• 제목/요약/키워드: Engineering property

검색결과 8,384건 처리시간 0.035초

Development of an Intellectual Property Core for Floating Point Calculation for Safety Critical MMIS

  • Mwilongo, Nelson Josephat;Jung, Jae Cheon
    • 시스템엔지니어링학술지
    • /
    • 제17권2호
    • /
    • pp.37-48
    • /
    • 2021
  • Improving the plant protection system against unforeseen changes/transients during operation is essential to maintain plant safety. Under this condition, it requires rapid and accurate signal processing. The use of an Intellectual Property (IP) core for floating point calculations for Safety Critical MMIS can make numerical computations easier and more precise, improving system accuracy. It can represent and manipulate rational numbers as well as a much broader range of values with dynamic range in nuclear power plant. Systems engineering approach (SE) is used through the development process, it helps to reduce complexity and avoid omissions and invalid assumptions as delivers a better understanding of the stakeholders needs. For the implementation on the FPGA target board, the 32-bit floating-point arithmetic with IEEE-754 standards has designed using Simulink model in Matlab for all operations of addition, subtraction, multiplication and division and VHDL code generated.

490MPa급 플럭스코어드 와이어의 스패터, 흄, 미세조직 및 기계적 성질에 미치는 Al, Mn, Si의 영향 (Effects of Al, Mn and Si Contents on Spatter, Fume, Microstructure and Mechanical Property with 490MPa Grade Flux Core Wire)

  • 김민철;정원정;이봉근;공종판;강정윤
    • Journal of Welding and Joining
    • /
    • 제28권1호
    • /
    • pp.60-65
    • /
    • 2010
  • This paper is concerned with effects of Al, Mn and Si contents on spatter, fume, microstructure and mechanical property with 490MPa Grade Flux Core Wire(FCW). Ten kinds of FCW were fabricated by varying Mn, Si and Al contents and each FCW was weld for check the amount of spatter and fume generations, microstructures and mechanical property. Amount of spatter and fume generations was decreased with the increasing Si contents and decreasing by Al contents in FCW. And, their microstructure of weld metal were changed by Mn, Al and Si contents in FCW. With increasing of Al and Si, acicular ferrite was fine and volume fraction of acicula ferrite was increased. Thereby leading to improvement of Charpy impact property and strength.

On Relationship between Safety and Liveness of Election Problem in Asynchronous Distributed Systems

  • Park, Sung-Hoon
    • International Journal of Contents
    • /
    • 제7권4호
    • /
    • pp.30-34
    • /
    • 2011
  • A Leader is a Coordinator that supports a set of processes to cooperate a given task. This concept is used in several domains such as distributed systems, parallelism and cooperative support for cooperative work. In completely asynchronous systems, there is no solution for the election problem satisfying both of safety and liveness properties in asynchronous distributed systems. Therefore, to solve the election problem in those systems, one property should be weaker than the other property. If an election algorithm strengthens the safety property in sacrifice of liveness property, it would not nearly progress. But on the contrary, an election algorithm strengthening the liveness property in sacrifice of the safety property would have the high probability of violating the safety property. In this paper, we presents a safety strengthened Leader Election protocol with an unreliable failure detector and analyses it in terms of safety and liveness properties in asynchronous distributed systems.

지식재산의 관리 측면에서 본 연구성과 지향형 연구개발을 위한 제언 (Suggestions for Outcome-Oriented R&D Activity in Terms of Intellectual Property Management)

  • 김승군;고명숙
    • Toxicological Research
    • /
    • 제23권2호
    • /
    • pp.115-121
    • /
    • 2007
  • Biotechnology is often described as the 'exploitation of biological processes for industrial purposes'. The last twenty years have seen phenomenal growth in this industry. The 21 century promises to see further advances in the field. However, since the cost of research is high, and the potential returns are linked to exclusivity, intellectual property protection is critical to this burgeoning industry. Without protection such investments in R&D would not be made and, the benefit that BT-related development are expected to bring, would not occur. BT industry are eager for high technology, and the technology must be transferred to a corporation from a research organization. In order to be successful, it is important that scientist must be directed toward R&D outcome beyond performance assessment. The process to gain a outcome involves multiple steps to turn the idea into the profit, and intellectual property issues are considered into the critical factors to affect the quality of R&D. The management of Intellectual property is very important in R&D. However, According to the survey conducted by KIIP (Korea Institute of Intellectual Property) and KOSEF (Korea Science and Engineering Foundation) in 2006, it is estimated the ability to treat Intellectual property is not sufficient because 82.5% of the respondents have not received an education. Governmental Support is needed to prompt systematically the ability of intellectual property management through education and consulting.

