • /
    • 제19권5호
    • /
    • pp.48-56
    • /
    • 2016
  • The purpose of this study is to introduce the math-clinic programs which offer to engineering students and to compare the subject satisfaction between participants and non-participants. Five math-clinic programs are operated and 1397 students took part in this study. As a result, the Likert-type scales of satisfaction with three programs; the exercise problems solving class, the tutoring program and the achievement tests, were 4.07, 4.05 and 3.95, respectively(5-point Likert-type scale). And we found that the participants expressed higher subject satisfactions than nonparticipations did.

An intelligent hybrid methodology of on-line system-level fault diagnosis for nuclear power plant

  • Peng, Min-jun;Wang, Hang;Chen, Shan-shan;Xia, Geng-lei;Liu, Yong-kuo;Yang, Xu;Ayodeji, Abiodun
    • Nuclear Engineering and Technology
    • /
    • 제50권3호
    • /
    • pp.396-410
    • /
    • 2018
  • To assist operators to properly assess the current situation of the plant, accurate fault diagnosis methodology should be available and used. A reliable fault diagnosis method is beneficial for the safety of nuclear power plants. The major idea proposed in this work is integrating the merits of different fault diagnosis methodologies to offset their obvious disadvantages and enhance the accuracy and credibility of on-line fault diagnosis. This methodology uses the principle component analysis-based model and multi-flow model to diagnose fault type. To ensure the accuracy of results from the multi-flow model, a mechanical simulation model is implemented to do the quantitative calculation. More significantly, mechanism simulation is implemented to provide training data with fault signatures. Furthermore, one of the distance formulas in similarity measurement-Mahalanobis distance-is applied for on-line failure degree evaluation. The performance of this methodology was evaluated by applying it to the reactor coolant system of a pressurized water reactor. The results of simulation analysis show the effectiveness and accuracy of this methodology, leading to better confidence of it being integrated as a part of the computerized operator support system to assist operators in decision-making.

Engineered Surfaces Part 1. - A Philosophy of Manufacture

  • Stout, Kenneth. J.
    • Journal of Mechanical Science and Technology
    • /
    • 제14권1호
    • /
    • pp.72-83
    • /
    • 2000
  • In recent years considerable progress has been made in the characterisation of surface finish in three dimensions, and in the development of protocols which can be used for international standardisation. Although the subject as it has currently developed has much further to go if the process of surface characterisation is to impact on manufacture, control and specification of the manufacturing process itself. Researchers in this important area are beginning to realise that if the subject is to have great impact on manufacturing industries, surface characterisation must be broadened to include measures of surface integrity of the component and in addition be related to the functional demands imposed on the surface. The functional demands being a requirement of the engineering situation in which the components are employed. If these three factors are considered simultaneously, surface characterisation, surface integrity and component function, then a new and important subject is born, the subject of the Engineered Surface. Part 1 of this paper attempts to draw together the elements which go together to create the subject, 'The Engineered Surface'. The paper presents a method by which this important subject can be developed to the benefit of manufacturing industries. The paper also discusses the importance of a co-ordinated approach to the subject and the way that information can be documented to eventually provide a useful atlas of controlling parameters which are essential for a range of material processing industries as they strive to meet the ever more stringent and cost effective requirements of the manufacture.

  • PDF

해부학적 기능을 고려한 환자맞춤형 근위대퇴골 모델의 파라메트릭 변형 방안 (Parametric morphing of subject-specific NURBS models for Human Proximal Femurs Subject to Femoral Functions)

  • 박병건;채제욱;김재정
    • 한국CDE학회논문집
    • /
    • 제16권6호
    • /
    • pp.458-466
    • /
    • 2011
  • The morphology of a bone is closely associated with its biomechanical response. Thus, much research has been focused on analyzing the effects of variation of bone morphology with subject-specific models. Subject-specific models, which are generally achieved from 3D imaging devices like CT and MRI, incorporate more of the detailed information that makes a model unique. Hence, it may predict individual responses more accurately. Despite these powerful characteristics, specific models are not easily parameterized to the extent possible with statistical models because of their morphologic complexities. Thus, it is still proven challenging to analyze morphologic variations of subject-specific models across changes due to aging or disease. The aim of this article is to propose a generic and robust parametric morphing method for a subject-specific bone structure. We demonstrate this by using the proposed method on a model of a human proximal femur. Automatic segmentation algorithms are also presented to parameterize the specific model efficiently. A total of 48 femur models were evaluated for defining morphing vector fields. Also, several anatomical and mechanical functions of femur were considered as morphing constraints, and the NURBS interpolating technique was applied in the method to guarantee the generality of our morphed results.

해기사 국가 자격 시험 실증 분석 (An Empirical Analysis on the Certificate Examination for Marine Officer)

  • 박종운;이학헌
    • 수산해양교육연구
    • /
    • 제19권1호
    • /
    • pp.19-28
    • /
    • 2007
  • The aim of this study is to analyze the frequency of the mark points of all examination subjects, the correlation between all examination subjects and the factors to influence pass of the examination. The methodology of this study are as follows.1. The descriptive analysis mark points of the examination subjects. 2. The correlation analysis between the examination subjects. 3. The multiple regression analysis among the examination subjects. Every mark points tend to be changed in wide ranges according to the student's learning ability. On the certificates examination for marine officers, Students in deck part recorded higher in rate of successful applicants, but showed more subject failure than those in engine part. It is especially suggested for the students to improve the teaching and learning skills of the subject. The high correlation subject to total and average points were found in English subject. The high correlation subject was shown between English & Ship handling, Engineering 1&2 and English & Engineering 1,2,3. The most influential subjects to pass the examination were Navigation, English, Engineering 3.