용접부의 선삭특성에 관한 실험적 연구 (An Experimental Study on the Turning Property of Welded Material)

  • 장복득
    • 한국정밀공학회지
    • /
    • 제3권3호
    • /
    • pp.13-21
    • /
    • 1986
  • Turning property of metal is affected by the cutting condition, tool geome- try and cutting material. But the turning property of welded material is not welknown. Welded structures usually contain nonhomogeneity, defects and resi- dual stresses due to differential contraction between welded metal and base metal. In this paper, authors conducted the experimental test on the turning property, by changing turning condition and welding electrodes of the welded specimens. The results obtained in these experimental tests are as follows; (1) Within the limit of this experimental test, the cutting force of the weld zone is bigger than that of base metal, and this phenomena is caused by the different mechanical property of the weld zone. The range of the variation of cutting force in the weld zone is caused by the nonhomogeneity of the weld zone, respectively. (2) The surface roughness follows the general characteristic of the effect of cutting condition on the surface roughness and the surface roughness of the weld zone shows coarse surface comparing with that of the base metal. (3) The specimen welded by the electrode E4301, shows worse cutting property than that of E4361 and E4313.

  • PDF

후코이단의 보습제 및 화장품재료로서 특성 (Properties of Fucoidan as Raw Materials of Water-holding Cream and Cosmetics)

  • 차성한;이정식;김영숙;김동욱;문재천;박권필
    • Korean Chemical Engineering Research
    • /
    • 제48권1호
    • /
    • pp.27-32
    • /
    • 2010
  • 후코이단을 보습제 및 기능성화장품 소재로 사용하기 위한 후코이단 특성 및 그 효과에 대해 연구하였다. 후코이단은 미역 포자엽에서 추출하였다. 화장품 소재 시험으로는 보습력 측정, 항산화(DPPH assay, radical scavenging), 안전성(MTT assay)을 실시하였다. 후코이단의 보습력은 최고의 보습제 중의 하나인 히아루론산의 보습력보다 높았고, 분자량이 감소함에 따라 보습력이 약간 증가하였다. 후코이단은 높은 안전성과 항산화력을 보였다. 후코이단의 보습력 및 항알레르기 효과를 평가하기 위해 아토피 환자 46명에게 후코이단 크림을 6주간 적용하였다. 증상 정도를 나타내는 IGA 값이 3.04에서 2.15로 감소해 39.8%의 증상개선 효과가 있었다.

Investigation into the stability of ion beam treated inorganic alignment layer

  • Kim, Kyung-Chan;Ahn, Han-Jin;Kim, Jong-Bok;Hwang, Byung-Har;Baik, Hong-Koo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.328-329
    • /
    • 2005
  • Inorganic alignment layer (IAL) was deposited on an indium-tin-oxide (ITO) by using reactive sputtering deposition method. After deposited, IAL was irradiated by $Ar^+$ ion beam (IB) for liquid crystal (LC) alignment. IAL treated by various conditions such as IB energy, IB incident angle, and IB irradiation time had excellent alignment property and electro-optical property the same as that of PI. We investigated into the stability of ion beam treated IAL after a lapse of long time. However IAL irradiated IB did not occur degradation of electro-optical property. The results implied that IAL irradiated IB was adopted as LC alignment layer instead of rubbed polyimide.

  • PDF

Amorphous Selenium 의 광도전특성을 이용한 의료용 X선의 kVp 변화에 따른 선량 측정분석 (Measurement and Analysis of X-ray dosage change by variable kVp using the Photoconductive Property of Amorphous Selenium)

  • 조승열;최준영;임종덕;남상희
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1996년도 추계학술대회
    • /
    • pp.18-21
    • /
    • 1996
  • This research is the basical experiment for designing kVp meter using the photo-conductive property of Amorphous Selenium. At first, we charged the surface with A re discharge method, and changed the formed surface potential voltage by x-raying on that surface. As a result the variations of the surface charge increased by the rising kVp, while maintaining a constant exposure time and mA. We become to know that we can apply the photoconductive property of Amorphous Selenium in designing kVp meter.

  • PDF